

Ricardo RicardoClassic
The original avionics board.
- Size
- 100 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 327
- Nets
- 143
- Pads
- 693
- Tracks, vias
- 1,221, 95
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Jul 2022
- Updated
- 11 Jul 2022
Overview
Ricardo RicardoClassic is an open-source printed circuit board by icl-rocketry, from the icl-rocketry/Ricardo-RicardoClassic repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 60 mm with 327 parts on 143 nets, routed with 1,221 tracks and 95 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-WROOM-32D and MAX-M8Q-0, with the SN65HVD230D, LTV-817S and LSM9DS1 among its other parts. Its parts include 40 resistors, 31 capacitors, 16 diodes, 12 ICs and 12 connectors. It belongs with the ESP32 boards of this library.
Main components
12CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB ConvertersESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX-M8Q-0
SMD-18P-167dBm -40℃~+85℃ 2.7V~3.6V GPS、BeiDou、Galileo、GLONASS UART、I2C SMD-18P GNSS Modules ROHSu-bloxGNSS ModulesSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversLTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsLSM9DS1
LGA-24(3x3.5)-40℃~+85℃ 1.9V~3.6V 16bit Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-24(3x3.5) Accelerometers ROHSSTMicroelectronicsAccelerometersMAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)UncategorisedRFM95W-868S2
16-SMD16-SMD New Arrivals ROHSHopeRF Micro-electronicsUncategorisedTPS63031DSK
UncategorisedTexas InstrumentsPMV20ENR
SOT-23-55℃~+150℃ 1 N-channel 1.2W 10.8nC@10V 21mΩ@10V 30V 35pF 435pF 7.6A SOT-23 MOSFETs ROHSNexperiaMOSFETsMMDT2222A
SOT-363-55℃~+150℃ 10nA 1V 2 NPN 200mW 300 300MHz 40V 600mA 6V NPN SOT-363 Bipolar (BJT) ROHShongjiachengBipolar (BJT)SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdAvionics
esp32 with integrated RaY TrAcInG for optimal performance
Did you ever hear the tragedy of Darth Plagueis the Wise? I thought not. It's not a story the Jedi would tell you. It's a Sith legend. Darth Plagueis was a Dark Lord of the Sith, so powerful and so wise he could use the Force to influence the midichlorians to create life... He had such a knowledge of the dark side that he could even keep the ones he cared about from dying. The dark side of the Force is a pathway to many abilities some consider to be unnatural. He became so powerful... the only thing he was afraid of was losing his power, which eventually, of course, he did. Unfortunately, he taught his apprentice everything he knew, then his apprentice killed him in his sleep. Ironic, he could save others from death, but not himself.
Parts
327| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +9 |
| 15 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R7, R8, R16, R17, R20, R23, R24, R26, R31, R37, R38, R39, R40 |
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C12, C14, C16, C18, C20, C22, C24, C26, C28, C31 |
| 13 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C13, C15, C17, C19, C21, C23, C25, C27, C29, C30 |
| 11 | 470 | Resistor_SMD:R_0603_1608Metric | R5, R9, R10, R11, R12, R13, R14, R15, R18, R19, R36 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R6, R27, R30, R32, R35 |
| 4 | 500 | Resistor_SMD:R_0603_1608Metric | R28, R29, R33, R34 |
| 4 | D_Schottky | Diode_SMD:D_SOD-123F | D8, D9, D11, D15 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 3 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10, J12 |
| 3 | PMV20ENR | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5 |
| 3 | Screw_Terminal_01x02 | iclr-hw:PHOENIX_1757242 | J6, J7, J8 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | CONTINUITY | LED_SMD:LED_0603_1608Metric_Castellated | D12, D16 |
| 2 | FIRING | LED_SMD:LED_0603_1608Metric_Castellated | D10, D14 |
| 2 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U9, U10 |
| 2 | RX_LED | LED_SMD:LED_0603_1608Metric_Castellated | D2, D4 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP5 |
| 2 | TX_LED | LED_SMD:LED_0603_1608Metric_Castellated | D3, D5 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 1u5 | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L2 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 43K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 8P8C_LED | Connector_RJ:RJ45_Amphenol_RJHSE538X | J2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | CABLE_DETECT | LED_SMD:LED_0603_1608Metric_Castellated | D7 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U1 |
| 1 | Conn_01x02_Male | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J11 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J5 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J4 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | LOGO | iclr-hw:iclr_logo | G*** |
| 1 | LOGO | iclr:ricardo_logo | G*** |
| 1 | LOGO | iclr-hw:MIT_logo | G*** |
| 1 | LSM9DS1 | Package_LGA:LGA-24L_3x3.5mm_P0.43mm | U7 |
| 1 | MAX-M8Q | RF_GPS:ublox_MAX | U6 |
| 1 | MAX40200AUK | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | MMDT2222A | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | MS5607-02BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U5 |
| 1 | Micro_SD_Card_Det | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | PWR_LED | LED_SMD:LED_0603_1608Metric_Castellated | D6 |
| 1 | RFM95W-868S2 | RF_Module:HOPERF_RFM9XW_SMD | U11 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | TPS63031 | iclr-hw:VSON-10-1EP_2.5x2.5mm_Pitch0.5mm_ThermalPad | U8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | USB_LED | LED_SMD:LED_0603_1608Metric_Castellated | D17 |
| 1 | W25Q64FV | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | XBEE | iclr-hw:XBEE | JP2 |
The 153 most common of 327 parts.
More from icl-rocketry/Ricardo-RicardoClassic
1- 4 layers100 × 60 mm

Similar boards
- 2 layers90 × 80 mm

VLAD
icl-rocketry/VLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition
103 parts1 - 4 layers30.5 × 82.6 mm

Circuit board design
ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society
87 parts12 - 2 layers94 × 94 mm

- 2 layers78.1 × 50.2 mm

- 4 layers57 × 74.3 mm

CM4
ybabs/H745FCS
Quadcopter Flight Controller based on the dual core STM32H745 Microcontroller
101 parts6 - 4 layers54.5 × 18 mm

- 2 layers60 × 60 mm

SolarpowerPCB
icl-rocketry/ICARUS
Imperial College london rocketry Attempts to be Resourceful by Using Solar power. A CanSat for the Mach-22 Competition
142 parts - 4 layers160 × 73.2 mm

MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39
Questions
How big is the Ricardo RicardoClassic PCB?
It measures 100 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ricardo RicardoClassic use?
327 parts, built around the CP2102N-A01-GQFN24, ESP32-WROOM-32D, MAX-M8Q-0 and SN65HVD230D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ricardo RicardoClassic KiCad files?
From the icl-rocketry/Ricardo-RicardoClassic repository on GitHub, at the commit this page was made from: the board is Mainboard.kicad_pcb and its schematic IMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ricardo RicardoClassic design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).