Skip to the content
2 layers39.9 × 30.6 mmPWR Control, the printed circuit board in 3D
Size
39.9 × 30.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
56
Nets
30
Pads
121
Tracks, vias
180, 0
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Jan 2022
Updated
22 Sep 2026

Overview

PWR Control is an open-source printed circuit board by Heorenmaru, from the Heorenmaru/Hardware repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 39.9 × 30.6 mm with 56 parts on 30 nets, routed with 180 tracks and 0 vias.

It is built around the MT3608, MAX40200AUK and AO3400A, with the AO3401A among its other parts. Its parts include 22 resistors, 7 diodes, 6 capacitors, 5 ICs and 4 transistors.

Main components

4

README

README.md

Hardware

Parts

56
QtyValueFootprintReferences
19RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R3, R4, R5, R6, R10, R11, R12, R13, R14, R17, R18, R19, R20, R21, R22 +3
6CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C5, C6
4DDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D2, D3, D5
2AO3400APackage_TO_SOT_SMD:SOT-23Q1, Q5
2AO3401APackage_TO_SOT_SMD:SOT-23Q2, Q4
2GNDiTestPoint:TestPoint_Pad_1.5x1.5mmTP6, TP6
2LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD6, D7
2MCP6001-OTPackage_TO_SOT_SMD:SOT-23-5U1, U3
2RResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR15, R16
10R5Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2
15V_DCTestPoint:TestPoint_Pad_D1.5mmTP8
1CONTROLTestPoint:TestPoint_Pad_D1.0mmTP1
1CURTestPoint:TestPoint_Pad_D1.0mmTP2
1DDiode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolderD4
1ENTestPoint:TestPoint_Pad_D1.0mmE1
1FBTestPoint:TestPoint_Pad_D1.0mmFB1
1GNDoTestPoint:TestPoint_Pad_1.5x1.5mmTP7
1LInductor_SMD:L_10.4x10.4_H4.8L1
1MAX40200AUKPackage_TO_SOT_SMD:SOT-23-5U2
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U5
1MT3608Package_TO_SOT_SMD:SOT-23-6U4
1PWRTestPoint:TestPoint_Pad_D1.0mmTP3
1USBTestPoint:TestPoint_Pad_D1.5mmTP4
1VBATTestPoint:TestPoint_Pad_D1.5mmTP5

More from Heorenmaru/Hardware

4
  • 2 layers30.4 × 25.2 mmStm32Board, the printed circuit board in 3D

    Stm32Board

    Heorenmaru/Hardware

    69 parts1CC-BY-SA-4.0
  • 2 layers26.7 × 11.7 mmPowerSW, the printed circuit board in 3D

    PowerSW

    Heorenmaru/Hardware

    32 parts1CC-BY-SA-4.0
  • 2 layers17.7 × 19.6 mmMT3608, the printed circuit board in 3D

    MT3608

    Heorenmaru/Hardware

    16 parts1CC-BY-SA-4.0

Similar boards

  • 2 layers80 × 25 mmLedGateController, the printed circuit board in 3D

    LedGateController

    Knifa/ws28xx-led-driver

    A straightforward DIY WS28xx LED driver.

    73 parts3
  • 4 layers90 × 95 mmWiegand bridge, the printed circuit board in 3D

    Wiegand bridge

    EdgeCoil/wiegand-bridge

    ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.

    197 parts1
  • 2 layers150 × 40 mmBicopter, the printed circuit board in 3D

    Bicopter

    InputBlackBoxOutput/Bicopter

    Design files for a PCB Bicopter

    79 parts1MIT
  • 2 layers100 × 73.9 mmSecurity Alarm Panel, the printed circuit board in 3D

    Security Alarm Panel

    Matyas604/Security-Alarm-Panel

    Home Assistant Smart Home Alarm Control Panel with fingerprint reader, NFC/RFID card reader, motion radar, and touchscreen TFT display. It can control your smart home, not just your home security system.

    132 parts1GPL-3.0
  • 2 layers109.7 × 95.3 mmBetter pelarboj, the printed circuit board in 3D

    Better pelarboj

    obobed/flytboj

    (in the real assembled version, the components should be facing down to allow space for the actual original LED board, but here it's the wrong side up in order to showcase the PCB so you can see more than just a blank…

    65 partsGPL-3.0
  • 2 layers94.9 × 69 mmECU, the printed circuit board in 3D

    ECU

    rivotmotors-rnd/ECU_Firmware_V3

    RIVOT ECU V3.0 Repo containing STM32F446RE firmware and KiCad PCB hardware designs.

    115 parts
  • 2 layers50 × 50 mmPCB DRONE, the printed circuit board in 3D

    PCB DRONE

    shreejita56/XiZi-PCB-DRONE

    So I made a custom PCB based on Esp32 . It holds an IMU and a Barometer for control . It has a normal 4 Motor Layout 2 motors will move clock wise and 2 will be anti-clock wise direction.

    68 parts
  • 2 layers82.6 × 94.6 mmCharging circuit, the printed circuit board in 3D

    Charging circuit

    vacuumsens/pcb

    KiCad PCB design projects for VacuumSens.

    270 parts

Questions

How big is the PWR Control PCB?

It measures 39.9 × 30.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PWR Control use?

56 parts, built around the MT3608, MAX40200AUK, AO3400A and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PWR Control KiCad files?

From the Heorenmaru/Hardware repository on GitHub, at the commit this page was made from: the board is VRTrackerPOWER/PWR_Control/PWR_Control.kicad_pcb and its schematic Geiger/geiger/geiger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PWR Control design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).