

- Size
- 72 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 137
- Nets
- 75
- Pads
- 375
- Tracks, vias
- 651, 118
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jun 2020
- Updated
- 25 Dec 2020
Overview
PL1 is an open-source printed circuit board by harris-newsteder, from the harris-newsteder/PL1 repository on GitHub. It is a 4-layer board of 72 × 70 mm with 137 parts on 75 nets, routed with 651 tracks and 118 vias.
It is built around the LM339, SI8645BA-B-IU and ZXMP10A13FTA. Its parts include 52 resistors, 24 capacitors, 14 ICs, 8 diodes and 2 connectors.
Main components
3LM339
SOP-140℃~+70℃ 1.1mA 1.5mV 150ns 2.3nA 2V~32V 32V 57nA DTL、TTL、CMOS Four channels Open Collector SOP-14 Comparators ROHSJSMSEMIComparatorsSI8645BA-B-IU
QSOP-16-40℃~+125℃ 0 1000 150Mbps 4 50kV/us Low Level QSOP-16 Digital Isolators ROHSSkyworks SolutionsDigital IsolatorsZXMP10A13FTA
SOT-23-55℃~+150℃ 1 P-Channel 1.8nC 10.8pF 100V 141pF 1Ω@10V 2V 625mW 700mA SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
137| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 10k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +24 |
| 28 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +12 |
| 24 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +8 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | STG719STR | Package_TO_SOT_SMD:SOT-23-6 | U4, U5, U7, U8, U10, U11, U13, U14 |
| 4 | LM339 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3, U6, U9, U12 |
| 2 | Si8645BA-B-IU | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | U1, U2 |
| 1 | 240R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 316R | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 360R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 732R | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | INPUT TERMINAL | newsteder:TerminalBlock_Phoenix_PT-1,5-10-5.0-H_1x10_P5.00mm_Horizontal | J1 |
| 1 | LOGO | newsteder:NEWSTEDER_Logo | G*** |
| 1 | LOGO | newsteder:PL1-0 | G*** |
| 1 | MODE SELECT SWITCH | Button_Switch_THT:SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW1 |
| 1 | OUTPUT TERMINAL | newsteder:TerminalBlock_Phoenix_PT-1,5-10-5.0-H_1x10_P5.00mm_Horizontal | J2 |
| 1 | ZXMP10A13FTA | Package_TO_SOT_SMD:SOT-23 | Q1 |
The 132 most common of 137 parts.
Similar boards
- 4 layers72 × 70 mm

- 2 layers82.8 × 63 mm

- 2 layers79 × 89 mm

Bms v1
azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.
175 parts22 - 2 layers110 × 100 mm

Jbc miniregler
KarlZeilhofer/htl-loetregler-mini
Einfacher Regler für JBC Lötspitzen der Serie T210, T245 und T470, Weller RT-Spitzen und TS100-Spitzen sollten auch funktionieren.
180 parts2MIT - 4 layers99.9 × 99.9 mm

Hub
BCIT-BAJA/BCIT-BAJA-DAQ
The telemetry system for BCIT-BAJA car, collects strain across suspension components of car to allow BAJA to optimize material and reinforce weak areas of suspension.
101 parts - 2 layers75 × 100 mm

Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers50.8 × 107.9 mm

- 2 layers40 × 100 mm

Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0
Questions
How big is the PL1 PCB?
It measures 72 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PL1 use?
137 parts, built around the LM339, SI8645BA-B-IU and ZXMP10A13FTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PL1 KiCad files?
From the harris-newsteder/PL1 repository on GitHub, at the commit this page was made from: the board is pcb/0/0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PL1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask harris-newsteder before reusing the design.