

Master board
HomeBrew Robotics Club Robot Platform
- Size
- 145.3 × 156.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 226
- Nets
- 345
- Pads
- 1,005
- Tracks, vias
- 7,966, 647
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2019
- Updated
- 25 Jul 2021
Overview
Master board is an open-source printed circuit board by hbrobotics, from the hbrobotics/hbrc_ros_robot_platform repository on GitHub. It is a 4-layer board of 145.3 × 156.6 mm with 226 parts on 345 nets, routed with 7,966 tracks and 647 vias.
Its parts include 61 resistors, 30 connectors, 25 transistors, 23 capacitors and 22 ICs. It belongs with the robots and motor control boards of this library.
README
electrical/wow_fix/rev_a/README.mdLD06 Lidar Adapter
The LD06 is an inexpensive and small LIDAR produced by LDROBOT. It is available in the United State via Amazon for approximately $100 (as of late December 2020.) There is techinical documenation available.
The adpater board converts from the generic HR2 daughter board format to the 4-pin connector used by the LD06. The host microcontroller is responsible for providing a PWM signal and a UART to listen for the returned data stream from the LD06.
Parts
226| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 2N7002;SOT23 | Package_TO_SOT_SMD:SOT-23 | Q4, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q25 +4 |
| 19 | 100KΩ;1005 | Resistor_SMD:R_0402_1005Metric | R14, R15, R16, R18, R19, R21, R22, R23, R24, R43, R47, R48, R49, R50, R51, R52 +3 |
| 16 | 270Ω;1608 | Resistor_SMD:R_0603_1608Metric | R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42 |
| 16 | LED;GRNRA | HR2:LED_GRNRA | D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 |
| 14 | 0.1µF;1005 | Capacitor_SMD:C_0402_1005Metric | C6, C8, C11, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C23 |
| 8 | SENSE;M1x3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | CN22, CN23, CN24, CN25, CN26, CN27, CN28, CN29 |
| 6 | GND | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2, TP3, TP4, TP5, TP6, TP8 |
| 6 | HOLE;M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4, H5, H6 |
| 5 | 0Ω;3216 | Resistor_SMD:R_1206_3216Metric | R9, R10, R11, R12, R56 |
| 5 | GROVE;20x20 | HR2:GROVE20x20 | GV1, GV2, GV3, GV4, GV5 |
| 5 | LEDGRN;1608 | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 5 | SHUNT;M1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2, JP3, JP4, JP5, JP10 |
| 4 | 10KΩ;1005 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | SN74HC595;TSSOP16 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U7, U8, U9, U13 |
| 3 | HCSR04LP;F1X4 | HR2:HCSR04_F1x4LP | CN12, CN14, CN16 |
| 3 | LM5050-1;TSOT-23-6 | Package_TO_SOT_SMD:TSOT-23-6 | U1, U2, U3 |
| 3 | NFET_3A_GSD;SOT23 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SERVO;M1x3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | CN13, CN15, CN17 |
| 2 | .16Ω.25W;2012 | Resistor_SMD:R_0805_2012Metric | R25, R26 |
| 2 | 120Ω.25W;3216 | Resistor_SMD:R_1206_3216Metric | R58, R59 |
| 2 | 15pF;1608 | Capacitor_SMD:C_0603_1608Metric | C5, C7 |
| 2 | 1KΩ;1005 | Resistor_SMD:R_0402_1005Metric | R17, R44 |
| 2 | 220Ω;1005 | Resistor_SMD:R_0402_1005Metric | R6, R8 |
| 2 | 300Ω;1608 | Resistor_SMD:R_0603_1608Metric | R60, R61 |
| 2 | 33Ω;1005 | Resistor_SMD:R_0402_1005Metric | R5, R20 |
| 2 | 470µF,25Vmin;D10P5H13max | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2, C4 |
| 2 | 74x11G1;TSOP6 | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | U16, U17 |
| 2 | BUTTON;6x6 | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2 |
| 2 | CD4504B;TTSOP16 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U10, U11 |
| 2 | CPC1017N;SOP4W3.8L4.1 | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U21, U22 |
| 2 | HCSR04LP;F1X4 | HR2:HCSR04_F1x4H | CN9, CN10 |
| 2 | HCSR04LP;F1X4 | HR2:HCSR04_F1x4 | CN11, CN19 |
| 2 | HR2_ENCODER;2xF1x3 | HR2:ENCODER_2xF1x3 | CN6, CN7 |
| 2 | LED_EN;M1x3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP8 |
| 2 | MCP2542;SOIC8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U18, U19 |
| 2 | PFET_6A_GSD;SOT23 | Package_TO_SOT_SMD:SOT-23 | Q5, Q24 |
| 2 | SN74HC165;TSSOP16 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U14, U15 |
| 1 | 0.01µF;1005 | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 1000µF@10Vmin;D10P5H13max | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3 |
| 1 | 100KΩ;1608 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 10µF;1608 | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 120Ω;1005 | Resistor_SMD:R_0402_1005Metric | R57 |
| 1 | 2.2KΩ;1005 | Resistor_SMD:R_0402_1005Metric | R45 |
| 1 | 2.2µF6.3V;1608 | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 3.3KΩ;1005 | Resistor_SMD:R_0402_1005Metric | R46 |
| 1 | 3.3V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP7 |
| 1 | 32.768kHz12.5pF;3.2x1.5 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | X1 |
| 1 | 560Ω;1608 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP10 |
| 1 | 74LVC1G74;TSSOP8 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U20 |
| 1 | 9V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP11 |
| 1 | ACS711;SOIC8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | AMS1117-3.3V800mA_GOI;SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | VR1 |
| 1 | CAT24C32;SOIC8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | COIN_HOLDER6.8R;TE1376164-1 | HR2:TE1376164-1_COINHOLDER6.8 | BT1 |
| 1 | DRV8833PWPR;HTSSOP16EP3.4x5 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias | U6 |
| 1 | EXT_ESTOP;M1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP9 |
| 1 | JUMPER;M1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP7 |
| 1 | LIDAR_ADAPTER;2xF1x4_F1x3 | HR2:LIDAR_ADAPTER_2xF1x4_F1x3 | CN21 |
| 1 | MCP7940;SOIC8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | NUCLEO-F767ZI;2xF2x35 | HR2:NUCLEO_F767ZI_2xF2x35 | CN20 |
| 1 | P5V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP9 |
| 1 | POLOLU_U3V70F9;F1x4+F1x5 | HR2:U3V70xMATE_F1x4+F1x5 | CN3 |
| 1 | RASPI;F2X20 | HR2:RASPI_F2X20 | CN5 |
| 1 | REDLED;1608 | LED_SMD:LED_0603_1608Metric | D22 |
| 1 | RPI_DISP_EN;M1x3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP6 |
| 1 | RPI_DSP_PWR;M1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | CN4 |
| 1 | SBC_RX;M1x2 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP13 |
| 1 | SERVO;M1x4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | CN18 |
| 1 | SPC_TX;M1x2 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP12 |
| 1 | STADAPTER;F2x4 | HR2:STADAPTER_F2x4 | CN8 |
| 1 | Ta22µF6.3V;3216 | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | USB-C;USB-C | Connector_USB:USB_C_Receptacle_JAE_DX07S024WJ3R400 | CN2 |
| 1 | USB-C;USB-C,POGND | Connector_USB:USB_C_Receptacle_JAE_DX07S024WJ3R400 | CN1 |
| 1 | USB5V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | WOW_OUT;M2x6S | HR2:PinHeader_2x06_P2.54mm_Vertical_Shrouded | CN30 |
| 1 | WOW_RX;M1x1 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP15 |
| 1 | WOW_TX;M1x1 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP14 |
| 1 | ~nESTOP_SET | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP16 |
| 1 | ~nWOW_ESTOP;M1x1 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP17 |
More from hbrobotics/hbrc_ros_robot_platform
10- 2 layers14.8 × 48 mm

