
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

Board plug is an open-source printed circuit board by IBEXcps, from the IBEXcps/HaLiO-hw repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board with 16 parts on 25 nets, routed with 177 tracks and 0 vias.
It is built around the BC548. Its parts include 5 connectors, 4 resistors, 2 ICs, 2 diodes and 1 capacitor. It belongs with the ESP8266 boards of this library.
Use KiCad to open the project.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 120 | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | LED | LEDs:LED_0805 | D1, D2 |
| 1 | 1nF | Capacitors_THT:C_Disc_D3_P2.5 | C1 |
| 1 | 200 | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 620 | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | ACS712 | SMD_Packages:SOIC-8-N | U2 |
| 1 | BC548 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | Q1 |
| 1 | Display | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | ESP-12 | ESP8266:ESP-12 | U1 |
| 1 | G5Q-1 | Relays_THT:Relay_SANYOU_SRD_Series_Form_C | RL1 |
| 1 | PINS | Pin_Headers:Pin_Header_Straight_1x05 | P4 |
| 1 | PROGRAM | Pin_Headers:Pin_Header_Straight_2x02 | P2 |
| 1 | Screw_Terminal_1x02 | Connectors:bornier2 | J1 |
| 1 | Serial | Pin_Headers:Pin_Header_Straight_1x04 | P3 |

ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards



DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus


clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II

Danjovic/Soda-IDE
8 bit Compact Flash Interface for MSX computers

alvaroalea/all-spectrum-clones
Schematic of a 8bit computer, clone of Sinclair ZX Spectrum
16 parts, built around the BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IBEXcps/HaLiO-hw repository on GitHub, at the commit this page was made from: the board is board_plug.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).