Skip to the content
2 layers305 × 126.8 mmVKeyboard, the printed circuit board in 3D

💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Size
305 × 126.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
187
Nets
125
Pads
867
Tracks, vias
789, 36
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 Apr 2023
Updated
31 May 2025

Overview

VKeyboard is an open-source printed circuit board by hackclub, from the hackclub/OnBoard repository on GitHub. It is a 2-layer board of 305 × 126.8 mm with 187 parts on 125 nets, routed with 789 tracks and 36 vias.

It is built around the ATMEGA32U4-AU and PRTR5V0U2X. Its parts include 84 diodes, 8 capacitors, 6 resistors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Hop Onboard banner logo

Onboard has ended now :/
But much more to come! Stay tuned :). Sign up here.

OnBoard - Get a $100 grant and make a PCB!

"I’m so glad that young people can create things like PC boards online. May your creativity have no limits!”

– Steve Wozniak, Apple co-founder endorsing Hack Club OnBoard

It's easier than ever for high school students to get involved with programming; all you need is a computing device and internet access. Yet, it's not the same for hardware. While PCB fabs have greatly increased the accessibility for professionally done boards, there is still no clear way for high school students to jump in. This is where OnBoard comes in.


Every student will receive up to $100 to cover PCB manufacturing costs, and join a community of peers– some more beginner and some more experienced.

Requirements

Every design/submission needs to meet the following constraints to be approved:

  • Unique and open-source design
  • Must be orderable on JLCPCB or other approved vendor
  • Must be in high school or younger123 and show proof of school enrollment to submit

Getting Started

You can also go through a video with instructions on how to submit your grant!

Star the repo (Optional)

To follow the repo for updates and show you're participating, click the "star" button on the onboard repo.

Star the OnBoard repo

1. Join #electronics on Slack!

Our #electronics channel4 is where the party is getting started! If you haven't already joined, make sure to add yourself to the channel. And for those who are new to the Hack Club slack, sign up to our community of 13k+ makers through here (don't worry, there isn't an application).

Perhaps ping a little hello to @Kevin Yang?

2. Design a Board!

It's design time! If you've done this before, you can skip ahead to step 3. Most people reading this will be new to PCB design, so we've made a simple tutorial on making an example board.

Check out our PCB tutorials, where you'll make a design from scratch in a free online editor. This is jumping in the deep end- it won't explain everything, but it will give you a taste of what's possible. By the end you probably won't understand what you did or why you did it, but you will have a working design for a board and you'll know how to tweak and edit the design to make it your own.

If you get stuck on these tutorials, or want more example projects to learn from, post in the Slack channel to hear from others going on their journeys.

3. Upload to a Vendor and Take a Screenshot

Upload your Gerber files to JLCPCB.com and add them to your cart. JLCPCB is the default PCB manufacturer, but you can shop around 5 if there's a specific one you want to use 6. Ensure you complete the checkout process by entering your address and selecting a shipping method. Once completed, take a screenshot with all the final costs and shipping!

If you're curious what all the settings are about or how to order for assembly, check out our ordering_from_JLCPCB.md doc! To avoid excess shipping fees or customs, check out the Shipping Tips doc!

It should look like this:

Note: Your screenshot is VITAL since your project cannot be approved without it. You'll include the screenshot in your PR later.

4. Fork!

Fork the onboard repo! This is the where you'll add your project files and eventually PR from!

Fork the OnBoard repo

5. Add Your Design to Your Project Repo

From your fork of OnBoard, create a folder with your project name under OnBoard/projects. To do this, go to the projects folder and click Create new file.

Projects folder

Create new file

Then in the box labeled name your file..., type in PROJECT_NAME/README.md. This creates a README file under a folder called named after your project.

Creating a folder

After this, copy and paste the contents of TEMPLATE.md into the text editor and fill it out!

Paste in TEMPLATE.md

Once your done, press the big green Commit changes button to save!

With your README filled out, head over to add files to begin uploading your Gerber, design files, and screen shot of vendor approval.

Upload gerber files

In all, you should have the following files under your project folder:

  • README.md: A filled out TEMPLATE.md, renamed to README.md

  • cart.png: A screenshot of your order details

  • gerber.zip: This should be the file that you send off to the vendor.

  • schematic.pdf: Export the schematic from your EDA program as a PDF.

