
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

I'm Hardik Rawat, and this repo is my log of learning PCB design in KiCad. I'm aiming to design a new board every few days.
Praticenew is an open-source printed circuit board by hardikrawat910-byte, from the hardikrawat910-byte/pcb-journey repository on GitHub. It is a 2-layer board of 82 × 49 mm with 14 parts on 31 nets, routed with 47 tracks and 4 vias.
It is built around the MAX30102. Its parts include 4 resistors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
I'm Hardik Rawat, and this repo is my log of learning PCB design in KiCad. I'm aiming to design a new board every few days. Each board practises one new skill, and each one comes with the KiCad files, a review of what went wrong, and what I learned.
| # | Board | Dates | New skill practised | Status |
|---|---|---|---|---|
| 01 | Pulse Monitor | 12–13 Oct 2026 | First full schematic → layout flow: custom symbols and footprints, a GND pour, a 2-layer stackup | ✅ DRC clean, not yet fabricated |
The roadmap below is a rough order. Each new board should tick off at least one item.
.
├── README.md this journey log
├── boards/
│ └── 01-pulse-monitor/ one folder per board
│ ├── README.md what it is, images, what I learned
│ ├── hardware/ KiCad project and local libraries
│ ├── bom/ bill of materials
│ └── docs/ design review and images
└── templates/
└── BOARD_README_TEMPLATE.md copy this when starting a new boardboards/NN-short-name/ and put the KiCad project in hardware/. Keep custom libraries inside the project, linked with ${KIPRJMOD}.templates/BOARD_README_TEMPLATE.md to the board folder as README.md and fill it in.docs/images/.KiCad 9.0. Each board opens on its own. Clone the repo and open the .kicad_pro file inside the board's hardware/ folder.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | DOWN, MENU, UP |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | LED | LED_THT:LED_D5.0mm | ALARM |
| 1 | MAX30102 | Library:MAX30102_Module | U1 |
| 1 | OLED | Library:SSD1306 | U2 |

sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

theheraldproject/herald-hardware
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

abhinav937/RP2040_SOS_band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

Epivaral/CursoIoT
Material complementario del curso: INTRODUCCIÓN A IOT, ALMACENAMIENTO EN LA NUBE Y ANÁLISIS DE DATA

Ghost3379/NX-ISD
A more sophisticated version of the Artemis Watch by Circuitmess.


Soham3126/DIY-SPO2-KiCAD-Project
A low-cost, non-invasive Pulse Oximeter (SpO2) and Heart Rate monitor based on the MAX30102 sensor and Arduino. This project features real-time PPG signal processing, I2C communication, and a custom PCB design for…

Taller-de-sistemas-embebidos-tps/tdse-tf_2-01
Trabajo Final - Taller de Sistemas Embebidos - FIUBA
It measures 82 × 49 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hardikrawat910-byte/pcb-journey repository on GitHub, at the commit this page was made from: the board is boards/01-pulse-monitor/hardware/Praticenew.kicad_pcb and its schematic boards/01-pulse-monitor/hardware/Praticenew.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hardikrawat910-byte before reusing the design.