
Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

Cheap PCB: Better understanding the current status of hardware supply chain
Stm32-io extend is an open-source printed circuit board by hardenedlinux, from the hardenedlinux/cheap-pcb repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 33.5 × 43.5 mm with 37 parts on 54 nets, routed with 634 tracks and 19 vias.
It is built around the CH330N and AMS1117-3.3. Its parts include 14 capacitors, 14 resistors, 3 ICs, 3 connectors and 2 switches. It belongs with the STM32 boards of this library.
We did this experimental for fun and profit( better assessment for hardware supply chain security). Read the full story.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C5, C7, C8, C9, C12 |
| 4 | 22 | Resistor_SMD:R_0201_0603Metric | R4, R5, R11, R14 |
| 4 | 5K1 | Resistor_SMD:R_0201_0603Metric | R3, R7, R10, R13 |
| 3 | 10K | Resistor_SMD:R_0201_0603Metric | R6, R8, R9 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C10 |
| 2 | 1K | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0201_0603Metric | C13, C14 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1, J2 |
| 1 | 10nF | Capacitor_SMD:C_0201_0603Metric | C3 |
| 1 | 1K5 | Resistor_SMD:R_0201_0603Metric | R12 |
| 1 | 1uF | Capacitor_SMD:C_0201_0603Metric | C6 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 8MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | CH330N | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_02x16_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x16_P2.54mm_Vertical | J3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SW_DIP_x02 | Button_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2 |

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain





azaslavskis/WLED-Controller
Simple project that takes care of LED strips and connect them using esp32 to home assistant interface



windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
It measures 33.5 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the CH330N and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hardenedlinux/cheap-pcb repository on GitHub, at the commit this page was made from: the board is stm32-io-extend/v1/stm32-io-extend.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).