2 layers
2 layers325 × 150 mm
Basic Wireless 60% Keyboard
- Size
- 325 × 150 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 160
- Nets
- 124
- Pads
- 765
- Tracks, vias
- 875, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jul 2025
- Updated
- 24 Jul 2025
Overview
W60 is an open-source printed circuit board by hanaeatsplanes, from the hanaeatsplanes/W60 repository on GitHub. It is a 2-layer board of 325 × 150 mm with 160 parts on 124 nets, routed with 875 tracks and 35 vias.
It is built around the RP2040, W25Q128JVPIQ and AP2112K-3.3TRG1, with the DW01A, ABM8-272-T3 and AO4892 among its other parts. Its parts include 61 diodes, 61 switches, 20 capacitors, 8 resistors and 5 ICs. It belongs with the RP2040 boards of this library.
Main components
6
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH
AP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery Management
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
AO4892
SOIC-8-55℃~+150℃ 100V 12nC@10V 2 N-Channel 2.8V 2W 32pF 3pF 415pF 4A 68mΩ@10V SOIC-8 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
160| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | D | Diode_SMD:D_0201_0603Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +45 |
| 46 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW10, SW11, SW12, SW13, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +30 |
| 11 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C18, C20 |
| 7 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW54, SW55, SW56, SW58, SW59, SW60, SW61 |
| 3 | 1μF Ceramic | Capacitor_SMD:C_0201_0603Metric | C12, C14, C15 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 1u | Capacitor_SMD:C_0201_0603Metric | C10, C11 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW15, SW28 |
| 2 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_2.25u_PCB | SW41, SW42 |
| 1 | 0.1uF polarized | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 1μF ceramic | Capacitor_SMD:C_0201_0603Metric | C13 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AO4892 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | AP2112K-3.3TRG1 | AP2112K_3_3TRG1:SOT95P285X140-5N | U2 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | MAX1555EZK_T | MAX1555EZK_T:SOT95P275X110-5N | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_FSMSM | BT62 |
| 1 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB | SW14 |
| 1 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_2.75u_PCB | SW53 |
| 1 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_1.75u_PCB | SW29 |
| 1 | SW_Push_45deg | Button_Switch_Keyboard:SW_Cherry_MX_6.25u_PCB | SW57 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U5 |
Questions
How big is the W60 PCB?
It measures 325 × 150 mm and has 2 copper layers, 1.6 mm thick.
What parts does the W60 use?
160 parts, built around the RP2040, W25Q128JVPIQ, AP2112K-3.3TRG1 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the W60 KiCad files?
From the hanaeatsplanes/W60 repository on GitHub, at the commit this page was made from: the board is W60.kicad_pcb and its schematic W60.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the W60 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hanaeatsplanes before reusing the design.
Similar boards
- 4 layers50.8 × 22.9 mm
Eos feather rp2040
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
56 parts8MIT - 2 layers151 × 98 mm
- 2 layers169.2 × 98.2 mm
- 2 layers228.6 × 80.7 mm
Open keyboard
PanosEconomou/open-keyboard
A 100% from scratch open source super cool awesome keyboard that will take years to make if ever
136 parts - 4 layers65 × 20 mm
- 2 layers83.7 × 61.7 mm
- 4 layers83.7 × 61.7 mm
