4 layers45.3 × 26 mm
GCP-2
HandHeldLegend/GC-Adapter-RP2040
The 3D shell and buttons are licensed under a Creative Commons Attribution 4.0 International License .
47 parts24
4 layers125.5 × 45.6 mm
UniSNES
HandHeldLegend/UniSNES3RP2040 based SNES drop-in PCB based on HOJA library.
- Size
- 125.5 × 45.6 mm
- Copper layers
- 4
- Thickness
- 1.5 mm
- Parts
- 88
- Nets
- 86
- Pads
- 365
- Tracks, vias
- 959, 115
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Sep 2023
- Updated
- 3 Apr 2024
Overview
UniSNES is an open-source printed circuit board by HandHeldLegend, from the HandHeldLegend/UniSNES repository on GitHub. It is a 4-layer board of 125.5 × 45.6 mm with 88 parts on 86 nets, routed with 959 tracks and 115 vias.
It is built around the RP2040, GD25Q80EEIGR and XC6222B331PR-G, with the CUS08F30, BSS138DW-7-F-ES and AO3400A among its other parts. Its parts include 20 resistors, 10 capacitors, 10 inductors, 5 transistors and 4 diodes. It belongs with the RP2040 boards of this library.
Main components
9
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
GD25Q80EEIGR
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 11uA 133MHz 2.7V~3.6V 20 Years 400us 8Mbit SPI USON-8-EP(2x3) NOR FLASH ROHSGigaDevice Semicon BeijingNOR FLASH
XC6222B331PR-G
SOT-89-5-40℃~+85℃@(Ta) 1 200mV@(300mA) 220uA 3.3V 65dB@(1kHz) 6V 700mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Output discharge、Reverse-polarity current protection Positive SOT-89-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CUS08F30
SOD-323Schottky DiodesDOWO
BSS138DW-7-F-ES
SOT-363-55℃~+150℃ 1.5Ω@10V、1.6Ω@4.5V 1V 2 N-Channel 2.2pF 25pF 410mA 417mW 60V 650pC@4.5V 9.7pF N-Channel SOT-363 MOSFETs ROHSElecSuperMOSFETs
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
1TS026A-1000-0550-CT
SMD-4P,2.6x1.6mm-40℃~+90℃ 0.55mm 1.6mm 12V 1N 2.6mm 200,000 Cycles 50mA Black IP68 No Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD-4P,2.6x1.6mm Tactile Switches ROHSHYPTactile Switches
CSTNE12M0GH5L000R0
SMD3213-3P-40℃~+85℃ 12MHz 30Ω 33pF SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdUniSNES
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 36-8730 | hhl:KS_8730 | T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 |
| 10 | SK6805-EC-15 | hhl:SK6805-EC-15 | L1, L2, L3, L4, L5, L6, L7, L8, L9, L10 |
| 8 | 1k | Resistor_SMD:R_0201_0603Metric | R2, R3, R8, R9, R10, R11, R12, R13 |
| 6 | 100n | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C4, C6, C7 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 10k | Resistor_SMD:R_0201_0603Metric | R4, R7, R16, R18, R19 |
| 4 | BPAD | hhl:progcc_bpad | BPA1, BPB1, BPX1, BPY1 |
| 4 | DPAD | hhl:progcc_dpad | DPD1, DPL1, DPR1, DPU1 |
| 3 | CUS08F30 | Diode_SMD:D_SOD-323_HandSoldering | D5, D6, D7 |
| 3 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2, F3 |
| 2 | 100R | Resistor_SMD:R_0201_0603Metric | R17, R20 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 27 | Resistor_SMD:R_0201_0603Metric | R5, R6 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R14, R15 |
| 2 | 78171-0002 | hhl:78171-0002 | TRL1, TRR1 |
| 2 | BSS138DW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1, Q2 |
| 2 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q3, Q5 |
| 2 | SPAD | hhl:snes_pad | SPSEL1, SPST1 |
| 1 | 1-1470108-0 | hhl:114701080 | J2 |
| 1 | 1TS026A-1000-0550 | hhl:1TS026A-1000-0550 | SW1 |
| 1 | 1u | Capacitor_SMD:C_0201_0603Metric | C5 |
| 1 | 330 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 47uF 6.3v | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C8 |
| 1 | Crystal_GND3 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | GD25Q80EEIGR | hhl:USON-8-EP(2x3) | U1 |
| 1 | M7C | Diode_SMD:D_SOD-123 | D1 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | USB_C_Receptacle | hhl:U06-CF2A5R-037 | J1 |
| 1 | Val** | hhl:FP_RPLAYGROUND_LOGO | Ref** |
| 1 | XC6222 | hhl:SOT-89-5 | U3 |
Similar boards
- 4 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
128 parts62 - 4 layers110.9 × 59.7 mm
- 4 layers125.5 × 47.1 mm
- 2 layers25.9 × 70.1 mm
- 4 layers125.7 × 65.9 mm
UGC OpenMain
HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.
117 parts3AGPL-3.0 - 4 layers110.9 × 59.7 mm
- 4 layers140 × 51.5 mm
LatteJr Main Board
HandHeldLegend/Latte-Jr-HW
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
129 parts
Questions
How big is the UniSNES PCB?
It measures 125.5 × 45.6 mm and has 4 copper layers, 1.5 mm thick.
What parts does the UniSNES use?
88 parts, built around the RP2040, GD25Q80EEIGR, XC6222B331PR-G and CUS08F30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UniSNES KiCad files?
From the HandHeldLegend/UniSNES repository on GitHub, at the commit this page was made from: the board is PCB/UniSNES.kicad_pcb and its schematic PCB/UniSNES.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UniSNES design in my own project?
Its repository states no licence, so its author keeps all rights: ask HandHeldLegend before reusing the design.