4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT
2 layers373.4 × 34.5 mm
Easy bee feather route
hydronics2/2019-easy-bee-counter59Bee-counter-easy
- Size
- 373.4 × 34.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 115
- Pads
- 594
- Tracks, vias
- 1,991, 53
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Dec 2019
- Updated
- 5 May 2024
Overview
Easy bee feather route is an open-source printed circuit board by hydronics2, from the hydronics2/2019-easy-bee-counter repository on GitHub. It is a 2-layer board of 373.4 × 34.5 mm with 145 parts on 115 nets, routed with 1,991 tracks and 53 vias.
It is built around the QRE1113. Its parts include 10 resistors, 8 capacitors, 7 ICs, 4 connectors and 2 transistors. It belongs with the microcontroller boards boards of this library.
Main components
1README
PCB_files/Kicad_v/README.mdThe GERBER files were developed from the kicad board files and there was a small error in the kiCAD files... so the gerber files have been removed. You now have to use the Eagle board files or generate gerber files from the eagle board files.... or a lot of PCB manufacturers will take eagle PCB files and you don't have to generate your own gerber files. You can still use the kicad files but you have to route a small trace for the SCK pin. See this bug report: https://github.com/hydronics2/2019-easy-bee-counter/issues/25
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | QRE1113_ | easy_bee_feather_route:DIP400W50P180L360H200Q4 | U$100, U$101, U$102, U$103, U$104, U$105, U$106, U$107, U$108, U$109, U$110, U$111, U$112, U$113, U$114, U$115 +32 |
| 31 | M06_BEE | easy_bee_feather_route:1X06_BEE | U$1, U$2, U$10, U$11, U$12, U$13, U$14, U$15, U$16, U$17, U$18, U$19, U$20, U$21, U$22, U$23 +15 |
| 24 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22, JP23, JP24 +8 |
| 6 | 0.1uF | easy_bee_feather_route:CAP-PTH-SMALL-KIT | C1, C2, C3, C4, C5, C6 |
| 6 | 74165 | easy_bee_feather_route:DIP16 | U1, U2, U3, U4, U5, U6 |
| 6 | RPACK-BUSSED-8-SIP-PTH-8 | easy_bee_feather_route:RPACK-SIP-PTH-8 | R2, R5, R6, R7, R11, R12 |
| 4 | 10k | easy_bee_feather_route:AXIAL-0.3 | R1, R3, R4, R13 |
| 4 | RPACK-BUSSED-9 | easy_bee_feather_route:RPACK-SIP-PTH-9 | U$34, U$35, U$36, U$37 |
| 3 | CONN_0138MILL | easy_bee_feather_route:1X01-40MILL | U$31, U$39, U$40 |
| 3 | CONN_025MM | easy_bee_feather_route:SCREWTERMINAL-5MM-2 | J1, J3, J4 |
| 2 | 60V/32A/35mΩ | easy_bee_feather_route:TO220V | Q6, Q7 |
| 2 | STANDOFF_ELECTRICAL5-32 | easy_bee_feather_route:STANDOFF_ELECTRICAL_5_32 | S1, S2 |
| 1 | 1uF | easy_bee_feather_route:CAP-PTH-SMALL-KIT | C7 |
| 1 | 560uF | easy_bee_feather_route:E3,5-8 | C8 |
| 1 | FEATHERWING_NODIM | easy_bee_feather_route:FEATHERWING_DIM | MS2 |
| 1 | ItsyBitsy_M0_M4 | Package_DIP:DIP-28_W15.24mm | J2 |
| 1 | JUMPER-SMT_2_NC_TRACE_SILK | easy_bee_feather_route:SMT-JUMPER_2_NC_TRACE_SILK | JP1 |
| 1 | V_REG_78XXSINK | easy_bee_feather_route:TO220-IGO | U7 |
Questions
How big is the Easy bee feather route PCB?
It measures 373.4 × 34.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Easy bee feather route use?
145 parts, built around the QRE1113. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Easy bee feather route KiCad files?
From the hydronics2/2019-easy-bee-counter repository on GitHub, at the commit this page was made from: the board is PCB_files/Kicad_v/easy_bee_feather_route.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Easy bee feather route design in my own project?
Its repository states no licence, so its author keeps all rights: ask hydronics2 before reusing the design.
Similar boards
- 2 layers136.6 × 116.9 mm
- 2 layers60 × 100 mm
- 2 layers96 × 78.3 mm
Yokozunita potencia
OPRobots/Yokozunita
Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.
45 parts2GPL-3.0 - 2 layers35.5 × 58 mm
Esguicho 2.0
project-neon/Esguicho
Neste repositório temos os principais arquivos que usamos para os 3 capítulos, Eletrônica, Mecânica e Software. Segue abaixo uma lista do que temos em cada uma das pastas:
45 parts2 - 4 layers80 × 87.6 mm
AratMicro
vorlaxen-labs/AratMicro
High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).
110 parts1MIT - 2 layers130 × 119 mm
- 2 layers163 × 75.8 mm