    • Go to "File > Export > PDF" in EasyEDA's Schematic tab for this.
  • src/: Make a folder called src and Whatever format your designer outputs should be included.

    • For EasyEDA STD, you need to File > Export > EasyEDA two JSON files - one from the schematic tab and one from the PCB tab.
      • Optionally, for EasyEDA STD, export a 3D Model as .obj as save it to the /src folder

    Export schematic.json in EasyEDA

    • For KiCad, read the Submitting for KiCad, add the .kicad_pcb, .kicad_sch and .kicad_pro files to your /src folder.
    • Or design.json, design.sch, design.brd, etc for other PCB Editors.

Ensure your file names are exactly the same as above.

Your PR should have a structure like this:

EasyEDA STDKiCad
EasyEDA Project ExampleKiCad Project Example

If you have all the above, you're done with this step!

6. Create a PR!

Once you've uploaded your files, you can merge them to the main repo through a pull request! Under the contribute tab of your forked repo, click the big green Open pull request.

Open a PR

That will bring you to the main repo, where you'll initiate a pull request. Follow the checklist, we'll then review your PR and you'll be off to the races!

Submission checklist

7. Get approval and order your board!

Once you submit your PR, it needs two approvals:

  • One verifying your high school enrollment documents, from HCB.
  • Another one from the engineering team, checking that your design follows the grant requirements.

These reviews typically take 24-48 business hours, and if everything is correct, we'll merge your pull request!

After your pull request gets merged, it can take up to 24 business hours for you to receive an email from HCB with a virtual credit card. Make sure to check your spam folder. Then, you can order your board!

8. Ship it!

Post photos of your board in #electronics! We can't wait to see what you make!

John sharing PCB

Example Projects

Footnotes

  1. Home school still counts! ↩

  2. If you left high school early you can also submit. ↩

  3. If you need help with ideas for proof of age, ask in our Slack and we'll help you out! here ↩

  4. This link only works after you've joined the slack. Make sure to get an invite here first. ↩

  5. Don't know which ones you can use? Check out VENDORS.md for more info! ↩

  6. If outside the US you may be charged customs which aren't covered by the grant! Check beforehand. ↩

Parts

187
QtyValueFootprintReferences
83DDiode_SMD:D_SOD-123D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +67
40.1uFCapacitor_SMD:C_0805_2012MetricC2, C3, C4, C8
210kResistor_SMD:R_0805_2012MetricR1, R4
222Resistor_SMD:R_0805_2012MetricR2, R3
222pFCapacitor_SMD:C_0805_2012MetricC6, C7
25.1kResistor_SMD:R_0805_2012MetricR5, R6
1'MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX57
1,MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX68
1-MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX27
1.MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX69
1/MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX70
10MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX26
11MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX17
110uFCapacitor_SMD:C_0805_2012MetricC5
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSolderingY1
11uFCapacitor_SMD:C_0805_2012MetricC1
12MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX18
13MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX19
14MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX20
15MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX21
1500mFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
16MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX22
17MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX23
18MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX24
19MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX25
1;MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX56
1=MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX28
1ATmega32U4-APackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1HRO-TYPE-C-31-M-12Type-C:HRO-TYPE-C-31-M-12-HandSolderingUSB1
1LOGOLOGOG***
1PRTR5V0U2XPackage_TO_SOT_SMD:SOT-143D1
1SW_PushButton_Switch_SMD:SW_SPST_SKQG_WithStemSW1
1[MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX42
1\MX_Alps_Hybrid:MX-Alps-Hybrid-1.5UMX44
1]MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX43
1aMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX47
1altMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX78
1altMX_Alps_Hybrid:MX-Alps-Hybrid-1.25UMX76
1bMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX65
1backspaceMX_Alps_Hybrid:MX-Alps-Hybrid-2U-ReversedStabilizersMX29
1bottomMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX82
1cMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX63
1caps lockMX_Alps_Hybrid:MX-Alps-Hybrid-1.75UMX46
1ctrlMX_Alps_Hybrid:MX-Alps-Hybrid-1.25UMX74
1ctrlMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX80
1dMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX49
1delMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX15
1eMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX34
1endMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX73
1enterMX_Alps_Hybrid:MX-Alps-Hybrid-2.25U-ReversedStabilizersMX58
1escMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX1
1fMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX50
1f1MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX2
1f10MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX11
1f11MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX12
1f12MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX13
1f2MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX3
1f3MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX4
1f4MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX5
1f5MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX6
1f6MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX7
1f7MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX8
1f8MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX9
1f9MX_Alps_Hybrid:MX-Alps-Hybrid-1UMX10
1gMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX51
1hMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX52
1homeMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX59
1iMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX39
1jMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX53
1kMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX54
1lMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX55
1leftMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX81
1lshiftMX_Alps_Hybrid:MX-Alps-Hybrid-2.25U-ReversedStabilizersMX60
1mMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX67
1menuMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX79
1nMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX66
1oMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX40
1pMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX41
1pgdnMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX45
1pgupMX_Alps_Hybrid:MX-Alps-Hybrid-1UMX30

