2 layers65 × 56 mm
2 layers70.4 × 53.3 mm
Tr2018-badge
hackzone/tr18-badge1Event badge for The Reality 2018
- Size
- 70.4 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 28
- Pads
- 85
- Tracks, vias
- 243, 18
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Aug 2018
- Updated
- 5 Sep 2018
Overview
Tr2018-badge is an open-source printed circuit board by hackzone, from the hackzone/tr18-badge repository on GitHub, published under the MIT licence. It is a 2-layer board of 70.4 × 53.3 mm with 23 parts on 28 nets, routed with 243 tracks and 18 vias.
Its parts include 6 diodes, 5 resistors, 4 switches, 2 connectors and 1 IC. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
README
README.mdtr2018-badge
Event badge for The Reality 2018
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED | LEDs:LED_D5.0mm | D1, D2, D3, D4, D5, D6 (opt.) |
| 4 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4 |
| 2 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1, J2 |
| 2 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW3, SW4 |
| 1 | All 10k (opt.) | Resistors_SMD:R_0603_HandSoldering | R5 |
| 1 | Battery_Cell | Battery_Holders:Keystone_1058_1x2032-CoinCell | BT1 |
| 1 | Defcon Shitty AddOn (opt.) > | ShittyAddOn:Badgelife-Shitty-2x2 | X1 |
| 1 | ESP8266 (opt.) | ESP8266:ESP-12E_SMD | U1 |
| 1 | LOGO | modules:wingstext | Wings |
| 1 | LOGO | modules:fill_mask | G*** |
| 1 | SW_SPDT | modules:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | SW_SPDT | Buttons_Switches_SMD:SW_SPDT_PCM12 | SW5 (opt.) |
The 22 most common of 23 parts.
Questions
How big is the Tr2018-badge PCB?
It measures 70.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tr2018-badge use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tr2018-badge KiCad files?
From the hackzone/tr18-badge repository on GitHub, at the commit this page was made from: the board is tr2018-badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tr2018-badge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258