2 layers51 × 60.7 mm
Mbc3flash
HDR/MBC3-Flashcart
My own version of RetroReboot's MBC3 flashcart https://www.retroreboot.net/HTML/projectpage.html, please consider supporting him if you can https://www.paypal.com/paypalme/WadeVillines
27 parts88
2 layers51 × 70 mm
MAC GBD Flashcart
HDR/Gameboy-Camera-Flashcart136Available on PCBWay!
- Size
- 51 × 70 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 26
- Nets
- 84
- Pads
- 303
- Tracks, vias
- 1,039, 77
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Aug 2020
- Updated
- 23 Dec 2023
Overview
MAC GBD Flashcart is an open-source printed circuit board by HDR, from the HDR/Gameboy-Camera-Flashcart repository on GitHub. It is a 2-layer board of 51 × 70 mm with 26 parts on 84 nets, routed with 1,039 tracks and 77 vias.
It is built around the AM29F016D, FM28V100-TG and RT9013-33GB, with the B9B-ZR-SM4-TF and K3-1296S-E1 among its other parts. Its parts include 15 capacitors, 5 ICs, 1 resistor, 1 diode and 1 connector.
Main components
5AM29F016D
SOP-44-1.27mmSOP-44-1.27mm New Arrivals ROHSAMDUncategorised
FM28V100-TG
TSOPI-32-8.0mmTSOPI-32-8.0mm FRAM ROHSInfineon TechnologiesFRAM
RT9013-33GB
SOT-23-5-40℃~+125℃@(Tj) 1 25uA 3.3V 30uVrms 400mV@(500mA) 5.5V 500mA 50dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B9B-ZR-SM4-TF
SMD,P=1.5mmWire To Board ConnectorJST
K3-1296S-E1
SMD,6.6x2.7mm-25℃~+80℃ 1.4mm 10000 times 2.7mm 300mA 4V 6.6mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD,6.6x2.7mm Slide Switches ROHSHRO ElectronicsSlide Switches
README
README.mdMake sure you read the License (Attribution-NonCommercial-ShareAlike 4.0 International)
If you want to support me for free (and get 5 USD in new user credit) you can use my PCBWay Referral link when signing up on PCBWay
Make sure you read the License!
Flashing:
Flashing has only been tested with a GBxCart, flashing both 1MB sections requires this custom software, which is a modified version of InsideGadget's 2x2MB MBC3 software, or FlashGBX v3.2 and above.
BOM:
| Reference | Part Number | Description |
|---|---|---|
| C1 | 4x4.5mm 22uF | 22uF 16V 4x4.5 Electrolytic Capacitor |
| C2, C3, C4, C12, C13 | TCC0603X7R104J500CT | 100nF 0603 Capacitor |
| C5, C6, C7, C8, C9, C10, C11 | CC0402KRX7R7BB104 | 100nF 0402 Capacitor |
| C14, C15 | CC0603JRNPO9BN220 | 22pF 0603 Capacitor |
| R1 | RC0603JR-071KL | 1K Ω 0603 Resistor |
| D1 | Diode | Harvest D2 from original cartridge |
| J1 | B9B-ZR-SM4-TF | Camera Connector, Harvest or buy (JST ZH1.5MM 9 Pin) |
| SW1 | K3-1296S-E1 | SPDT Switch (For 2x1MB Rom Switching) |
| U1 | MAC-GBD | Harvest U1 from original cartridge |
| U2 | AM29F016 | 2MB Flash |
| U3 | FM28V100 | 1MB FRAM |
| U4 | TPRT9013-33G | 3.3V Voltage Regulator |
Makes use of djedditt's gamepak footprint
Looking for a ready to use flashcart? check out InsideGadgets custom flashcart, the Insidegadgets' PicNRec AIO
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C8, C9, C10, C11 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C12, C13 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_4x4.5 | C1 |
| 1 | AM29F016 | Custom:AM29F0XX | U2 |
| 1 | B9B-ZR-SM4-TF | Custom:JST_B9B-ZR-SM4-TF | J1 |
| 1 | CartBus | Connector_GameBoy:GameBoy_GamePak_CGB-002_P1.50mm_Edge | U0 |
| 1 | Diode | Diode_SMD:D_SOD-123 | D1 |
| 1 | FM28V100 | Package_SO:TSOP-I-32_11.8x8mm_P0.5mm | U3 |
| 1 | K3-1296S-E1 | Custom:SW_SPDT-K3-1296S-E1 | SW1 |
| 1 | LOGO | Custom:HDR_Logo_Small | G*** |
| 1 | MAC-GBD | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | Nintendo_3x3_GNDPad | Custom:Nintendo_3x3_GNDPad | PAD* |
| 1 | RT9013-33GB | Package_TO_SOT_SMD:SOT-23-5 | U4 |
Questions
How big is the MAC GBD Flashcart PCB?
It measures 51 × 70 mm and has 2 copper layers, 0.8 mm thick.
What parts does the MAC GBD Flashcart use?
26 parts, built around the AM29F016D, FM28V100-TG, RT9013-33GB and B9B-ZR-SM4-TF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAC GBD Flashcart KiCad files?
From the HDR/Gameboy-Camera-Flashcart repository on GitHub, at the commit this page was made from: the board is KiCad/MAC-GBD-Flashcart/MAC-GBD-Flashcart.kicad_pcb and its schematic KiCad/MAC-GBD-Flashcart/MAC-GBD-Flashcart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAC GBD Flashcart design in my own project?
Its repository states no licence, so its author keeps all rights: ask HDR before reusing the design.
Similar boards
- 4 layers51 × 57.3 mm
GBA Cartridge
radodge/Portfolio
This is a space for code elements of my professional portfolio.
39 parts1 - 2 layers82.4 × 79.7 mm
- 2 layers71.2 × 52.3 mm
- 2 layers94.8 × 70.5 mm
- 2 layers115.6 × 106.7 mm
ErgoSNM v3 left
siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta
90 parts172CERN-OHL-P-2.0 - 8 layers34 × 34 mm
OpenDrone AIO FC F405 HW
phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.
211 parts53MIT - 4 layers121.9 × 44.4 mm
