2 layers136.9 × 148.5 mm
Pixel Dust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
404 parts7
2 layers40 × 38 mm
Anipixel
hackclub/pixeldust7Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
- Size
- 40 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 52
- Pads
- 171
- Tracks, vias
- 192, 34
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Mar 2025
- Updated
- 6 May 2025
Overview
Anipixel is an open-source printed circuit board by hackclub, from the hackclub/pixeldust repository on GitHub. It is a 2-layer board of 40 × 38 mm with 29 parts on 52 nets, routed with 192 tracks and 34 vias.
It is built around the ESP32-WROOM-32E, TPS63001DRC and WS2812B. Its parts include 13 capacitors, 8 diodes, 3 resistors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TPS63001DRC
VSON-10-EP(3x3)-40℃~+85℃@(TA) 1 1.5MHz 1.8V~5.5V 3.3V 50uA Buck-Boost Buck-Boost Built-in Fixed Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdPixeldust 🌟
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
The website is still under development (guides etc. have been created yet) But the home page of the site has been created
What is Pixeldust?
This is a brand new (in development) YSWS where you design your own neopixel-based PCB trinket, and we'll ship it to you for free! Make sure to join #pixeldust in the slack so you dont miss out!!
You ship...
- A PCB design for the board
- Working firmware to control the neopixels
We ship...
-
1 fully assembled PCB
- This will include your XIAO RP2040 as well as the neopixels
-
2 unassembled PCBs
Requirements
- Your firmware must be working!!! We won't approve any without.
- It must be more complex than just a simple blinking LED
- Your PCB cannot exceed 100cm^2
- Your PCB must only use 2 layers
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C7, C8, C9, C11 |
| 8 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D5, D6, D7, D8, D9, D10, D11, D12 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10, C12, C13 |
| 2 | 5.1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 2.2uH | asylum:NR3015T2R2M | L1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U2 |
| 1 | TPS63001 | Package_SON:Texas_DRC0010J_ThermalVias | U5 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J7 |
More from hackclub/pixeldust
12- 2 layers114.3 × 40.3 mm
Pixeldustactual
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
268 parts7 - 2 layers100 × 100 mm
Ledboard
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
239 parts7 - 2 layers84.3 × 97.1 mm
Pixle LED
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
146 parts7 - 2 layers100 × 100 mm
WeatherRing
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
146 parts7 - 2 layers100 × 100 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
122 parts7 - 2 layers58.4 × 25 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
116 parts7 - 2 layers103.5 × 75.8 mm
Pixel
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
108 parts7 - 2 layers100 × 100 mm
PixelDust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
107 parts7 - 2 layers81.5 × 85 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
92 parts7 - 2 layers60 × 28 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
86 parts7 - 2 layers95 × 85.8 mm
Pixel
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
86 parts7
Similar boards
- 4 layers105.6 × 104.8 mm
- 4 layers70 × 50 mm
Isc motorbeep
ISC-HEI/isc-motorbeep
ESP32 board driving two bipolar stepper motors and a speaker from 3x AA cells — a complete KiCad 9 schematic authored headlessly via MCP. ERC-clean, netlist-asserted, priced BOM.
69 parts - 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers210 × 31 mm
Trhw
nimitvijayvargee/trhw
This is an RP2040 ruler that implements wifi, bluetooth, BLE along with a 4MB Flash storage, LEDs, Input buttons and some cool units and lengths!
59 parts8 - 2 layers82.4 × 40.4 mm
Esp32
PageNotFound222/ESP32-S3-Custom-DevBoard-
A custom ESP32-S3 development board featuring USB-C connectivity, Li-Ion battery charging, buck-boost power regulation, RGB status indication, and expansion support for future sensor integration.
33 parts - 4 layers82.4 × 58.1 mm
- 2 layers84.3 × 50.8 mm
- 4 layers61 × 100 mm
BigCore
Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.
152 parts4CERN-OHL-W-2.0
Questions
How big is the Anipixel PCB?
It measures 40 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Anipixel use?
29 parts, built around the ESP32-WROOM-32E, TPS63001DRC and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Anipixel KiCad files?
From the hackclub/pixeldust repository on GitHub, at the commit this page was made from: the board is submissions/anipixel/src/anipixel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Anipixel design in my own project?
Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.