Skip to the content
2 layers324.6 × 116.7 mmKeyboard, the printed circuit board in 3D

WIP. A keyboard with a notebook-like layout. Using an ESP32-S3 as microcontroller.

Size
324.6 × 116.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
215
Nets
163
Pads
885
Tracks, vias
772, 41
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
16 Jul 2023
Updated
31 Oct 2026

Overview

Keyboard is an open-source printed circuit board by FelTell, from the FelTell/Keyboard-FT repository on GitHub. It is a 2-layer board of 324.6 × 116.7 mm with 215 parts on 163 nets, routed with 772 tracks and 41 vias.

It is built around the ESP32-S3-DEVKITC-1-N8 and SK6812MINI-E. Its parts include 81 diodes, 81 switches, 37 resistors, 4 connectors and 1 IC. It belongs with the keyboards and input boards and the ESP32 boards of this library.

Main components

2

Parts

215
QtyValueFootprintReferences
81Dkbd:D3_TH_SMD_v2D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +65
70KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00uS1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +54
37330RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +21
6TestPointConnector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical3V3, 3V3-2, 5V, 5V-2, GND, GND-2
4Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJ3V1, J3V2, J5V1, J5V2
4KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.25uS57, S71, S76, S78
3Stabilizer 2uPCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00uH2, H3, H4
2KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.50uS30, S43
1ESP32-S3-DevKitCPCM_Espressif:ESP32-S3-DevKitCU1
1KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.25uS56
1KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.75uS44
1KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.75uS69
1KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_6.25uS75
1KeyPCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00uS29
1SK6812MINIkbd:SK6812MINI_revL1
1Stabilizer 6.5uPCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_6.25uH1

Similar boards

  • 2 layers340.7 × 119.3 mmMechaboard, the printed circuit board in 3D

    Mechaboard

    Taohidul-Islam/The-MechaBoard

    A custom 75% 84 keys mechanical keyboard

    358 partsMIT
  • 2 layers65 × 90.5 mmPixeldust2, the printed circuit board in 3D

    Pixeldust2

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    52 parts7
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers129.9 × 63.6 mmTraeger rev 2.3.0.kicad pro, the printed circuit board in 3D

    Traeger rev 2.3.0.kicad pro

    jazzmonger/Traeger-PID-Controller

    Traeger Smoker/Grill Controller based on an

    45 parts36
  • 2 layers168.8 × 78.9 mmGameboy3, the printed circuit board in 3D

    Gameboy3

    ohasanov-hbrw/tribit32-advanced

    A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!

    61 parts8
  • 2 layers134.6 × 49.5 mmMem esp, the printed circuit board in 3D

    Mem esp

    fread/visvitalis

    A very simple modular relay computer

    71 parts7
  • 2 layers90 × 102 mmPL Toon, the printed circuit board in 3D

    PL Toon

    pl-toon/pl-toon-codes

    PL-TOON material

    39 parts7
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6

Questions

How big is the Keyboard PCB?

It measures 324.6 × 116.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard use?

215 parts, built around the ESP32-S3-DEVKITC-1-N8 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the FelTell/Keyboard-FT repository on GitHub, at the commit this page was made from: the board is Hardware/Keyboard.kicad_pcb and its schematic Hardware/Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask FelTell before reusing the design.