

Colossus TI rev A
- Size
- 70 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 32
- Pads
- 157
- Tracks, vias
- 197, 40
- Pours
- 78
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Nov 2024
- Updated
- 12 Aug 2025
Overview
Colossus TI rev A is an open-source printed circuit board by henryclaessonVT, from the henryclaessonVT/darpa-sense-hardware repository on GitHub. It is a 4-layer board of 70 × 70 mm with 50 parts on 32 nets, routed with 197 tracks and 40 vias.
It is built around the AP63203WU and DMP510DLQ. Its parts include 14 capacitors, 7 resistors, 5 connectors, 4 ICs and 2 diodes.
Main components
2AP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersDMP510DLQ
SOT-23-3-55℃~+150℃ 1 P-Channel 196mA 40pF 500pC@10V 50V 520mW 9.5Ω@5V SOT-23-3 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint_Loop_D2.50mm_Drill1.0mm | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | Charge Amp Out, Example, FMout, MFCin, Temp Read |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C6, C8, C11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C2, C12 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C4, C10 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | LED | Diode_SMD:D_0805_2012Metric | D1, D2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | TH1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 125p | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 250M | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 3.9u | Inductor_SMD:L_1812_4532Metric | L1 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | AD9833xRM | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | Analog Debugging | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | CFPS-72- 24MHz | Oscillator:Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm | Y1 |
| 1 | DMP510DL | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Digital Testing Pins | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | External Power In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | LOGO | DreamsLabLogo:dreamslogo | G*** |
| 1 | LOGO | Graphics:magnifier | G*** |
| 1 | MCP6L01Rx-xOT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MFC Connection Points | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Reset | Button - B3F_1000:SW_B3F-1000_OMR | SW2 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_SPDT | CS12ANW03 - Switch:CS12ANW03_NKK | SW1 |
| 1 | XMSM0C1104SDYYR | MSPM0C110:SOT-23-THIN16_DYY_TEX | U1 |
More from henryclaessonVT/darpa-sense-hardware
4- 2 layers23.9 × 40 mm

- 4 layers45.3 × 35.2 mm

- 2 layers8.3 × 26.3 mm

- 2 layers72 × 57.8 mm

Similar boards
- 2 layers39.1 × 34.5 mm

- 4 layers37.1 × 37.2 mm

Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0 - 4 layers81.6 × 88.8 mm

Cheetah MX4-Mini
KaiPereira/Cheetah-MX4-Mini
A powerful yet compact 3D printer motherboard that supports TMC stepsticks, fans, heaters, screens and thermistors
171 parts179 - 6 layers84 × 98 mm

FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers50 × 70 mm

- 2 layers30 × 49.3 mm

USB PD monitor V1
lhm0/pd_logger
This repository contains two DIY gadgets to monitor and log USB-C Power Delivery (PD). Both devices are designed to be easy to build, hackable, and useful for makers who want to explore USB-C PD.
34 parts82 - 4 layers55 × 100.5 mm

OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72 - 2 layers24 × 38 mm

BSH Board
Bouni/BSH-Board
A board that interfaces the DBUS of several home appliances and brings them into Home-Assitant via ESPHome
75 parts65
Questions
How big is the Colossus TI rev A PCB?
It measures 70 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Colossus TI rev A use?
50 parts, built around the AP63203WU and DMP510DLQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Colossus TI rev A KiCad files?
From the henryclaessonVT/darpa-sense-hardware repository on GitHub, at the commit this page was made from: the board is Colossus/Colossus_TI_rev_A/Colossus_TI_rev_A.kicad_pcb and its schematic Colossus/Colossus_TI_rev_A/Colossus_TI_rev_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Colossus TI rev A design in my own project?
Its repository states no licence, so its author keeps all rights: ask henryclaessonVT before reusing the design.