
Day 02 Four Port USB C
i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
Template is an open-source printed circuit board by i2cjak, from the i2cjak/Framework_Expansion_Cards repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 26 × 30 mm with 6 parts on 10 nets.
It is built around the D3V3XA4B10LP. Its parts include 1 IC, 1 diode and 1 connector.
This repository contains a KiCad project template provided by American Embedded. It is designed to be a starting point for new electronic designs, pre-configured with common settings, layers, and manufacturing outputs.
Build.kicad_jobset file for generating common manufacturing data for JLCPCB, NextPCBbuild.sh script is provided to automate the process of running the jobset and formatting the component placement file.Use this repository as a template directly in KiCad.
To generate all the output files, run the provided shell script:
./build.shThis script will:
Build.kicad_jobset.build/ directory.The Build.kicad_jobset is configured to output:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | D3V3XA4B10LP | Package_DFN_QFN:Diodes_UDFN-10_1x2.5mm_P0.5mm | U1 |
| 1 | TVS | Diode_SMD:D_SOD-882 | D1 |
| 1 | USB_C_Plug_USB2.0 | Expansion_Card:USB_C_Plug_Amphenol_12401981E412A | J1 |
| 1 | ~ | amemb-Symbol:NextPCB | LOGO1 |

i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

futureshocked/kicad_latte_panda_mu
A custom carrier-board reference design for the LattePanda Mu compute module, used as a worked example in the Tech Explorations KiCad course:

Tay0710/Design_S1_006
This project integrates hardware, firmware, and design elements to develop a fully functional autonomous 3D mapping drone system.


tuankoko567/LattePanda-MU-carrier-Board
Designing high-speed carrier board using KiCad, applying differential pair routing and length matching, studying impedance control and PCB stack-up planning, learning signal integrity and EMI-aware layout techniques.

yuanyong2024/IoT-feather
a IoT evb board that based on Quectel BG95 modem and in adafruit feather form factor

caggieb/ESP32-controller-WIP
Design of an ESP32 based controller with IMU, from PCB to software


It measures 26 × 30 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the D3V3XA4B10LP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the i2cjak/Framework_Expansion_Cards repository on GitHub, at the commit this page was made from: the board is Template/Template.kicad_pcb and its schematic Day_01_Wi-Fi-HaLow/Day_01_Wi-Fi-Halow.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).