

Tiltetcher
Project for builind a swinging etching tank with automated temperature regulation
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 39
- Pads
- 66
- Tracks, vias
- 6, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Jul 2022
- Updated
- 11 Sep 2022
Overview
Tiltetcher is an open-source printed circuit board by hitimr, from the hitimr/Tiltetcher repository on GitHub. It is a 2-layer board with 17 parts on 39 nets, routed with 6 tracks and 0 vias.
It is built around the ARDUINO UNO R3, IRF3205 and IRF640. Its parts include 9 resistors, 3 connectors, 2 transistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3README
README.mdTiltetcher
Project for builind a swinging etching tank with automated temperature regulation
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R2, R3, R3 |
| 3 | R220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7 |
| 2 | 3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R1 |
| 1 | 12V_Terminal | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | IRF640 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | KTY10 | Package_TO_SOT_THT:SOD-70_P2.54mm | TH1 |
| 1 | Peltier_Terminal | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Sensor_Terminal | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
Similar boards
- 2 layers293.1 × 125.3 mm

- 2 layers

- 2 layers77.7 × 73.2 mm

BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0 - 2 layers50.2 × 73 mm

- 2 layers98.8 × 55.1 mm

H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers90 × 44 mm

- 2 layers80 × 100 mm

- 4 layers104.1 × 132.6 mm

Questions
What parts does the Tiltetcher use?
17 parts, built around the ARDUINO UNO R3, IRF3205 and IRF640. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiltetcher KiCad files?
From the hitimr/Tiltetcher repository on GitHub, at the commit this page was made from: the board is pcb/tiltetcher/tiltetcher.kicad_pcb and its schematic pcb/tiltetcher/tiltetcher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiltetcher design in my own project?
Its repository states no licence, so its author keeps all rights: ask hitimr before reusing the design.