2 layers284.2 × 55.6 mm
2 layers280 × 184.5 mm
ZBox3-0
zrider99zr/ZBoxHardware3- Size
- 280 × 184.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 131
- Nets
- 103
- Pads
- 471
- Tracks, vias
- 1,235, 126
- Pours
- 48
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Sep 2024
- Updated
- 8 Sep 2024
Overview
ZBox3-0 is an open-source printed circuit board by zrider99zr, from the zrider99zr/ZBoxHardware repository on GitHub. It is a 2-layer board of 280 × 184.5 mm with 131 parts on 103 nets, routed with 1,235 tracks and 126 vias.
It is built around the RP2040, W25Q128JVSIQ and GH39FKSW, with the TLV73333PDBV, CD74HC4067SM96 and B5819W among its other parts. Its parts include 44 switches, 16 capacitors, 5 resistors, 4 ICs and 1 diode. It belongs with the RP2040 boards of this library.
Main components
6
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
GH39FKSW
SOT-23-3L-40℃~+85℃ 0.7% 1.8mV/Gs 15V 6mA ±100mT SOT-23-3L Linear Hall Sensors ROHSHiTrend TechLinear Hall Sensors
TLV73333PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 125mV@(300mA) 28uVrms 3.3V 300mA 34uA 5.5V 50dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CD74HC4067SM96
SSOP-24-208mil-55℃~+125℃ 15ns 16 16:1 2V~6V 5pF 70Ω 89MHz SSOP-24-208mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
Parts
131| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | Hall_Sensor | Package_TO_SOT_SMD:SOT-23 | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +26 |
| 42 | MountingHole | 3-0-Schema:Reference | KH1, KH2, KH10, KH11, KH12, KH13, KH14, KH15, KH16, KH17, KH18, KH19, KH20, KH21, KH22, KH23 +26 |
| 12 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C6, C7, C9, C10, C11, C14 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C12, C13, locked, locked |
| 3 | CD74HC4067SM | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | AM1, AM2, AM3 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | locked, locked |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SW_Push | kicad-open:TS-1187A-B-A-B | SW1, SW2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D43 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | OLED_Board | SSD1306:128x64OLED | U1 |
| 1 | RP2040 | RP2040:RP2040-QFN-56 | U2 |
| 1 | TLV73333PDBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | USB_C_Receptacle | USB:Shou Han Type-C 24P QCHT | J5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U6 |
Similar boards
- 2 layers78 × 129 mm
Prototype Numpad
justDeeevin/PiPad-17-KiCAD
KiCAD files for my PiPad 17's PCB. Includes files to use with JLCPCB's assembly service.
55 parts - 2 layers327 × 160.5 mm
Analog keyboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
198 parts915 - 2 layers323.9 × 123.8 mm
- 2 layers63.5 × 58 mm
Latest
minipadKB/minipad
The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.
39 parts52GPL-3.0 - 4 layers50.8 × 45.7 mm
- 4 layers285 × 94.6 mm
HE75
jridgewell/HE75
A standard 60% keyboard featuring 75 hall effect keys in an ortholinear layout
283 parts5 - 2 layers318.7 × 106.4 mm
HE Keyboard Trial
IHW1012/HE-Keyboard-Trial
Adjusted Void Keyboard from RIskable to fit 65% layout of 66-keys + 1 rotary encoder keyboard
246 parts1
Questions
How big is the ZBox3-0 PCB?
It measures 280 × 184.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ZBox3-0 use?
131 parts, built around the RP2040, W25Q128JVSIQ, GH39FKSW and TLV73333PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZBox3-0 KiCad files?
From the zrider99zr/ZBoxHardware repository on GitHub, at the commit this page was made from: the board is PCB/4-0-SchemaAnalog/ZBox3-0.kicad_pcb and its schematic PCB/4-0-SchemaAnalog/ZBox3-0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZBox3-0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask zrider99zr before reusing the design.