

Wm8816x4
8-channel volume controller based on WM8816
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 169
- Nets
- 110
- Pads
- 545
- Tracks, vias
- 1,435, 514
- Pours
- 766
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Feb 2026
- Updated
- 7 Feb 2026
Overview
Wm8816x4 is an open-source printed circuit board by hrandib, from the hrandib/wm8816-pcb repository on GitHub. It is a 2-layer board of 100 × 100 mm with 169 parts on 110 nets, routed with 1,435 tracks and 514 vias.
It is built around the STM8S003F3P6, OPA2134UA and TPS7A3901DSC, with the TPS7A4901DGN, TXS0108EPW and BSS138 among its other parts. Its parts include 67 capacitors, 35 resistors, 16 connectors, 15 ICs and 1 transistor. It belongs with the ESP32, RISC-V and STM8 boards of this library.
Main components
6STM8S003F3P6
TSSOP-20-40℃~+85℃ 10bit 128Byte 16 16MHz 1KB 2.95V~5.5V 8 Bit 8KB Built-in FLASH STM8 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)OPA2134UA
SOIC-8-18V~-2.5V、2.5V~18V -40℃~+85℃ 100dB 2 20V/us 2uV/℃ 35mA 500uV 50pA 5mA 5pA 8MHz 8nV/√Hz@1kHz Built-in compensation SOIC-8 Operational Amplifier ROHSTexas InstrumentsAudio AmplifiersTPS7A3901DSC
SON10Dual, 150mA, Wide VIN Positive and Negative LDO Voltage RegulatorTexas InstrumentsUncategorisedTPS7A4901DGN
TSSOP8+36V, +150mA, Ultralow-Noise, Positive Linear RegulatorTexas InstrumentsUncategorisedTXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
169| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R15, R16, R17, R19, R21, R22, R23, R25, R27, R28, R29, R31, R33, R34, R35 |
| 16 | 2.2u | Capacitor_THT:C_Rect_L9.0mm_W8.5mm_P7.50mm_MKT | C24, C25, C26, C27, C35, C36, C37, C38, C46, C47, C48, C49, C57, C58, C59, C60 |
| 16 | 220n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C28, C31, C32, C33, C39, C42, C43, C44, C50, C53, C54, C55, C61, C64, C65, C66 |
| 12 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2, C3, C6, C7, C8, C9, C12, C13, C15, C16, C19, C20 |
| 8 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29, C34, C40, C45, C51, C56, C62, C67 |
| 8 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R18, R20, R24, R26, R30, R32 |
| 8 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R6, R8, R9 |
| 5 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C5, C11, C17, C21 |
| 4 | +5_PAD | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2, TP7, TP12, TP17 |
| 4 | +9_PAD | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP6, TP11, TP16 |
| 4 | -9_PAD | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP5, TP10, TP15, TP20 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C30, C41, C52, C63 |
| 4 | GNDA_PAD | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP3, TP8, TP13, TP18 |
| 4 | GNDD_PAD | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP4, TP9, TP14, TP19 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | OPA2134 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U10, U12, U14 |
| 4 | WM8816 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U9, U11, U13, U15 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C22, C23 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C14 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C18 |
| 2 | 62k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | AUX_DATA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | AUX_PWR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | CH2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | CH3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | CH4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | CH_ALL | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J16 |
| 1 | CH_OUT1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | CH_OUT2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | CH_OUT3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | CH_OUT4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | CH_OUT_ALL | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J15 |
| 1 | DISP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ESP32C3-SUPERMINI | Footprints:ESP32C3_SuperMini_SMT | U7 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | LOGO | Footprints:logo | G*** |
| 1 | MP2315_DCDC | Footprints:MP2315_MOD | U6 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PWR_IN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | STM8S003F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SWIM | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TPS7A3901 | Package_SON:Texas_S-PVSON-N10_ThermalVias | U1 |
| 1 | TPS7A4901 | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm_ThermalVias | U4 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
Similar boards
- 4 layers50 × 80 mm

- 2 layers60 × 32 mm

- 2 layers54 × 54 mm

Traktor
polish-software/tractor-lighting
Tractor toy lighting project (PCB and STM8 software).
73 parts - 2 layers39 × 39 mm

- 4 layers64 × 64 mm

Convey
kennito2035/convey
CONVEY: open 8-channel patient-isolated EEG/sEMG/ECG acquisition board (ADS1299, KiCad 10)
146 parts4CERN-OHL-S-2.0 - 4 layers49.8 × 49.8 mm

- 4 layers60 × 46 mm

AFE v1
auselia/afe_pcb
The first acoustic emission (AE) front-end board of Auselia. It turns the charge of a piezoelectric sensor into 14-bit samples and a wake-up signal.
167 parts - 4 layers160 × 100 mm

Questions
How big is the Wm8816x4 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wm8816x4 use?
169 parts, built around the STM8S003F3P6, OPA2134UA, TPS7A3901DSC and TPS7A4901DGN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wm8816x4 KiCad files?
From the hrandib/wm8816-pcb repository on GitHub, at the commit this page was made from: the board is wm8816x4.kicad_pcb and its schematic wm8816_single.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wm8816x4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hrandib before reusing the design.