
Picouart
huming2207/picouart
CH340X based UART dongle for ESP32/STM32 UART Bootloader firmware downloading

CH340X based UART dongle for ESP32/STM32 UART Bootloader firmware downloading
Panel rev5 is an open-source printed circuit board by huming2207, from the huming2207/picouart repository on GitHub. It is a 2-layer board of 94.8 × 76.2 mm with 328 parts on 152 nets, routed with 1,408 tracks and 632 vias.
It is built around the CH340X, AP7361C-33E and USBLC6-2P6, with the USBLC6-4SC6 among its other parts. Its parts include 48 capacitors, 48 resistors, 32 ICs, 16 diodes and 16 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 168 | NPTH | NPTH | KiKit_MB_10_1, KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_10_5, KiKit_MB_10_6, KiKit_MB_11_1, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_11_5, KiKit_MB_11_6, KiKit_MB_12_1, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4 +152 |
| 16 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C4, C4, C4, C4, C4, C4, C4, C5, C5, C5, C5, C5, C5, C5, C5 |
| 16 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C1, C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2, C2, C2 |
| 16 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C3, C3, C3, C3, C3, C3, C3, C6, C6, C6, C6, C6, C6, C6, C6 |
| 16 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R5, R5, R5, R5, R5, R5, R5, R6, R6, R6, R6, R6, R6, R6, R6 |
| 16 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R3, R3, R3, R3, R3, R3, R3, R4, R4, R4, R4, R4, R4, R4, R4 |
| 16 | 5.11k | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R2, R2 |
| 16 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D2, D2 |
| 8 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U2, U2, U2, U2, U2, U2, U2 |
| 8 | CH340X | Package_SO:MSOP-10_3x3mm_P0.5mm | U1, U1, U1, U1, U1, U1, U1, U1 |
| 8 | UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J2, J2, J2, J2, J2, J2, J2 |
| 8 | USB | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J1, J1, J1, J1, J1, J1, J1 |
| 8 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U3, U3, U3, U3, U3, U3, U3, U3 |
| 8 | USBLC6-4SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4, U4, U4, U4, U4, U4, U4, U4 |

huming2207/picouart
CH340X based UART dongle for ESP32/STM32 UART Bootloader firmware downloading

spassigl/ATMega32A-demo-board
An ATMega32A breakout board with exposed GPIO pins, LEDs, tactile switches and a buzzer



Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

apfaudio/sandflat
Lower-cost DSP experimentation host for the SoldierCrab ECP5 SoM

baden/dc-motor-driver-adapter
Плата для підключення польотного контролера до драйвера DC-двигуна. PPM в аналог 5..0В.

Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

Kofen/PoE_Ethernet_GPIB_Adapter
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
It measures 94.8 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
328 parts, built around the CH340X, AP7361C-33E, USBLC6-2P6 and USBLC6-4SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the huming2207/picouart repository on GitHub, at the commit this page was made from: the board is panel-rev5.kicad_pcb and its schematic picouart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask huming2207 before reusing the design.