
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

65C02 adapter for 6502 socket plus blinkenlights on all address and data lines
Blinkenlights is an open-source printed circuit board by hansliss, from the hansliss/Blinkenlights repository on GitHub. It is a 2-layer board of 56.6 × 69.1 mm with 32 parts on 84 nets, routed with 441 tracks and 6 vias.
It is built around the ULN2803A. Its parts include 25 resistors, 4 ICs and 3 connectors.
65C02 adapter for 6502 socket plus blinkenlights on all address and data lines
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 4k7 | Resistors_SMD:R_0603 | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 3 | ULN2803A | Housings_SOIC:SOIC-18W_7.5x11.6mm_Pitch1.27mm | U2, U3, U4 |
| 1 | 10k | Resistors_SMD:R_0603 | R25 |
| 1 | 6502_socket | Housings_DIP:DIP-40_W15.24mm_Socket | J1 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J3 |
| 1 | Conn_02x24_Odd_Even | Pin_Headers:Pin_Header_Straight_2x24_Pitch2.54mm | J2 |
| 1 | WD65C02 | Housings_DIP:DIP-40_W15.24mm_Socket | U1 |

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters


crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.




It measures 56.6 × 69.1 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hansliss/Blinkenlights repository on GitHub, at the commit this page was made from: the board is Blinkenlights.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hansliss before reusing the design.