Skip to the content
2 layers100 × 100 mmPixeldust, the printed circuit board in 3D

Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
23
Pads
96
Tracks, vias
79, 2
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Mar 2025
Updated
6 May 2025

Overview

Pixeldust is an open-source printed circuit board by hackclub, from the hackclub/pixeldust repository on GitHub. It is a 2-layer board of 100 × 100 mm with 24 parts on 23 nets, routed with 79 tracks and 2 vias.

It is built around the GH39FKSW and SK6812MINI-EA. Its parts include 9 diodes, 4 ICs, 3 switches and 1 capacitor. It belongs with the RP2040 boards of this library.

Main components

2

README

README.md

Pixeldust 🌟

Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

The website is still under development (guides etc. have been created yet) But the home page of the site has been created

What is Pixeldust?

This is a brand new (in development) YSWS where you design your own neopixel-based PCB trinket, and we'll ship it to you for free! Make sure to join #pixeldust in the slack so you dont miss out!!

You ship...

  • A PCB design for the board
  • Working firmware to control the neopixels

We ship...

  • 1 fully assembled PCB

    • This will include your XIAO RP2040 as well as the neopixels
  • 2 unassembled PCBs

Requirements

  • Your firmware must be working!!! We won't approve any without.
  • It must be more complex than just a simple blinking LED
  • Your PCB cannot exceed 100cm^2
  • Your PCB must only use 2 layers

Parts

24
QtyValueFootprintReferences
9SK6812MINI-EAEasyEDA:LED-SMD_4P-L3.2-W2.8_SK6812MINI-EALED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9
4LOGOLOGOG***, G***, G***, G***
3clipboard:f5690bc4-41df-47e9-81cb-ee26dcf46469, ,
3GH39FKSWEasyEDA:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BRU1, U3, U4
3SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3
1CL10B224KA8NNNCEasyEDA:C0603C1
1XIAO-RP2040-DIPSeeed Studio XIAO Series Library:XIAO-RP2040-DIPU2

More from hackclub/pixeldust

12
  • 2 layers136.9 × 148.5 mmPixel Dust, the printed circuit board in 3D

    Pixel Dust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    404 parts7
  • 2 layers114.3 × 40.3 mmPixeldustactual, the printed circuit board in 3D

    Pixeldustactual

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    268 parts7
  • 2 layers100 × 100 mmLedboard, the printed circuit board in 3D

    Ledboard

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    239 parts7
  • 2 layers84.3 × 97.1 mmPixle LED, the printed circuit board in 3D

    Pixle LED

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    146 parts7
  • 2 layers100 × 100 mmWeatherRing, the printed circuit board in 3D

    WeatherRing

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    146 parts7
  • 2 layers100 × 100 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    122 parts7
  • 2 layers58.4 × 25 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    116 parts7
  • 2 layers103.5 × 75.8 mmPixel, the printed circuit board in 3D

    Pixel

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    108 parts7
  • 2 layers100 × 100 mmPixelDust, the printed circuit board in 3D

    PixelDust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    107 parts7
  • 2 layers81.5 × 85 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    92 parts7
  • 2 layers60 × 28 mmPixeldust, the printed circuit board in 3D

    Pixeldust

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    86 parts7
  • 2 layers95 × 85.8 mmPixel, the printed circuit board in 3D

    Pixel

    hackclub/pixeldust

    Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!

    86 parts7

Similar boards

  • 2 layers63.5 × 58 mmLatest, the printed circuit board in 3D

    Latest

    minipadKB/minipad

    The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.

    39 parts52GPL-3.0
  • 4 layers267 × 75 mmFracture, the printed circuit board in 3D

    Fracture

    SharKingStudios/Fracture

    An infinitely expandable, velocity sensing split midi keyboard.

    208 parts10MIT
  • 2 layers61 × 58.4 mmHallpico, the printed circuit board in 3D

    Hallpico

    plushugh/hallpico

    An RP2040 Pro Micro (nologotech) based analog magnetic Hall Effect 4-key keypad

    20 parts6
  • 4 layers285 × 94.6 mmHE75, the printed circuit board in 3D

    HE75

    jridgewell/HE75

    A standard 60% keyboard featuring 75 hall effect keys in an ortholinear layout

    283 parts5
  • 2 layers301.8 × 97 mmM256-WHE, the printed circuit board in 3D

    M256-WHE

    peppapighs/M256-WHE

    M256-WHE is a Hall-effect keyboard PCB, specifically designed for Mode Encore, Mode SixtyFive v2, and Mode Envoy [1].

    318 parts4GPL-3.0
  • 2 layers66 × 53 mmRoxpad, the printed circuit board in 3D

    Roxpad

    roxandtol/roxpad

    A simple 3k keypad, designed specifically for osu!

    8 parts3GPL-2.0
  • 2 layers280 × 184.5 mmZBox3-0, the printed circuit board in 3D

    ZBox3-0

    zrider99zr/ZBoxHardware

    131 parts3
  • 4 layers50.8 × 45.7 mmHall2040, the printed circuit board in 3D

    Hall2040

    plushugh/hall2040

    An RP2040 based hall effect keypad

    46 parts2

Questions

How big is the Pixeldust PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pixeldust use?

24 parts, built around the GH39FKSW and SK6812MINI-EA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pixeldust KiCad files?

From the hackclub/pixeldust repository on GitHub, at the commit this page was made from: the board is submissions/duykhanh09103_PixelPad/src/pixeldust.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pixeldust design in my own project?

Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.