

a custom stm32 pcb design
- Size
- 45 × 36 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 51
- Pads
- 138
- Tracks, vias
- 261, 65
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Mar 2025
- Updated
- 3 Mar 2025
Overview
Stm32 is an open-source printed circuit board by heyitsmeyo, from the heyitsmeyo/stm32custom-pcb- repository on GitHub. It is a 4-layer board of 45 × 36 mm with 32 parts on 51 nets, routed with 261 tracks and 65 vias.
It is built around the AMS1117-3.3. Its parts include 13 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.
Main components
1README
README.mdstm32custom-pcb-
a custom stm32 pcb design
if you like the project , you can donate us for more :
https://ko-fi.com/heyitsmeyoParts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nf | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4 |
| 4 | 1k5 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 10pf | Capacitor_SMD:C_0805_2012Metric | C10, C11 |
| 2 | 1uf | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 2 | 22uf | Capacitor_SMD:C_0805_2012Metric | C12, C13 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10nf | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10uf | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RED LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Stm32 PCB?
It measures 45 × 36 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Stm32 use?
32 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32 KiCad files?
From the heyitsmeyo/stm32custom-pcb- repository on GitHub, at the commit this page was made from: the board is stm32/stm32/stm32.kicad_pcb and its schematic stm32/stm32/stm32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask heyitsmeyo before reusing the design.