- 2 layers14.8 × 48 mm

- 2 layers14.8 × 48 mm

- 2 layers20 × 12 mm

- 2 layers23.5 × 12 mm

- 2 layers12 × 14 mm

- 2 layers40 × 24.6 mm

- 2 layers40 × 24.6 mm

- 2 layers40 × 24.6 mm

- 2 layers34 × 24 mm

Similar boards
- 4 layers97.6 × 145.1 mm

Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers31.4 × 70 mm

UPLC Panel
fredriknk/uPLC-Stack
Quick note, this is then panelization repo, head for the individual repos to get design files.
226 parts9 - 4 layers153 × 148 mm

Keep breathing ctrl
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
226 parts5 - 4 layers100 × 90 mm

- 4 layers188 × 92 mm

Cooksense
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
226 parts3MIT - 4 layers

Service section controller
olin-electric-motorsports/MKV-Boards
Repository for all OEM MKV PCB Projects
226 parts3 - 4 layers100 × 72 mm

FLEADiP
dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project
226 parts2LGPL-2.1 - 4 layers186 × 226 mm

Questions
How big is the Master board PCB?
It measures 145.3 × 156.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Master board use?
226 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Master board KiCad files?
From the hbrobotics/hbrc_ros_robot_platform repository on GitHub, at the commit this page was made from: the board is electrical/master_board/rev_a/master_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Master board design in my own project?
Its repository states no licence, so its author keeps all rights: ask hbrobotics before reusing the design.