
Open amiga sampler
echolevel/open-amiga-sampler
Open source schematics, parts lists and documentation for building generic mono Amiga sampler cartridges

Creative and artistic decisions on the lowest level.
Template is an open-source printed circuit board by ietsnut, from the ietsnut/Library-of-Lament repository on GitHub. It is a 2-layer board of 96.5 × 96.5 mm with 32 parts on 68 nets.
It is built around the CH552G, ADC0820CCN and 74HC165D, with the 74HC595 and SM410561N among its other parts. Its parts include 11 resistors, 7 capacitors, 6 ICs, 2 switches and 1 diode. It belongs with the 8051 (CH55x, STC, AT89) boards of this library.
This engine/game is a personal passion project, over several years. The main focus is finding the sweet spots between performance and quality, by utilizing creative and artistic decisions on the lowest level. It is fully 3D, with a custom window system (based on GLFW) uses Java, LWJGL 3, OpenGL 4.1 and more. Here are some screenshots from the last few years:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C5, C7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C6 |
| 2 | 5.1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
| 1 | 1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 74HC165 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | 74HC595 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | 74LS283 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | 74LS47 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ADC0820CCN | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U1 |
| 1 | BOOT | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | CH552G | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | SM410561N | EasyEDA:LED-SEG-TH_10P-L12.7-W19.0-P2.54-S15.24-BL | LED1 |
| 1 | TYPEC | EasyEDA:USB-C-SMD_TYPEC-302-BRP16SC16 | USB1 |

echolevel/open-amiga-sampler
Open source schematics, parts lists and documentation for building generic mono Amiga sampler cartridges



slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

slu4coder/Minimal-UART-Computer-3
Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
It measures 96.5 × 96.5 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the CH552G, ADC0820CCN, 74HC165D and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ietsnut/Library-of-Lament repository on GitHub, at the commit this page was made from: the board is assets/KiCAD/Template/Template.kicad_pcb and its schematic assets/KiCAD/ADC/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ietsnut before reusing the design.