The 169 most common of 187 parts.

More from hackclub/OnBoard

12
  • 2 layers299 × 82.5 mmPixelWave, the printed circuit board in 3D

    PixelWave

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    663 parts915
  • 4 layers227.1 × 84.3 mmKoeg board pcb, the printed circuit board in 3D

    Koeg board pcb

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    290 parts915
  • 2 layers327 × 160.5 mmAnalog keyboard, the printed circuit board in 3D

    Analog keyboard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    198 parts915
  • 2 layers314.3 × 108.3 mmKeyboard2, the printed circuit board in 3D

    Keyboard2

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    159 parts915
  • 2 layers281 × 117.9 mmKeyboar!, the printed circuit board in 3D

    Keyboar!

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    158 parts915
  • 2 layers309.6 × 95.3 mmLayout board, the printed circuit board in 3D

    Layout board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    157 parts915
  • 2 layers310.8 × 106.1 mmKeypad, the printed circuit board in 3D

    Keypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    150 parts915
  • 2 layers335.9 × 145.9 mmSplit70kb, the printed circuit board in 3D

    Split70kb

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    144 parts915
  • 2 layers307.3 × 117.3 mmBlahajergo, the printed circuit board in 3D

    Blahajergo

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    143 parts915
  • 4 layers55.3 × 125.9 mmMicroTAC, the printed circuit board in 3D

    MicroTAC

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    142 parts915
  • 2 layers6.3 × 81.7 mmSam sung, the printed circuit board in 3D

    Sam sung

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    139 parts915
  • 2 layers150.5 × 48 mmBattery bus, the printed circuit board in 3D

    Battery bus

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    136 parts915

Similar boards

  • 2 layers243.9 × 136.5 mmBarobord, the printed circuit board in 3D

    Barobord

    sadekbaroudi/barobord

    I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

    157 parts57
  • 2 layers217.7 × 91.1 mmAdalyn, the printed circuit board in 3D

    Adalyn

    Marbelymarble/Adalyn

    36key QAZ-like handwired keyboard

    76 parts55GPL-3.0
  • 2 layers298.8 × 122 mmUrsaminor pcb, the printed circuit board in 3D

    Ursaminor pcb

    markstory/ursa-minor-keyboard

    Design and schematics for the ursaminor keyboard

    225 parts23
  • 2 layers285.5 × 112.1 mmYacc46 plate, the printed circuit board in 3D

    Yacc46 plate

    1m38/keyboards

    yacc46 is a 44-46keys self-made keyboard.

    144 parts21MIT
  • 2 layers242.3 × 75.4 mmM3n3van, the printed circuit board in 3D

    M3n3van

    matthewdias/m3n3van

    A minivan case compatible PCB with 2x3u split space

    151 parts20MIT
  • 2 layers333.4 × 88.6 mmReverie, the printed circuit board in 3D

    Reverie

    makenova/reverie

    a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards

    140 parts14
  • 2 layers281.8 × 166.9 mmMicro redox semi split, the printed circuit board in 3D

    Micro redox semi split

    makenova/micro_redox

    A family of boards inspired by the microdox and ferris

    96 parts13
  • 2 layers276.2 × 79.8 mmMinim, the printed circuit board in 3D

    Minim

    matthewdias/minim

    A symmetrical 50% keyboard

    114 parts13MIT

Questions

How big is the VKeyboard PCB?

It measures 305 × 126.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VKeyboard use?

187 parts, built around the ATMEGA32U4-AU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VKeyboard KiCad files?

From the hackclub/OnBoard repository on GitHub, at the commit this page was made from: the board is projects/VKeyboard/src/VKeyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the VKeyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.