2 layers35.6 × 66.5 mm
2 layers39.3 × 36.5 mm
Hackademy
hulkco/Varios2Varios
- Size
- 39.3 × 36.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 11
- Pads
- 40
- Tracks, vias
- 48, 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 12 Feb 2022
Overview
Hackademy is an open-source printed circuit board by hulkco, from the hulkco/Varios repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 39.3 × 36.5 mm with 16 parts on 11 nets, routed with 48 tracks and 5 vias.
It is built around the ATTINY85-20SU. Its parts include 6 diodes, 3 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdVarios
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED_Small_ALT | Hackademy:LED_0805 | D1, D2, D3, D4, D5, D6 |
| 3 | 22 ohms | Hackademy:R_0805 | R1, R2, R3 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | Battery | Hackademy:S8211R | BT1 |
| 1 | C_Small | Hackademy:C_0805 | C1 |
| 1 | Conn_02x03_Odd_Even | Hackademy:PogoPinSocket_2x03_P2.54mm | J1 |
| 1 | Edge.Cuts | Hackademy:Hackademy_01 | Ref1 |
| 1 | PinPad | Hackademy:Pin_Pad_D5.0mm | Ref2 |
| 1 | SW_Push | Hackademy:SW_SPST_B3U-1000P | SW1 |
More from hulkco/Varios
12- 2 layers38.6 × 69.5 mm
- 16 layers88.3 × 64.5 mm
- 2 layers43.6 × 41.1 mm
- 2 layers108 × 67.2 mm
- 2 layers35.6 × 66.5 mm
- 2 layers50 × 50 mm
- 2 layers
- 2 layers68.6 × 53.3 mm
- 2 layers24 × 22 mm
- 2 layers85.7 × 92.7 mm
- 2 layers40.6 × 38.1 mm
Similar boards
- 2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28
Questions
How big is the Hackademy PCB?
It measures 39.3 × 36.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hackademy use?
16 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hackademy KiCad files?
From the hulkco/Varios repository on GitHub, at the commit this page was made from: the board is Hackademy_Badge/Hackademy/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hackademy design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).