
Campfire console
MeghanaM4/campfire-console
PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons

Shitty kitty v2 is an open-source printed circuit board by Uberfoo-Heavy-Industries, from the Uberfoo-Heavy-Industries/shitty-kitty-v2 repository on GitHub. It is a 2-layer board of 82.4 × 79.7 mm with 65 parts on 92 nets, routed with 576 tracks and 92 vias.
It is built around the RP2040, TPS63051RMWR and W25Q128JVSIQ, with the BQ24072RGTR, KMR221GLFS and 1269AS-H-1R5M=P2 among its other parts. Its parts include 21 capacitors, 11 resistors, 11 connectors, 7 switches and 4 ICs. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16 |
| 5 | KMR221GLFS | KMR221GLFS:SW4_KMR221GLFS_CNK | SW1, SW2, SW3, SW4, SW5 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R5, R6, R7 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8, J9, J10, J11 |
| 2 | H4, H5 | ||
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C19 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R3, R4 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C18 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J5 |
| 2 | DNF | Library:Badgelife-SAOv169-BADGE-2x3 | J2, J3 |
| 2 | JLCPCB Tooling Hole | JLCPCB:JLCPCB Tooling Hole | H1, H2 |
| 1 | 1.13k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 1269AS-H-1R5M=P2 | SamacSys_Parts:1269ASH100NP2 | L1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | ABM2-12.000MHZ-D4Y-T | SamacSys_Parts:ABM212000MHZD4YT | Y1 |
| 1 | BM03B-SRSS-TBLFSN | footprints:CONN_BM03B-SRSS-TBLFSN_JST | J7 |
| 1 | BQ24072RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U1 |
| 1 | CHRG | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | DNF | Capacitor_SMD:C_0402_1005Metric | R2 |
| 1 | K3-1296S-E1 | switches:K31296SE1 | S2 |
| 1 | LOGO | project:shitty_kitty_v2-back-artwork | G*** |
| 1 | LOGO | project:shitty_kitty_v2-front-artwork | G*** |
| 1 | PG | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | S2B-PH-SM4-TB_LF__SN_ | SamacSys_Parts:S2BPHSM4TBLFSN | J6 |
| 1 | SKSCLDE010 | SamacSys_Parts:SKSCLDE010 | S1 |
| 1 | TPS63051RMWR | SamacSys_Parts:QFN50P250X250X100-12N-D | IC2 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |

MeghanaM4/campfire-console
PCB Badges with TFT display, NFC module, lipo battery charging, and 6 programmable buttons



Haimana/MAIANA_BLUE
Firmware and hardware materials for the MAIANA-class AIS transponder ecosystem. The design builds on the open MAIANA project (GPL v3, Peter Antypas).




It measures 82.4 × 79.7 mm and has 2 copper layers, 1 mm thick.
65 parts, built around the RP2040, TPS63051RMWR, W25Q128JVSIQ and BQ24072RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Uberfoo-Heavy-Industries/shitty-kitty-v2 repository on GitHub, at the commit this page was made from: the board is shitty_kitty_v2.kicad_pcb and its schematic shitty_kitty_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Uberfoo-Heavy-Industries before reusing the design.