

PSoC4 Breakout
A small breakout board for the PSoC 4 CY8CKIT-049 42xx prototyping kit
- Size
- 94 × 63.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 68
- Pads
- 150
- Tracks, vias
- 332, 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Mar 2015
- Updated
- 16 May 2015
Overview
PSoC4 Breakout is an open-source printed circuit board by icchalmers, from the icchalmers/FabAcademy_PSoC4_Breakout repository on GitHub. It is a 2-layer board of 94 × 63.8 mm with 35 parts on 68 nets, routed with 332 tracks and 2 vias.
It is built around the TMP275AID, WS2812B and SN74LVC1T45DBV. Its parts include 18 ICs, 12 capacitors, 4 resistors and 1 connector. It belongs with the interfaces and adapters and microcontroller boards boards and the ESP8266 boards of this library.
Main components
3TMP275AID
SOIC-8-40℃~+125℃ 100nA 12bit 2.7V~5.5V 220ms I2C、SMBus ±0.5℃ SOIC-8 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedSN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
README
README.mdFabAcademy_PSoC4_Breakout
A small breakout board for the PSoC 4 CY8CKIT-049 42xx prototyping kit. It includes WS2812b LEDs, a TMP275 temperature sensor, CapSense buttons and a header to attach an ESP-01 module. It was made as part Fab Academy 2015 at Fab Lab Strathclyde. You can follow the process on my class website. The content is also mirrored to my GitHub Pages site.
Note that there is one jumper wire needed if making this as a single sided board.
WARNING!
This board runs at 3.3V. You MUST modify the USB-UART board that comes with the kit or bad things will happen! The simplest option is to remove the fuse on VUSB and power everything from the board. More options are discussed on my class webpage.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | FabLibrary:C_1206_HandSoldering_IainEdit | C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 9 | WS2812b | FabLibrary:WS2812b_handsolder | U3, U4, U5, U6, U7, U8, U9, U10, U11 |
| 4 | CapSenseButton | FabLibrary:CapSenseButton | U14, U15, U16, U17 |
| 3 | 10k | FabLibrary:C_1206_HandSoldering_IainEdit | R2, R3, R4 |
| 3 | 10u | FabLibrary:C_1206_HandSoldering_IainEdit | C1, C2, C12 |
| 1 | 100 | FabLibrary:C_1206_HandSoldering_IainEdit | R1 |
| 1 | CY8CKIT-049-42xx | FabLibrary:CYKIT-49-42xx | U2 |
| 1 | ESP8266-ESP-01 | FabLibrary:ESP8266-ESP-01 | U12 |
| 1 | LP38691 | FabLibrary:LP38691_TO252_handsolder | U1 |
| 1 | SN74LVC1T45 | FabLibrary:TI-DBV-SOT23_handsolder | U13 |
| 1 | TMP275 | FabLibrary:TI-D-SO-8_handsolder | U18 |
| 1 | USB-MINI-B | FabLibrary:conn_usb_B_mini_smd | CON1 |
Similar boards
- 4 layers85 × 60 mm

- 2 layers

- 2 layers49.5 × 49.5 mm

Pcb workshop sensor
BarnabyShearer/pcb_workshop_sensor
Simple lowpower MSP and Temp sensor PCB for a PCB design workshop.
31 parts - 4 layers90 × 65 mm

KeithleyUpgrade
Na55im/keithley199-upgrade
This is an upgrade replacement for the digital control board on Keithley 199 multimeters.
85 partsGPL-3.0 - 4 layers90 × 90 mm

Sss opr3-v1 (1)
Space-and-Satellite-Systems-UC-Davis/PCBs
Collection of all the PCBs within SSS
277 parts - 2 layers107.3 × 61 mm

Master
r-map/rmap
rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc
30 parts55 - 4 layers108.6 × 87.7 mm

Blinky badge light
rowr111/blinky-badge-light
lighting badge with unique patterns and sound reactivity
123 parts9MIT - 4 layers88.7 × 49.5 mm

Questions
How big is the PSoC4 Breakout PCB?
It measures 94 × 63.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSoC4 Breakout use?
35 parts, built around the TMP275AID, WS2812B and SN74LVC1T45DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSoC4 Breakout KiCad files?
From the icchalmers/FabAcademy_PSoC4_Breakout repository on GitHub, at the commit this page was made from: the board is PSoC4_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSoC4 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask icchalmers before reusing the design.