

FinalTest NanoEsp
- Size
- 149.9 × 91.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 39
- Pads
- 109
- Tracks, vias
- 143, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Oct 2025
- Updated
- 28 Oct 2025
Overview
FinalTest NanoEsp is an open-source printed circuit board by hantanHugues, from the hantanHugues/builded- repository on GitHub. It is a 2-layer board of 149.9 × 91.4 mm with 18 parts on 39 nets, routed with 143 tracks and 0 vias.
It is built around the L298N, BSS138-HF and BSS138L. Its parts include 9 connectors, 4 capacitors, 3 ICs and 2 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3L298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverBSS138-HF
SOT-23MOSFETsComchipBSS138L
SOT-23-55℃~+150℃ 1 N-channel 1.5Ω@10V 1V 2.2pF 25pF 400mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 100µ | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Arduino_Nano | Module:Arduino_Nano | U2 |
| 1 | BSS138H | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | BSS138L | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J9 |
| 1 | Buck_DC_DC | MyCustomFootprintsKCd7:Buck_DC_DC | U3 |
| 1 | Color_GY_33 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J5 |
| 1 | L298N | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Laser_KY-008_1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Laser_KY-008_2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Photo_R1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Photo_R2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | ~ | ESP32:ESP32_30pin | U1 |
Similar boards
- 2 layers113 × 195 mm

- 12 layers180 × 150 mm

Marble
BerkeleyLab/Marble
Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.
1,006 parts35 - 4 layers33.1 × 64.7 mm

- 2 layers95 × 60 mm

- 4 layers140 × 47 mm

- 2 layers27 × 60 mm

OpenFMS
aasmr/openFMS
Open-source filament presence and motion sensor for Klipper 3D printers – includes MCU firmware, PCB design, and 3D printable parts.
41 partsMIT - 2 layers73 × 77.5 mm

Uca dkaiot2-kicad
LEAT-EDGE/ambient-pcb-dkaiot
The design also provides empty footprints for several other sensors which are not populated in the Ambient variant: - Light sensor (LITEON LTR-303ALS-01) - MEMS microphone (Knowles SPH0645LM4H) - Indoor air quality…
184 partsCERN-OHL-P-2.0 - 2 layers45.4 × 71.7 mm

Questions
How big is the FinalTest NanoEsp PCB?
It measures 149.9 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FinalTest NanoEsp use?
18 parts, built around the L298N, BSS138-HF and BSS138L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FinalTest NanoEsp KiCad files?
From the hantanHugues/builded- repository on GitHub, at the commit this page was made from: the board is Documentation/test-final/elec/pcb/FinalTest_NanoEsp.kicad_pcb and its schematic Documentation/semaine-2/electronique/hardware/IFRI_Test2_PCBs/cube_pcb/cube_pcb/cube_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FinalTest NanoEsp design in my own project?
Its repository states no licence, so its author keeps all rights: ask hantanHugues before reusing the design.