
Face
icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.

A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.
Panelized is an open-source printed circuit board by icicl, from the icicl/led-scoreboard-pcb repository on GitHub. It is a 2-layer board of 229.9 × 125.7 mm with 81 parts on 137 nets, routed with 1,402 tracks and 242 vias.
It is built around the CC56-12EWA and IRL 81A. Its parts include 23 resistors, 11 transistors, 8 diodes, 7 ICs and 7 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100 | Resistor_SMD:R_0805_2012Metric | R2, R11, R12, R13, R14, R15, R16, R17, R18, R19, R37, R38, R39, R40, R41, R42 +4 |
| 10 | Q_Dual_NPN_PNP_E1B1C2E2B2C1 | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 7 | D | Diode_THT:D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp | D1, D2, D3, D4, D6, D7, D8 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | 3V3, CC1, CC2, CC3, CC4, GND1, IR1 |
| 5 | SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm | SW1, SW3, SW4, SW5, SW6 |
| 4 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | .01u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | Battery Holder Spring | digikey-footprints:Battery Holder Flat | -, + |
| 2 | CC56-12EWA | Display_7Segment:CA56-12EWA | U1, U2 |
| 2 | Conn_01x01_Pin | digikey-footprints:Battery Holder Flat | J1, J2 |
| 2 | HDSP-4850_2 | Display:HDSP-4850 | BAR1, BAR2 |
| 2 | ~ | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U4, U5 |
| 1 | 32 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 3V0 | TestPoint:TestPoint_Pad_2.5x2.5mm | 3V0 |
| 1 | ClockQ | TestPoint:TestPoint_Pad_2.5x2.5mm | CLKQ1 |
| 1 | Conn_02x13_Counter_Clockwise | Connector_IDC:IDC-Header_2x13_P2.54mm_Horizontal | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.5x2.5mm | GND1 |
| 1 | IRL81A | LED_THT:LED_SideEmitter_Rectangular_W4.5mm_H1.6mm | D5 |
| 1 | Q_Dual_NPN_NPN_E1B1C2E2B2C1 | digikey-footprints:SOT-363 | Q1 |
| 1 | SW_DIP_x02 | digikey-footprints:DIP-4_W7.62mm | SW2 |
| 1 | Signal1 | TestPoint:TestPoint_Pad_2.5x2.5mm | SIG1 |
| 1 | Signal2 | TestPoint:TestPoint_Pad_2.5x2.5mm | SIG2 |
| 1 | TLC555xD | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | TSOP21xx | OptoDevice:Vishay_MOLD-3Pin | U3 |
| 1 | ~ | digikey-footprints:SOIC-16_W3.90mm | U2 |
| 1 | ~ | Module:Raspberry Pi Pico | PICO |

icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.

icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.

icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.



alexmohr/home_automation_plattform
PCB and schematic for my personal home automation plattform


Engr-umer-mohammed/Lynx-30-Camera-Trap
Low-power long-range wireless camera trap designed using KiCad and Simulink.



It measures 229.9 × 125.7 mm and has 2 copper layers, 1.6 mm thick.
81 parts, built around the CC56-12EWA and IRL 81A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the icicl/led-scoreboard-pcb repository on GitHub, at the commit this page was made from: the board is panelized.kicad_pcb and its schematic brains.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask icicl before reusing the design.