

SolarpowerPCB
Imperial College london rocketry Attempts to be Resourceful by Using Solar power. A CanSat for the Mach-22 Competition
- Size
- 60 × 60 mm
- Copper layers
- 2
- Thickness
- 0.65 mm
- Parts
- 142
- Nets
- 127
- Pads
- 439
- Tracks, vias
- 510, 100
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Apr 2022
- Updated
- 12 Sep 2022
Overview
SolarpowerPCB is an open-source printed circuit board by icl-rocketry, from the icl-rocketry/ICARUS repository on GitHub. It is a 2-layer board of 60 × 60 mm with 142 parts on 127 nets, routed with 510 tracks and 100 vias.
It is built around the ESP32-WROOM-32D, CP2102-GMR and SN65HVD230D, with the LM5118MH, LT3652EDD#PBF and MMDT2222A among its other parts. Its parts include 44 capacitors, 39 resistors, 13 diodes, 7 ICs and 6 connectors. It belongs with the ESP32 boards of this library.
Main components
7ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesCP2102-GMR
WQFN-28-EP(5x5)-40℃~+85℃ 1Mbps 20mA 3V~3.6V 80uA Transceiver USB 2.0 WQFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversLM5118MH
HTSSOP-20-EP-40℃~+125℃@(TJ) 1 3V~75V 50kHz~500kHz Adjustable Buck-Boost Buck-Boost Built-in No HTSSOP-20-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLT3652EDD#PBF
DFN-12(3x3)-40℃~+125℃ 14.4V 1~4 2A 4.95V~32V DFN-12(3x3) Battery Management ROHSAnalog DevicesBattery ManagementMMDT2222A
SOT-363-55℃~+150℃ 10nA 1V 2 NPN 200mW 300 300MHz 40V 600mA 6V NPN SOT-363 Bipolar (BJT) ROHShongjiachengBipolar (BJT)SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdICARUS
Imperial College london rocketry Attempts to be Resourceful by Using Solar power. A CanSat for the Mach-22 Competition
Parts
142| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistor_SMD:R_0603_1608Metric | R_Shunt1, R_Shunt2, R40, R41, R42, R43, R44, R45 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C11, C12, C17, C18, C19, C38 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C10, C20, C28, C29, C39 |
| 5 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C21, C40, C41, C42, C43 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R16, R17, R19 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R10, R11, R48 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R28 |
| 3 | , , | ||
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R30, R33, R47 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R12, R27, R29 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4, TP5 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R18, R22 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C23, C25 |
| 2 | 0.47u | Capacitor_SMD:C_0603_1608Metric | C46, C47 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C8, C30 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C31, C32 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C22 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C9 |
| 2 | 400k | Resistor_SMD:R_0603_1608Metric | R31, R34 |
| 2 | 47u | Capacitor_SMD:C_0603_1608Metric | C44, C45 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R23, R24 |
| 2 | 60 | Resistor_SMD:R_0603_1608Metric | R20, R21 |
| 2 | CMSH3-20MA | Diode_SMD:D_SOD-128 | D2, D10 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J5 |
| 2 | Q_NMOS_DGS | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3 |
| 2 | ~ | Capacitor_SMD:C_0603_1608Metric | C33, C34 |
| 2 | ~ | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | Patch1, Patch2 |
| 1 | 0.01nF | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 0.05 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 0.22-Current Sense | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 1.0uF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 1.6n | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 1000 | Resistor_SMD:R_0603_1608Metric | R38 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 15m | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 160pF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 17k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 17uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 18.3k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 220 pF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 220pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 24k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 332 | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 340k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 450k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 55nF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 560k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | ADS1219IPWT | ADS1219IPWT:SOP65P640X120-16N | U9 |
| 1 | Battery Connector | Connector_JST:JST_ACH_BM02B-ACHSS-GAN-ETF_1x02-1MP_P1.20mm_Vertical | J13 |
| 1 | CHRG LED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | CMSH1-20MA | Diode_SMD:D_SOD-128 | D6 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | I2C_OUT1 |
| 1 | Conn_01x06_Male | Connector_Molex:Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical | J4 |
| 1 | D | Diode_SMD:D_SOD-128 | D9 |
| 1 | D_Schottky_10V_1.5A | Diode_SMD:D_SOD-128 | D13 |
| 1 | D_Schottky_6V | Diode_SMD:D_SOD-128 | D14 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | FAULT LED | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | INTERFACE-CP2102-GMR(QFN28) | iclr:QFN28G_0.5-5X5MM | U5 |
| 1 | LM5118MH | Package_SO:Texas_PWP0020A | U6 |
| 1 | LOGO | iclr:iclr_logo | G*** |
| 1 | LOGO | iclr:icarus2.0 | G*** |
| 1 | LT1963AxST-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | LT3652EDD | Package_DFN_QFN:DFN-12-1EP_3x3mm_P0.45mm_EP1.66x2.38mm | U3 |
| 1 | MMDT2222A | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | SM712_SOT23 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D11 |
| 1 | Screw_Terminal_SolarPanel_Input | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TP_BAT | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | TP_Vout | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | TP_Vsolarpanel | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J6 |
The 139 most common of 142 parts.
Similar boards
- 4 layers100 × 60 mm

- 2 layers132 × 56 mm

Dashboard
marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module
127 partsApache-2.0 - 2 layers90 × 80 mm

VLAD
icl-rocketry/VLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition
103 parts1 - 4 layers127 × 46 mm

Motherboard
KhazAkar/espws
[MOVED to GitLab: https://gitlab.com//r3xxar/espws] Weather station firmware for ESP8266 - mirror
116 parts4MIT - 2 layers114.2 × 36.4 mm

Solar Power Regulator
Hirusha785/solar-battery-charge-controller-pcb
☀️ KiCad-based LT3652 solar battery charge controller PCB with solar input, battery charging terminals, charge/fault status header, adjustable control, schematic, PCB layout, and 3D renders.
30 parts - 4 layers68.6 × 86.4 mm

Solar Power Regulator PCB
Lee34667/PCB_Kicad_Projects
Creating a L9110 module using PCB techniques.
27 parts1 - 4 layers134.8 × 138.5 mm

- 4 layers89.8 × 92.5 mm

Questions
How big is the SolarpowerPCB PCB?
It measures 60 × 60 mm and has 2 copper layers, 0.65 mm thick.
What parts does the SolarpowerPCB use?
142 parts, built around the ESP32-WROOM-32D, CP2102-GMR, SN65HVD230D and LM5118MH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolarpowerPCB KiCad files?
From the icl-rocketry/ICARUS repository on GitHub, at the commit this page was made from: the board is Hardware/Solar Panel Electronics/solarpowerPCB.kicad_pcb and its schematic Hardware/Solar Panel Electronics/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolarpowerPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask icl-rocketry before reusing the design.