Skip to the content
4 layers43.7 × 40.9 mmAdam's Drone FCU, the printed circuit board in 3D

Adam's Drone FCU

hackclub/OnBoard915

💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Size
43.7 × 40.9 mm
Copper layers
4
Thickness
1.61 mm
Parts
82
Nets
110
Pads
379
Tracks, vias
740, 96
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 Apr 2023
Updated
31 May 2025

Overview

Adam's Drone FCU is an open-source printed circuit board by hackclub, from the hackclub/OnBoard repository on GitHub. It is a 4-layer board of 43.7 × 40.9 mm with 82 parts on 110 nets, routed with 740 tracks and 96 vias.

It is built around the STM32F405RGT6, ESP8285H16 and SX1280IMLTRT, with the LPS22DF, ICM-42670-P and LDL1117S33R among its other parts. Its parts include 40 capacitors, 10 resistors, 7 ICs, 7 connectors and 3 switches. It belongs with the robots and motor control boards and the ESP8266 and STM32 boards of this library.

Main components

12

README

README.md

Hop Onboard banner logo

Onboard has ended now :/
But much more to come! Stay tuned :). Sign up here.

OnBoard - Get a $100 grant and make a PCB!

"I’m so glad that young people can create things like PC boards online. May your creativity have no limits!”

– Steve Wozniak, Apple co-founder endorsing Hack Club OnBoard

It's easier than ever for high school students to get involved with programming; all you need is a computing device and internet access. Yet, it's not the same for hardware. While PCB fabs have greatly increased the accessibility for professionally done boards, there is still no clear way for high school students to jump in. This is where OnBoard comes in.


Every student will receive up to $100 to cover PCB manufacturing costs, and join a community of peers– some more beginner and some more experienced.

Requirements

Every design/submission needs to meet the following constraints to be approved:

  • Unique and open-source design
  • Must be orderable on JLCPCB or other approved vendor
  • Must be in high school or younger123 and show proof of school enrollment to submit

Getting Started

You can also go through a video with instructions on how to submit your grant!

Star the repo (Optional)

To follow the repo for updates and show you're participating, click the "star" button on the onboard repo.

Star the OnBoard repo

1. Join #electronics on Slack!

Our #electronics channel4 is where the party is getting started! If you haven't already joined, make sure to add yourself to the channel. And for those who are new to the Hack Club slack, sign up to our community of 13k+ makers through here (don't worry, there isn't an application).

Perhaps ping a little hello to @Kevin Yang?

2. Design a Board!

It's design time! If you've done this before, you can skip ahead to step 3. Most people reading this will be new to PCB design, so we've made a simple tutorial on making an example board.

Check out our PCB tutorials, where you'll make a design from scratch in a free online editor. This is jumping in the deep end- it won't explain everything, but it will give you a taste of what's possible. By the end you probably won't understand what you did or why you did it, but you will have a working design for a board and you'll know how to tweak and edit the design to make it your own.

If you get stuck on these tutorials, or want more example projects to learn from, post in the Slack channel to hear from others going on their journeys.

3. Upload to a Vendor and Take a Screenshot

Upload your Gerber files to JLCPCB.com and add them to your cart. JLCPCB is the default PCB manufacturer, but you can shop around 5 if there's a specific one you want to use 6. Ensure you complete the checkout process by entering your address and selecting a shipping method. Once completed, take a screenshot with all the final costs and shipping!

If you're curious what all the settings are about or how to order for assembly, check out our ordering_from_JLCPCB.md doc! To avoid excess shipping fees or customs, check out the Shipping Tips doc!

It should look like this:

Note: Your screenshot is VITAL since your project cannot be approved without it. You'll include the screenshot in your PR later.

4. Fork!

Fork the onboard repo! This is the where you'll add your project files and eventually PR from!

Fork the OnBoard repo

5. Add Your Design to Your Project Repo

From your fork of OnBoard, create a folder with your project name under OnBoard/projects. To do this, go to the projects folder and click Create new file.

Projects folder

Create new file

Then in the box labeled name your file..., type in PROJECT_NAME/README.md. This creates a README file under a folder called named after your project.

Creating a folder

After this, copy and paste the contents of TEMPLATE.md into the text editor and fill it out!

Paste in TEMPLATE.md

Once your done, press the big green Commit changes button to save!

With your README filled out, head over to add files to begin uploading your Gerber, design files, and screen shot of vendor approval.

Upload gerber files

In all, you should have the following files under your project folder:

  • README.md: A filled out TEMPLATE.md, renamed to README.md

  • cart.png: A screenshot of your order details

  • gerber.zip: This should be the file that you send off to the vendor.

