Skip to the content
4 layers100 × 115 mmInstrumentation v2, the printed circuit board in 3D

C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

Size
100 × 115 mm
Copper layers
4
Thickness
1.6 mm
Parts
136
Nets
105
Pads
472
Tracks, vias
843, 139
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
12 Oct 2026
Updated
12 Oct 2026

Overview

Instrumentation v2 is an open-source printed circuit board by harrymander, from the harrymander/fph-snippets-github repository on GitHub. It is a 4-layer board of 100 × 115 mm with 136 parts on 105 nets, routed with 843 tracks and 139 vias.

It is built around the MAX4466EXK+ and PCA9306DP. Its parts include 37 resistors, 31 capacitors, 18 connectors, 6 ICs and 6 switches.

Main components

2

README

README.md

Code samples

  1. recap-instrumentation: Research data collection device.

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    • recap-instrumentation/sw/src/sensors.c: sensor reading in timer ISR.
    • recap-instrumentation/sw/drivers/twi-async/twi-async.c: interrupt-driven 'asynchronous' I2C read.
  2. recap-usb-reader: Host application for the device above.

    Cross-platform C++ project for realtime data acquisition and visualisation. Uses Dear ImGui immediate mode GUI framework. GUI and application logic run from the event loop of graphics framework (DirectX on Windows, GLFW on Linux).

    Modules of interest:

    • recap-usb-reader/gui/src/device.hpp: boundary between the device library and the GUI. State pattern.
    • recap-usb-reader/gui/src/observable.hpp: observer pattern used to decouple the device layer from the GUI views.
    • recap-usb-reader/lib/usb-reader/include/recap/usb-reader/reader.hpp: device library interface.
  3. swallow-labeller: Tool for annotating recordings from the device. (complete-swallow-labelling branch).

    C++, Dear ImGui. Modules of interest:

    • swallow-labeller/src/gui/task-filter.cpp: defining filters for different items in GUI list. Example of runtime polymorphism.
    • swallow-labeller/src/gui/task-view.cpp, lines 203-346: undo/redo using the command pattern.

Parts

136
QtyValueFootprintReferences
16100nCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C6, C9, C10, C11, C14, C15, C16, C27, C28, C30, C31
110Resistor_SMD:R_0603_1608MetricR20, R21, R22, R23, R24, R25, R26, R27, R30, R31, R37
82k2Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R18, R19, R34, R36
40(DNP)Resistor_SMD:R_0603_1608MetricR28, R29, R32, R33
41MResistor_SMD:R_0603_1608MetricR10, R11, R12, R13
41uCapacitor_THT:C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2C21, C22, C23, C24
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
31uCapacitor_SMD:C_0603_1608MetricC17, C19, C20
3200kResistor_SMD:R_0603_1608MetricR16, R17, R35
2100pCapacitor_SMD:C_0603_1608MetricC25, C26
210kResistor_SMD:R_0603_1608MetricR8, R9
227Resistor_SMD:R_0603_1608MetricR5, R6
227pCapacitor_SMD:C_0603_1608MetricC7, C8
24u7Capacitor_SMD:C_0603_1608MetricC12, C18
2GNDTestPoint:TestPoint_Bridge_Pitch7.62mm_Drill1.3mmTP26, TP27
2MAX4466Package_TO_SOT_SMD:SOT-23-5U4, U5
11Resistor_SMD:R_0603_1608MetricR7
110uCapacitor_SMD:C_0805_2012MetricC13
112MHzCrystal:Crystal_SMD_0603-4Pin_6.0x3.5mmY1
120kResistor_SMD:R_0603_1608MetricR15
12kResistor_SMD:R_0603_1608MetricR14
12u2Capacitor_SMD:C_0603_1608MetricC29
13V3_GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ15
15V_GNDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ14
1AREFConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ11
1A_MISOTestPoint:TestPoint_Keystone_5019_MinatureTP20
1A_MOSITestPoint:TestPoint_Keystone_5019_MinatureTP22
1A_SPCKTestPoint:TestPoint_Keystone_5019_MinatureTP21
1A_nPCS0TestPoint:TestPoint_Keystone_5019_MinatureTP23
1BTN1Button_Switch_SMD:SW_SPST_PTS645SW2
1BTN1Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalJ8
1BTN2Button_Switch_SMD:SW_SPST_PTS645SW3
1BTN2Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalJ18
1BTN3Button_Switch_SMD:SW_SPST_PTS645SW4
1BTN3Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalJ19
1D+TestPoint:TestPoint_Keystone_5019_MinatureTP2
1D-TestPoint:TestPoint_Keystone_5019_MinatureTP1
1EARrecap:CUI_SJ-43514-SMTJ3
1EAR_AMPTestPoint:TestPoint_Keystone_5019_MinatureTP16
1EAR_BTestPoint:TestPoint_Keystone_5019_MinatureTP15
1ERASEConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1EarConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ9
1FLOWrecap:MOLEX_5600200420J5
1FSCLTestPoint:TestPoint_Keystone_5019_MinatureTP25
1FSDATestPoint:TestPoint_Keystone_5019_MinatureTP24
1FerriteBeadInductor_SMD:L_0805_2012MetricFB1
1H2SConnector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_VerticalJ4
1H2S_RXTestPoint:TestPoint_Keystone_5019_MinatureTP18
1H2S_TXTestPoint:TestPoint_Keystone_5019_MinatureTP19
1LED1LED_SMD:LED_0603_1608MetricD1
1LED1Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ16
1LED2Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ17
1LED2LED_SMD:LED_0603_1608MetricD2
1LEDsConnector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_VerticalJ12
1MASKrecap:CUI_SJ-43514-SMTJ7
1MASK_AMPTestPoint:TestPoint_Keystone_5019_MinatureTP17
1MASK_BTestPoint:TestPoint_Keystone_5019_MinatureTP14
1MAX1167Package_SO:QSOP-16_3.9x4.9mm_P0.635mmU2
1MaskConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ10
1Micro SDrecap:microSD_HC_Molex_104031-0811J13
1PCA9306DPPackage_SO:TSSOP-8_3x3mm_P0.65mmU6
1PRESSURErecap:MOLEX_5600200420J6
1RESETButton_Switch_SMD:SW_SPST_PTS645SW1
1SAM4S16BPackage_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mmU1
1SCL1TestPoint:TestPoint_Keystone_5019_MinatureTP4
1SCL2TestPoint:TestPoint_Keystone_5019_MinatureTP6
1SDA1TestPoint:TestPoint_Keystone_5019_MinatureTP3
1SDA2TestPoint:TestPoint_Keystone_5019_MinatureTP5
1SD_CLKTestPoint:TestPoint_Keystone_5019_MinatureTP11
1SD_CSTestPoint:TestPoint_Keystone_5019_MinatureTP9
1SD_DETTestPoint:TestPoint_Keystone_5019_MinatureTP13
1SD_MISOTestPoint:TestPoint_Keystone_5019_MinatureTP12
1SD_MOSITestPoint:TestPoint_Keystone_5019_MinatureTP10
1SFM3000recap:SFM3000S1
1SPD8xx_Digitalrecap:SPD8xxS2
1SWCLKTestPoint:TestPoint_Keystone_5019_MinatureTP7
1SWDConnector_IDC:IDC-Header_2x05_P2.54mm_HorizontalJ1
1SWDIOTestPoint:TestPoint_Keystone_5019_MinatureTP8
1SWD_3V3Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1TLV70233_SOT23-5Package_TO_SOT_SMD:SOT-23-5U3

