4 layers110 × 40.7 mm
Drone V2 Remote
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
49 parts915
4 layers100 × 100 mm
Breakout-68040
harrowm/Breakout-680401A breakout board for the 68LC040
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 166
- Pads
- 555
- Tracks, vias
- 1,330, 58
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Mar 2024
- Updated
- 14 Mar 2025
Overview
Breakout-68040 is an open-source printed circuit board by harrowm, from the harrowm/Breakout-68040 repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 100 mm with 49 parts on 166 nets, routed with 1,330 tracks and 58 vias.
It is built around the DS1232SN+. Its parts include 22 capacitors, 10 connectors, 9 diodes, 3 ICs and 1 resistor. It belongs with the interfaces and adapters boards and the FPGA and CPLD boards of this library.
Main components
1README
README.mdBreakout-68040
A breakout board for the 68LC040
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C10, C11, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C23, C29 +6 |
| 8 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D19, D20, D21, D22, D23, D24, D25, D26 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_02x32_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x32_P2.54mm_Vertical | J1, J4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1K | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | ATF22V10C-7PU | Package_DIP:DIP-24_W7.62mm_LongPads | IC2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J6 |
| 1 | Conn_01x32_Pin | Connector_PinHeader_2.54mm:PinHeader_1x32_P2.54mm_Vertical | J3 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J8 |
| 1 | Conn_02x16_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J5 |
| 1 | DS1232S+ | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | IC1 |
| 1 | MC680LC40 | mc68lc040:PGA179_BIG | U1 |
| 1 | Power LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0603 | RN2 |
| 1 | Reset | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | SG-615 | Oscillator:Oscillator_SMD_SeikoEpson_SG8002JA-4Pin_14.0x8.7mm | X1 |
Questions
How big is the Breakout-68040 PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Breakout-68040 use?
49 parts, built around the DS1232SN+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout-68040 KiCad files?
From the harrowm/Breakout-68040 repository on GitHub, at the commit this page was made from: the board is Breakout-68040/Breakout-68040.kicad_pcb and its schematic Breakout-68040/Breakout-68040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout-68040 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers44.5 × 82.6 mm
- 4 layers41 × 35 mm
- 4 layers80 × 73.8 mm
ESP32-Bit Pirate Dock
AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
49 parts85CERN-OHL-W-2.0 - 4 layers19 × 32 mm
- 4 layers80 × 80 mm
- 4 layers42.8 × 36.8 mm
- 4 layers66.9 × 87 mm
MeshtasticNode BQ25185
h0lad/SolarMeshtasticNode
This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.
49 parts40CERN-OHL-S-2.0