
Panelized
icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.

A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.
Remote is an open-source printed circuit board by icicl, from the icicl/led-scoreboard-pcb repository on GitHub. It is a 2-layer board of 53.3 × 78.7 mm with 31 parts on 26 nets, routed with 125 tracks and 4 vias.
It is built around the IRL 81A. Its parts include 8 diodes, 6 switches, 3 resistors, 2 capacitors and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | D | Diode_THT:D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D1, D2, D3, D4, D6, D7, D8 |
| 5 | SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm | SW1, SW3, SW4, SW5, SW6 |
| 2 | .01u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | Battery Holder Spring | digikey-footprints:Battery Holder Flat | -, + |
| 2 | Conn_01x01_Pin | digikey-footprints:Battery Holder Flat | J1, J2 |
| 1 | 32 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 3V0 | TestPoint:TestPoint_Pad_2.5x2.5mm | 3V0 |
| 1 | ClockQ | TestPoint:TestPoint_Pad_2.5x2.5mm | CLKQ1 |
| 1 | GND | TestPoint:TestPoint_Pad_2.5x2.5mm | GND1 |
| 1 | IRL81A | LED_THT:LED_SideEmitter_Rectangular_W4.5mm_H1.6mm | D5 |
| 1 | Q_Dual_NPN_NPN_E1B1C2E2B2C1 | digikey-footprints:SOT-363 | Q1 |
| 1 | SW_DIP_x02 | digikey-footprints:DIP-4_W7.62mm | SW2 |
| 1 | Signal1 | TestPoint:TestPoint_Pad_2.5x2.5mm | SIG1 |
| 1 | Signal2 | TestPoint:TestPoint_Pad_2.5x2.5mm | SIG2 |
| 1 | TLC555xD | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | ~ | digikey-footprints:SOIC-16_W3.90mm | U2 |

icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.

icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.

icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.



alexmohr/home_automation_plattform
PCB and schematic for my personal home automation plattform


Engr-umer-mohammed/Lynx-30-Camera-Trap
Low-power long-range wireless camera trap designed using KiCad and Simulink.



It measures 53.3 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the IRL 81A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the icicl/led-scoreboard-pcb repository on GitHub, at the commit this page was made from: the board is remote.kicad_pcb and its schematic brains.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask icicl before reusing the design.