The 135 most common of 136 parts.

More from harrymander/fph-snippets-github

3
  • 4 layers100 × 115 mmInstrumentation v3, the printed circuit board in 3D

    Instrumentation v3

    harrymander/fph-snippets-github

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    157 parts
  • 4 layers100 × 50 mmInstrumentation, the printed circuit board in 3D

    Instrumentation

    harrymander/fph-snippets-github

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    74 parts
  • 4 layers79.8 × 27.9 mmH2s breakout, the printed circuit board in 3D

    H2s breakout

    harrymander/fph-snippets-github

    C project for Atmel (Microchip) ATSAM4S16B using Freertos. Modules of interest:

    7 parts

Similar boards

  • 2 layers65 × 56.5 mmLtp kikad, the printed circuit board in 3D

    Ltp kikad

    ADDTDR/Pitanga

    Prototype 0.01 | Pitanga V1 | Pitanga V2.1a :-------------------------:|:-------------------------:|:-------------------------: | |

    54 parts4MIT
  • 2 layers125 × 70 mmLTP305 ESP32 CLOCK, the printed circuit board in 3D

    LTP305 ESP32 CLOCK

    BasementCircuits/BulletTime

    ESP32 based clock using LTP305 led matrices

    65 parts4MIT
  • 4 layers31.7 × 110 mmTiliqua motherboard, the printed circuit board in 3D

    Tiliqua motherboard

    antoinevg/tiliqua

    A powerful, hackable FPGA-based audio multitool for Eurorack.

    134 partsCERN-OHL-S-2.0
  • 4 layers124 × 62 mmCarte puissance, the printed circuit board in 3D

    Carte puissance

    INSA-GEI/gei-nxpcup-4w-pwr

    Power part for 4 wheels model car used in NXPCUP contest at INSA-GEI

    110 partsMIT
  • 4 layers100 × 100 mmJhl synth0, the printed circuit board in 3D

    Jhl synth0

    koyoi/jhl_synth0_pcb

    218 parts
  • 2 layers60.8 × 70.9 mmOLED01, the printed circuit board in 3D

    OLED01

    mlab-modules/OLED01

    OLED module with SSD1306 controller, I2C interface level shifter, integrated buzzer, touchscreen, and LEDs.

    54 partsGPL-3.0

Questions

How big is the Instrumentation v2 PCB?

It measures 100 × 115 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Instrumentation v2 use?

136 parts, built around the MAX4466EXK+ and PCA9306DP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Instrumentation v2 KiCad files?

From the harrymander/fph-snippets-github repository on GitHub, at the commit this page was made from: the board is recap-instrumentation/hw/board-v2/instrumentation-v2.kicad_pcb and its schematic recap-instrumentation/hw/board-v2/instrumentation-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Instrumentation v2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask harrymander before reusing the design.