
Arduino board pcb
marrynrv/Custom-Arduiono-Board
Custom Arduino-compatible microcontroller development board designed in KiCad based on the classic Uno reference schematic

a custom arduino uno rev3 pcb design
Arduino is an open-source printed circuit board by heyitsmeyo, from the heyitsmeyo/arduinounorev3-pcb- repository on GitHub. It is a 2-layer board of 88.4 × 67.3 mm with 52 parts on 74 nets, routed with 415 tracks and 137 vias.
It is built around the ATMEGA16U2-AU, ATMEGA328PB-AU and LMV358, with the LP2985-33DBV among its other parts. Its parts include 14 capacitors, 14 resistors, 6 diodes, 5 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
a custom arduino uno rev3 pcb design
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C7, C8, C9, C10, C15 |
| 6 | 1K | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11, R14 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R6, R12, R13 |
| 4 | 22p | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6 |
| 3 | D_Schottky | Diode_SMD:D_1206_3216Metric | D1, D2, D6 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5 |
| 2 | 16Mhz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1, Y2 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | 1uf | Capacitor_SMD:C_0603_1608Metric | C2, C11 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 47uf | Capacitor_SMD:CP_Elec_6.3x5.8 | C12, C13 |
| 2 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2, J3 |
| 2 | Polyfuse | Resistor_SMD:R_0603_1608Metric | F1, F2 |
| 1 | 12uH | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | ATmega16U2-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | ATmega328PB-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J4 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | LMV358 | Library:VSSOP-8_3.0x3.0mm_P0.65mm | U3 |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | Thermistor_PTC | Resistor_SMD:R_1812_4532Metric | TH1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

marrynrv/Custom-Arduiono-Board
Custom Arduino-compatible microcontroller development board designed in KiCad based on the classic Uno reference schematic

olexsu/ATmega328_control_Board
Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.


daviddzekwer/Arduino-Uno-R3-PCB-Design
This project is a replica of the official Arduino Uno R3 designed using KiCad 10 as part of an Electrical and Electronics Engineering PCB Design assignment.

harichandanrajiv-lab/AG328X-REV-1
AG328X REV-1 is a compact, redesigned implementation of the Arduino UNO platform,. The project focuses on improving the original UNO architecture through a significantly reduced PCB footprint, enhanced power…



It measures 88.4 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the ATMEGA16U2-AU, ATMEGA328PB-AU, LMV358 and LP2985-33DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the heyitsmeyo/arduinounorev3-pcb- repository on GitHub, at the commit this page was made from: the board is arduino uno/arduino/arduino.kicad_pcb and its schematic arduino uno/arduino/arduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask heyitsmeyo before reusing the design.