

Powertran polysynth
Powertran/ETI polysynth
- Size
- 359.7 × 231.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 175
- Pads
- 685
- Tracks, vias
- 1,758, 95
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2020
- Updated
- 8 Feb 2026
Overview
Powertran polysynth is an open-source printed circuit board by icnagy, from the icnagy/powertran-polysynth repository on GitHub. It is a 2-layer board of 359.7 × 231.5 mm with 129 parts on 175 nets, routed with 1,758 tracks and 95 vias.
It is built around the LM13600MX, LM1458N and L7905, with the TIP41 and TIP42 among its other parts. Its parts include 43 resistors, 24 connectors, 18 capacitors, 13 ICs and 6 diodes.
Main components
5LM13600MX
SOIC-16Automatic gain control、Built-in filter Transconductance Amplifier SOIC-16 Special Purpose Amplifiers ROHSTexas InstrumentsSpecial Purpose AmplifiersLM1458N
PDIP-8-18V~18V 0℃~+70℃ 2 200nA 3mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierL7905
TO-220TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSKTPUncategorisedTIP41
TO-220TO-220 Bipolar (BJT) ROHSTFBipolar Transistors - BJTTIP42
TO-220-32W 30 3MHz 40V 6A 700uA PNP TO-220-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 9 | 1k0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R20, R21, R27, R29, RB31, RB34, RB37, RB40 |
| 8 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2, J3, J4, J6, J7, J11, J12 |
| 8 | Conn_01x25 | Connector_PinSocket_4.00mm:PinSocket_1x25_P4.00mm_Vertical | J13, J14, J15, J16, J17, J18, J19, J20 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R15, R18, R19, R24, R28 |
| 6 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R26, RA30, RA33, RA36, RA39 |
| 5 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, RC32, RC35, RC38, RC41 |
| 5 | 1n0 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C13 |
| 5 | 220nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C14, CB16, CB18, CB20, CB22 |
| 4 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7 |
| 4 | 1N4002 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | 1k5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8 |
| 4 | 470pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | CA15, CA17, CA19, CA21 |
| 4 | LF353 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U6, U8, U9, U11 |
| 3 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7, C9, C11 |
| 3 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22, R23, R25 |
| 3 | Conn_01x25 | Connector_PinSocket_2.54mm:PinSocket_1x25_P2.54mm_Vertical | J10, J21, J22 |
| 3 | Heatsink | Heatsink:Heatsink_Stonecold_HS-132_32x14mm_2xFixation1.5mm | HS1, HS2, HS3 |
| 3 | LM13600 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U7, U10, U13 |
| 2 | 1N4148 | Diode_THT:D_DO-15_P12.70mm_Horizontal | D5, D6 |
| 2 | 1R0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R17 |
| 2 | 2200uF | Capacitor_THT:CP_Axial_L20.0mm_D13.0mm_P26.00mm_Horizontal | C5, C6 |
| 2 | BC212L | Package_TO_SOT_THT:TO-92L_Wide | Q1, Q2 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8, J9 |
| 2 | LM1458 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U4, U5 |
| 2 | LM741 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2, U12 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R42 |
| 1 | 10V | Diode_THT:D_DO-15_P10.16mm_Horizontal | ZD1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C10 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C12 |
| 1 | 12k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 1k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 270k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R43 |
| 1 | 330pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 5V1 | Diode_THT:D_DO-15_P10.16mm_Horizontal | ZD2 |
| 1 | Conn_01x01 | Connector_Wire:SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm | J26 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J23 |
| 1 | L7905 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM723_DIP14 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | R_POT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV_PITCH_BEND1 |
| 1 | R_POT_TRIM_US | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV1 |
| 1 | TIP41 | Package_TO_SOT_THT:TO-220-3_Vertical | Q4 |
| 1 | TIP42 | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
More from icnagy/powertran-polysynth
5- 2 layers236.9 × 126.6 mm

- 2 layers436.5 × 270.4 mm

- 2 layers349.3 × 160 mm

- 2 layers688.3 × 86.4 mm

- 2 layers180.8 × 191.8 mm

Similar boards
- 2 layers88.9 × 44.5 mm

Penfold VCO
ali5ter/Penfold_VCO
🎛️ R.A. Penfold's VCO design adapted as a Eurorack powered module
33 partsMIT - 2 layers99.3 × 98.6 mm

FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13 - 2 layers100 × 100 mm

KicadJE EuroPowerSupply
promesoft/KicadJE-EuroPowerSupply
Takes a Laptop 19V input and makes +-12 and 5 v out
107 parts8MIT - 2 layers77.5 × 50.8 mm

Protection board
Markus-Fitz/Protection-board
Speaker-protection board for power amplifier.
71 parts1GPL-3.0 - 2 layers65 × 85 mm

Function Generator
MUDAL/Function-Generator
Custom Function Generator designed and developed by Olaoluwa Raji. This project is a complete embedded system solution with both hardware and software implemented by me. Relevant reference materials are included.
30 parts1GPL-3.0 - 2 layers211.2 × 87.8 mm

- 2 layers55.7 × 48.7 mm

Amplifier
ANSHAD134/PCB-Files
A collection of my personal KiCad PCB design projects, custom symbol/footprint libraries, and 3D models used across different electronics builds.
20 parts - 2 layers158 × 64 mm

Questions
How big is the Powertran polysynth PCB?
It measures 359.7 × 231.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Powertran polysynth use?
129 parts, built around the LM13600MX, LM1458N, L7905 and TIP41. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Powertran polysynth KiCad files?
From the icnagy/powertran-polysynth repository on GitHub, at the commit this page was made from: the board is P4/P4.kicad_pcb and its schematic P1-2/P1-2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Powertran polysynth design in my own project?
Its repository states no licence, so its author keeps all rights: ask icnagy before reusing the design.