2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT
2 layers86 × 64 mm
Pad controller
Highlander-Space-Program/pad-controller-pcbPCB for the static fire test stand
- Size
- 86 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 59
- Pads
- 227
- Tracks, vias
- 154, 63
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Dec 2023
- Updated
- 5 Jan 2024
Overview
Pad controller is an open-source printed circuit board by Highlander-Space-Program, from the Highlander-Space-Program/pad-controller-pcb repository on GitHub. It is a 2-layer board of 86 × 64 mm with 51 parts on 59 nets, routed with 154 tracks and 63 vias.
It is built around the TPS56121DQP and FQP30N06L. Its parts include 22 capacitors, 8 resistors, 3 ICs, 2 connectors and 1 transistor.
Main components
2README
README.mdPad controller PCB
This PCB will be located on our static fire test stand. It will be responsibe for controlling the ignition and fuel systems.
Make sure to clone submodules when cloning this repository.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100 uF | Capacitor_SMD:C_1210_3225Metric | C8, C9, C10, C19, C20 |
| 4 | 22 uF | Capacitor_SMD:C_1210_3225Metric | C22, C23, C24, C25 |
| 4 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2, M3, M4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 1.0 uF | Capacitor_SMD:C_0805_2012Metric | C2, C11, C21 |
| 2 | 100 nF | Capacitor_SMD:C_0805_2012Metric | C4, C14 |
| 1 | 1.0 Ω | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 1.2 pF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 1.78 kΩ | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 100 pF | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 1000 pF | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 150 nH | Inductor_SMD:L_Sumida_CDMC6D28_7.25x6.5mm | L1 |
| 1 | 2.26 kΩ | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 20.5 kΩ | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 33 nF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 390 kΩ | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7 uF | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 47 pF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 49.9 Ω | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 5.1 Ω | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 5100 Ω | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 56 pF | Capacitor_SMD:C_0805_2012Metric | C15 |
| 1 | Adafruit_Feather_Generic | Marks_Footprints:Adafruit_Feather | A1 |
| 1 | Boot Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Conn_01x02 | Connector_Wire:SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm | J4 |
| 1 | FQP30N06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LOGO | Logo Footprint Library:hsp-logo | G*** |
| 1 | SW_Push_Dual | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TPS56121 | Marks_Footprints:DFN-22-1EP_5x6mm_P0.5mm_EP3.14x4.3mm | U2 |
| 1 | Wago Terminal Block | Marks_Footprints:WAGO_2601-1106_lever_terminal_block | J6 |
| 1 | XBee | Marks_Footprints:XBee-PRO 900HP | U1 |
| 1 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | ~ | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | B1 |
Questions
How big is the Pad controller PCB?
It measures 86 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pad controller use?
51 parts, built around the TPS56121DQP and FQP30N06L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pad controller KiCad files?
From the Highlander-Space-Program/pad-controller-pcb repository on GitHub, at the commit this page was made from: the board is pad-controller.kicad_pcb and its schematic Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pad controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Highlander-Space-Program before reusing the design.
Similar boards
- 2 layers76.2 × 48.9 mm
Epaper clock
mattwach/epaper_clock
Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, humidity).
14 parts48Apache-2.0 - 2 layers134 × 91 mm
- 2 layers98 × 83.8 mm
Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers84 × 134.5 mm
- 2 layers58.4 × 74.7 mm
Placa manutencao preventiva
phfbertoleti/placa_monitoramento_lorawan
Placa - Monitoramento LoRaWAN
23 parts4MIT - 2 layers152.4 × 63.7 mm
Cut down control board
dwkennedy/ballooning
Mutli-function balloon related project (variometer, balloon cut-down, let down reel, tracking)
52 parts2GPL-3.0 - 2 layers106 × 53.3 mm
