

Env sens
The electronics system for Typhoon Streamliner
- Size
- 60 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 58
- Pads
- 208
- Tracks, vias
- 292, 43
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 May 2024
- Updated
- 18 Oct 2024
Overview
Env sens is an open-source printed circuit board by hpvdt, from the hpvdt/typhoon_electronics repository on GitHub. It is a 2-layer board of 60 × 60 mm with 40 parts on 58 nets, routed with 292 tracks and 43 vias.
It is built around the ESP32-S3-WROOM-1-N8, TPD1E05U06DYAR and TPD2EUSB30ADRT, with the NUP2105L, TLV76133DCY and TLV76150DCY among its other parts. Its parts include 11 capacitors, 10 resistors, 5 ICs, 4 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTPD1E05U06DYAR
SOT-5X3-40℃~+125℃ 0.42pF 1 10V 10nA 2.5A@8/20us 40W@8/20us 5.5V 8.5V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS Unidirectional SOT-5X3 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)TPD2EUSB30ADRT
SOT(9x3)-40℃~+85℃ 0.7pF 2 3.6V 4.5V 45W@8/20us 5A@8/20us 8V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT(9x3) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)NUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)TLV76133DCY
SOT-223-40℃~+125℃ 1 1.6V@(1A) 16V 1A 3.3V 60dB@(1kHz) 60uA 60uVrms Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTLV76150DCY
SOT-223-40℃~+125℃@(Tj) 1 1.6V@(1A) 16V 1A 5V 60uVrms 65uA 70dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Input under-voltage protection、Built-in soft-start Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdTyphoon Electronics
The electronics system for Typhoon Streamliner
Organization
There is a folder for each subsystem. Within each subsystem folder are hardware and firmware folders. Put hardware related files into the hardware folder, firmware in the firmware folder. Other folders can be added as needed: for example a media folder is handy for storing pictures related to a project which can be used in documentation.
Conventions
Partly for consistency, partly for functionality; please follow the following conventions:
- Try to keep folder names to single words and all lowercase
- Use underscores to separate words in names (e.g.
board_rev1). DO NOT USE SPACES! ESPECIALLY FOR FOLDERS CONTAINING CODE! Spaces in file paths may cause issues in compilers and such so best to avoid them entirely.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9, C10 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5 |
| 2 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 5.11k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 60 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 4.7n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | 40 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | BATTERY | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J2 |
| 1 | BOOT | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | CAN_BUS | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | CO2_Conn | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | HDC1080 | Package_SON:Texas_PWSON-N6 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TCAN1043xDxQ1 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | TLV76133DCY | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | 3V3_Reg1 |
| 1 | TLV76150DCY | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | 5V_Reg1 |
| 1 | TPD1E05U06DYA | Diode_SMD:D_SOD-523 | U6 |
| 1 | TPD2EUSB30A | Package_TO_SOT_SMD:Texas_DRT-3 | U7 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J3 |
More from hpvdt/typhoon_electronics
5- 2 layers65 × 56 mm

- 2 layers34.6 × 35.6 mm

- 2 layers36.5 × 26 mm

Typhoon telemetry transmitter
hpvdt/typhoon_electronics
The electronics system for Typhoon Streamliner
20 parts - 2 layers32.8 × 58.2 mm

- 2 layers

Typhoon Motherboard KiCad
hpvdt/typhoon_electronics
The electronics system for Typhoon Streamliner
6 parts
Similar boards
- 4 layers100 × 50 mm

- 2 layers75 × 55 mm

Rectifier
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
80 parts1 - 2 layers496.5 × 215.3 mm

- 2 layers40 × 57 mm

- 2 layers69 × 69 mm

Cooling Pump Board
byui-formula-hybrid/legacy-Cooling-Pump-Board
BYUI Cooling pump CAN control board
37 parts - 2 layers100.7 × 138.5 mm

- 6 layers54.3 × 22 mm

Melty
mikewen2024/Eyeliner
A 1lb (antweight) melty-brain combat robot. A melty-brain spins the entire chassis at 1,000–2,000 RPM while pulsing drive motors 100 times/second to achieve controlled translational movement — maximum hitting power, and…
39 parts1MIT - 2 layers105 × 42.8 mm

PIPO JAMON
AgustinPrietoValdez/competition-robots
Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.
33 partsMIT
Questions
How big is the Env sens PCB?
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Env sens use?
40 parts, built around the ESP32-S3-WROOM-1-N8, TPD1E05U06DYAR, TPD2EUSB30ADRT and NUP2105L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Env sens KiCad files?
From the hpvdt/typhoon_electronics repository on GitHub, at the commit this page was made from: the board is environmentals/hardware/env_sens_Kicad/env_sens.kicad_pcb and its schematic environmentals/hardware/env_sens_Kicad/env_sens.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Env sens design in my own project?
Its repository states no licence, so its author keeps all rights: ask hpvdt before reusing the design.