
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU

CAT4238 Unit is an open-source printed circuit board by hornet0018, from the hornet0018/CAT4238_Unit repository on GitHub, published under the AGPL-3.0 licence. It is a 6-layer board of 40 × 40 mm with 21 parts on 37 nets, routed with 34 tracks and 0 vias.
It is built around the CAT4238TD-GT3 and SS54. Its parts include 6 connectors, 3 resistors, 2 capacitors, 2 diodes and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | B04B-PASK-1-LFSN | SamacSys_Parts:B04BPASK1LFSN | J1, J2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5, J6 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 15Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 200kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 47uH | Inductor_THT:L_Axial_L14.5mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC | L1 |
| 1 | CAT4238TD-GT3 | SamacSys_Parts:SOT95P280X100-5N | IC1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LOGO | footprint:ConnectCube_IO_02_v2 | G*** |
| 1 | LOGO | footprint:ConnectCube_IO_01 | G*** |
| 1 | SS54 | SamacSys_Parts:DIOM5026X262N | D2 |

rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU

henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.

AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield


Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…

OpenServoCore/open-servo-core
The goal of this project is to create an open servo controller board and firmware.
![[DFR1142]Lite Carrier for LattePanda Mu, the printed circuit board in 3D](/embed/boards/LtBrain/MuBook.jpg?size=s&soon)
LtBrain/MuBook
A x86 carrier board for the LattePanda Mu

jniebuhr/roborock-pcb
This repository contains a custom PCB for use with the awesome work at Roborock CPAP. The PCB shields the controller board from any back flow that might occur from the brushless controller.
It measures 40 × 40 mm and has 6 copper layers, 1.6 mm thick.
21 parts, built around the CAT4238TD-GT3 and SS54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hornet0018/CAT4238_Unit repository on GitHub, at the commit this page was made from: the board is CAT4238_Unit/CAT4238_Unit.kicad_pcb and its schematic CAT4238_Unit/CAT4238_Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).