Skip to the content
2 layers20.3 × 17.8 mmAttiny85 Breakout, the printed circuit board in 3D

Attiny85 Breakout

hulkco/Varios2

Varios

Size
20.3 × 17.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
10
Pads
26
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
7 Dec 2018
Updated
12 Feb 2022

Overview

Attiny85 Breakout is an open-source printed circuit board by hulkco, from the hulkco/Varios repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 20.3 × 17.8 mm with 9 parts on 10 nets.

It is built around the ATTINY85-20SU. Its parts include 2 resistors, 2 diodes, 2 connectors, 1 capacitor and 1 IC. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Varios

Parts

9
QtyValueFootprintReferences
21KAttiny85_Breakout:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1, R2
2Conn_01x04Attiny85_Breakout:PinHeader_1x04_P2.54mm_VerticalJ1, J2
10.1uFCapacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolderC1
1ATTINY85-20SUAttiny85_Breakout:SOT127P798X216-8NIC1
1LEDAttiny85_Breakout:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD2
1POWERAttiny85_Breakout:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
1Val**Attiny85_Breakout:Breakout_Attiny85_01Ref**

More from hulkco/Varios

12
  • 2 layers43.6 × 41.1 mmMouse.001, the printed circuit board in 3D

    Mouse.001

    hulkco/Varios

    Varios

    76 parts2GPL-3.0
  • 2 layers35.6 × 66.5 mmVcuts, the printed circuit board in 3D

    Vcuts

    hulkco/Varios

    Varios

    48 parts2GPL-3.0
  • 2 layers24 × 22 mmSerpente, the printed circuit board in 3D

    Serpente

    hulkco/Varios

    Varios

    31 parts2GPL-3.0
  • 2 layers85.7 × 92.7 mmHG 002, the printed circuit board in 3D

    HG 002

    hulkco/Varios

    Varios

    30 parts2GPL-3.0
  • 2 layers40.6 × 38.1 mmPanel.001, the printed circuit board in 3D

    Panel.001

    hulkco/Varios

    Varios

    28 parts2GPL-3.0

Similar boards

  • 2 layers65 × 56.5 mmSuperPower RPi KiCAD, the printed circuit board in 3D

    SuperPower RPi KiCAD

    SensorsIot/SuperPower

    Here you should find the best power supplies for your low-power projects

    122 parts600
  • 2 layers18.8 × 8.1 mmDell charger emulator, the printed circuit board in 3D

    Dell charger emulator

    KivApple/dell-charger-emulator

    Emulator of original Dell charger using ATTINY85

    6 parts154
  • 2 layers14 × 17.3 mmSnopf, the printed circuit board in 3D

    Snopf

    snopf/snopf

    snopf USB password token

    18 parts145GPL-2.0
  • 2 layers43.9 × 29 mmC64Saver2-addon, the printed circuit board in 3D

    C64Saver2-addon

    bwack/C64-Saver-bwack

    C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.

    43 parts124
  • 2 layers61 × 36.8 mmKeebcard, the printed circuit board in 3D

    Keebcard

    rsheldiii/Keebcard

    Home of the KeebCard project - Kicad files, code, and more!

    15 parts112
  • 2 layers200 × 100 mmRegalodilara, the printed circuit board in 3D

    Regalodilara

    valerionew/very-good-uc-doggos

    A special graduation present for a special friend. Six microcontrollers in one devboard

    91 parts50
  • 2 layers134.3 × 140 mmAerospace badge, the printed circuit board in 3D

    Aerospace badge

    AerospaceVillage/avBadge_2020

    Aerospace Village Badge 2020

    20 parts28
  • 2 layers50 × 25 mmLoRa Environmental Sensors, the printed circuit board in 3D

    LoRa Environmental Sensors

    spielhuus/LoRa-Environmental-Sensors

    ATtiny85 based LoRa atmospheric sensor board with BME280

    5 parts28

Questions

How big is the Attiny85 Breakout PCB?

It measures 20.3 × 17.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Attiny85 Breakout use?

9 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Attiny85 Breakout KiCad files?

From the hulkco/Varios repository on GitHub, at the commit this page was made from: the board is Attiny85_Breakout/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Attiny85 Breakout design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).