Skip to the content
2 layers65 × 90.5 mmPixeldust2, the printed circuit board in 3D

Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

Size
65 × 90.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
58
Pads
173
Tracks, vias
335, 39
Routed
Yes
KiCad
KiCad 8.99 (file 20241129)
Created
28 Mar 2025
Updated
6 May 2025

Overview

Pixeldust2 is an open-source printed circuit board by hackclub, from the hackclub/pixeldust repository on GitHub. It is a 2-layer board of 65 × 90.5 mm with 52 parts on 58 nets, routed with 335 tracks and 39 vias.

It is built around the ESP32-S3-DEVKITC-1-N8, AHT20 and SK6812MINI-E. Its parts include 18 capacitors, 16 diodes, 13 connectors, 2 resistors and 1 IC. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

Pixeldust 🌟

Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

The website is still under development (guides etc. have been created yet) But the home page of the site has been created

What is Pixeldust?

This is a brand new (in development) YSWS where you design your own neopixel-based PCB trinket, and we'll ship it to you for free! Make sure to join #pixeldust in the slack so you dont miss out!!

You ship...

  • A PCB design for the board
  • Working firmware to control the neopixels

We ship...

  • 1 fully assembled PCB

    • This will include your XIAO RP2040 as well as the neopixels
  • 2 unassembled PCBs

Requirements

  • Your firmware must be working!!! We won't approve any without.
  • It must be more complex than just a simple blinking LED
  • Your PCB cannot exceed 100cm^2
  • Your PCB must only use 2 layers

Parts

52
QtyValueFootprintReferences
160.1microFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16
16SK6812MINILED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
3Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1, J2, J4
2100microFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC17, C18
2300OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
2Conn_01x01_SocketConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ6, J7
2Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ5, J12
2LOGOLOGOG***, G***
1AHT20Connector_PinHeader_2.54mm:Adafruit_AHT20J8
1ESP32-S3-DevKitCSSD1306:ESP32-S3-DevKitCU1
1MID_LConnector_PinSocket_1.27mm:PinSocket_1x01_P1.27mm_VerticalJ14
1MID_RConnector_PinSocket_1.27mm:PinSocket_1x01_P1.27mm_VerticalJ13
1TOUCH11self:TOUCHJ11
1TOUCH12self:TOUCHJ10
1TOUCH13self:TOUCHJ9

More from hackclub/pixeldust

12
  • 2 layers136.9 × 148.5 mmPixel Dust, the printed circuit board in 3D

    Pixel Dust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    404 parts7
  • 2 layers114.3 × 40.3 mmPixeldustactual, the printed circuit board in 3D

    Pixeldustactual

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    268 parts7
  • 2 layers100 × 100 mmLedboard, the printed circuit board in 3D

    Ledboard

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    239 parts7
  • 2 layers84.3 × 97.1 mmPixle LED, the printed circuit board in 3D

    Pixle LED

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    146 parts7
  • 2 layers100 × 100 mmWeatherRing, the printed circuit board in 3D

    WeatherRing

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    146 parts7
  • 2 layers100 × 100 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    122 parts7
  • 2 layers58.4 × 25 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    116 parts7
  • 2 layers103.5 × 75.8 mmPixel, the printed circuit board in 3D

    Pixel

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    108 parts7
  • 2 layers100 × 100 mmPixelDust, the printed circuit board in 3D

    PixelDust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    107 parts7
  • 2 layers81.5 × 85 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    92 parts7
  • 2 layers60 × 28 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    86 parts7
  • 2 layers95 × 85.8 mmPixel, the printed circuit board in 3D

    Pixel

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    86 parts7

Similar boards

  • 4 layers25.4 × 75 mmFiit esp32-kit pcb, the printed circuit board in 3D

    Fiit esp32-kit pcb

    999matej999/fiit-esp32-kit

    FIIT ESP32 Kit

    81 partsGPL-3.0
  • 2 layers324.6 × 116.7 mmKeyboard, the printed circuit board in 3D

    Keyboard

    FelTell/Keyboard-FT

    WIP. A keyboard with a notebook-like layout. Using an ESP32-S3 as microcontroller.

    215 parts
  • 2 layers340.7 × 119.3 mmMechaboard, the printed circuit board in 3D

    Mechaboard

    Taohidul-Islam/The-MechaBoard

    A custom 75% 84 keys mechanical keyboard

    358 partsMIT
  • 2 layers80 × 129.1 mmSmart Plant, the printed circuit board in 3D

    Smart Plant

    JGAguado/Smart_Plant

    The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

    75 parts303
  • 2 layers168.9 × 123.3 mmOEM ECU, the printed circuit board in 3D

    OEM ECU

    aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware

    Volvo MKII Open Hardware

    296 parts161CC0-1.0
  • 4 layers154.5 × 112.9 mmLibrePLC32, the printed circuit board in 3D

    LibrePLC32

    AndreiVladescu/LibrePLC32

    The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.

    295 parts14CERN-OHL-P-2.0
  • 4 layers100 × 100 mmLabathome pcb, the printed circuit board in 3D

    Labathome pcb

    klaus-liebler/labathome

    Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.

    292 parts5MIT
  • 2 layers85 × 100 mmPcad ASCII, the printed circuit board in 3D

    Pcad ASCII

    oldgerman/SAU-G0

    迷你低功耗温湿度计,可定时自动唤醒记录数据保存并串口导出文本表格

    275 parts5

Questions

How big is the Pixeldust2 PCB?

It measures 65 × 90.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pixeldust2 use?

52 parts, built around the ESP32-S3-DEVKITC-1-N8, AHT20 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pixeldust2 KiCad files?

From the hackclub/pixeldust repository on GitHub, at the commit this page was made from: the board is submissions/glowstick/src/pixeldust2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pixeldust2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.