Skip to the content
2 layers82 × 49 mmPraticenew, the printed circuit board in 3D

I'm Hardik Rawat, and this repo is my log of learning PCB design in KiCad. I'm aiming to design a new board every few days.

Size
82 × 49 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
31
Pads
67
Tracks, vias
47, 4
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
13 Oct 2026
Updated
13 Oct 2026

Overview

Praticenew is an open-source printed circuit board by hardikrawat910-byte, from the hardikrawat910-byte/pcb-journey repository on GitHub. It is a 2-layer board of 82 × 49 mm with 14 parts on 31 nets, routed with 47 tracks and 4 vias.

It is built around the MAX30102. Its parts include 4 resistors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

PCB Journey: from first board to mastery

Boards KiCad Started

I'm Hardik Rawat, and this repo is my log of learning PCB design in KiCad. I'm aiming to design a new board every few days. Each board practises one new skill, and each one comes with the KiCad files, a review of what went wrong, and what I learned.

Boards

#BoardDatesNew skill practisedStatus
01Pulse Monitor12–13 Oct 2026First full schematic → layout flow: custom symbols and footprints, a GND pour, a 2-layer stackup✅ DRC clean, not yet fabricated
01 · Pulse Monitor
Board 01

Skills roadmap

The roadmap below is a rough order. Each new board should tick off at least one item.

  • Schematic capture, custom symbols, custom footprints
  • Copper pours, a 2-layer stackup, passing DRC
  • Ordering a board and assembling it (Gerbers, drill files, BOM)
  • SMD parts (0805 to 0603) and hand soldering
  • On-board power: an LDO, then a buck converter, laid out to its datasheet
  • A bare microcontroller instead of a dev module (ESP32 or ATmega with its support parts)
  • USB-C power and data, ESD protection
  • Li-ion charging and battery protection
  • Differential pairs and impedance-controlled traces
  • A 4-layer board with solid ground and power planes
  • Mixed-signal layout (analog sensor plus digital)

Repo layout

text
.
├── README.md                     this journey log
├── boards/
│   └── 01-pulse-monitor/         one folder per board
│       ├── README.md             what it is, images, what I learned
│       ├── hardware/             KiCad project and local libraries
│       ├── bom/                  bill of materials
│       └── docs/                 design review and images
└── templates/
    └── BOARD_README_TEMPLATE.md  copy this when starting a new board

Adding a new board

  1. Create boards/NN-short-name/ and put the KiCad project in hardware/. Keep custom libraries inside the project, linked with ${KIPRJMOD}.
  2. Copy templates/BOARD_README_TEMPLATE.md to the board folder as README.md and fill it in.
  3. Add screenshots of the schematic, layout, 3D view and DRC result to docs/images/.
  4. Add a row to the Boards table above and update the board-count badge.

Tools

KiCad 9.0. Each board opens on its own. Clone the repo and open the .kicad_pro file inside the board's hardware/ folder.

Parts

14
QtyValueFootprintReferences
3100nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2, C3
310kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3
3SW_PushButton_Switch_THT:SW_PUSH_6mmDOWN, MENU, UP
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1LEDLED_THT:LED_D5.0mmALARM
1MAX30102Library:MAX30102_ModuleU1
1OLEDLibrary:SSD1306U2

Similar boards

  • 4 layers82.8 × 33 mmE ink watch, the printed circuit board in 3D

    E ink watch

    sandgum/Triangulate-ES_01-Watch

    A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

    162 parts22
  • 4 layers28 × 34.7 mmWearable, the printed circuit board in 3D

    Wearable

    theheraldproject/herald-hardware

    Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

    82 parts6
  • 4 layers124.7 × 64.3 mmRP2040 SOS band, the printed circuit board in 3D

    RP2040 SOS band

    abhinav937/RP2040_SOS_band

    PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

    107 parts3
  • 2 layers44 × 88.2 mmModulo 7, the printed circuit board in 3D

    Modulo 7

    Epivaral/CursoIoT

    Material complementario del curso: INTRODUCCIÓN A IOT, ALMACENAMIENTO EN LA NUBE Y ANÁLISIS DE DATA

    11 parts3
  • 4 layers77 × 48.6 mmNX ISD, the printed circuit board in 3D

    NX ISD

    Ghost3379/NX-ISD

    A more sophisticated version of the Artemis Watch by Circuitmess.

    116 parts2GPL-3.0
  • 2 layers75.1 × 50.1 mmPcb tutorial, the printed circuit board in 3D

    Pcb tutorial

    ODARI-CHARLES1/Pcb_Project

    A tutorial on creating a custom symbol and Footprint

    14 parts2
  • 4 layers75 × 50 mmDIY SPO2-KiCAD Project, the printed circuit board in 3D

    DIY SPO2-KiCAD Project

    Soham3126/DIY-SPO2-KiCAD-Project

    A low-cost, non-invasive Pulse Oximeter (SpO2) and Heart Rate monitor based on the MAX30102 sensor and Arduino. This project features real-time PPG signal processing, I2C communication, and a custom PCB design for…

    19 parts2
  • 10 layers100 × 200 mmTdse tf 2-01, the printed circuit board in 3D

    Tdse tf 2-01

    Taller-de-sistemas-embebidos-tps/tdse-tf_2-01

    Trabajo Final - Taller de Sistemas Embebidos - FIUBA

    17 parts2

Questions

How big is the Praticenew PCB?

It measures 82 × 49 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Praticenew use?

14 parts, built around the MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Praticenew KiCad files?

From the hardikrawat910-byte/pcb-journey repository on GitHub, at the commit this page was made from: the board is boards/01-pulse-monitor/hardware/Praticenew.kicad_pcb and its schematic boards/01-pulse-monitor/hardware/Praticenew.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Praticenew design in my own project?

Its repository states no licence, so its author keeps all rights: ask hardikrawat910-byte before reusing the design.