  • schematic.pdf: Export the schematic from your EDA program as a PDF.

    • Go to "File > Export > PDF" in EasyEDA's Schematic tab for this.
  • src/: Make a folder called src and Whatever format your designer outputs should be included.

    • For EasyEDA STD, you need to File > Export > EasyEDA two JSON files - one from the schematic tab and one from the PCB tab.
      • Optionally, for EasyEDA STD, export a 3D Model as .obj as save it to the /src folder

    Export schematic.json in EasyEDA

    • For KiCad, read the Submitting for KiCad, add the .kicad_pcb, .kicad_sch and .kicad_pro files to your /src folder.
    • Or design.json, design.sch, design.brd, etc for other PCB Editors.

Ensure your file names are exactly the same as above.

Your PR should have a structure like this:

EasyEDA STDKiCad
EasyEDA Project ExampleKiCad Project Example

If you have all the above, you're done with this step!

6. Create a PR!

Once you've uploaded your files, you can merge them to the main repo through a pull request! Under the contribute tab of your forked repo, click the big green Open pull request.

Open a PR

That will bring you to the main repo, where you'll initiate a pull request. Follow the checklist, we'll then review your PR and you'll be off to the races!

Submission checklist

7. Get approval and order your board!

Once you submit your PR, it needs two approvals:

  • One verifying your high school enrollment documents, from HCB.
  • Another one from the engineering team, checking that your design follows the grant requirements.

These reviews typically take 24-48 business hours, and if everything is correct, we'll merge your pull request!

After your pull request gets merged, it can take up to 24 business hours for you to receive an email from HCB with a virtual credit card. Make sure to check your spam folder. Then, you can order your board!

8. Ship it!

Post photos of your board in #electronics! We can't wait to see what you make!

John sharing PCB

Example Projects

Footnotes

  1. Home school still counts! ↩

  2. If you left high school early you can also submit. ↩

  3. If you need help with ideas for proof of age, ask in our Slack and we'll help you out! here ↩

  4. This link only works after you've joined the slack. Make sure to get an invite here first. ↩

  5. Don't know which ones you can use? Check out VENDORS.md for more info! ↩

  6. If outside the US you may be charged customs which aren't covered by the grant! Check beforehand. ↩

Parts

82
QtyValueFootprintReferences
160.1uFCapacitor_SMD:C_0402_1005MetricC3, C6, C7, C11, C12, C16, C17, C18, C19, C20, C23, C26, C28, C30, C32, C33
71uFCapacitor_SMD:C_0402_1005MetricC15, C21, C27, C29, C35, C36, C40
410nFCapacitor_SMD:C_0402_1005MetricC2, C4, C25, C31
410pFCapacitor_SMD:C_0402_1005MetricC13, C14, C38, C39
4MountingHoleMountingHole:MountingHole_4mm_PadH1, H2, H3, H4
310kResistor_SMD:R_0402_1005MetricR1, R2, R10
32.2uFCapacitor_SMD:C_0402_1005MetricC22, C34, C37
3SW_PushTactileButton:EVQ_P7_PANSW1, SW2, SW3
21.2pFCapacitor_SMD:C_0402_1005MetricC8, C10
2220RResistor_SMD:R_0402_1005MetricR7, R9
252MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1, Y2
25k1Resistor_SMD:R_0402_1005MetricR4, R5
2Conn_JUMPERConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6, J7
10.5pFCapacitor_SMD:C_0402_1005MetricC9
10.8pFCapacitor_SMD:C_0402_1005MetricC5
10RResistor_SMD:R_0402_1005MetricR3
11.8kResistor_SMD:R_0402_1005MetricR8
112kResistor_SMD:R_0402_1005MetricR6
115uHInductor_SMD:L_0805_2012MetricL1
12.5nHInductor_SMD:L_0402_1005MetricL3
125MHzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY3
13nHInductor_SMD:L_0402_1005MetricL2
14.7uFCapacitor_SMD:C_0402_1005MetricC24
1470nFCapacitor_SMD:C_0402_1005MetricC1
1600R@100MHzInductor_SMD:L_0805_2012MetricFB1
1Conn_ESCConnector_JST:JST_SHL_SM08B-SHLS-TF_1x08-1MP_P1.00mm_HorizontalJ4
1Conn_GPSConnector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mmJ5
1Conn_SWDConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ2
1Conn_U.FLConufl:CONN1_CONUFL_TECJ3
1ESP8285H16Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalViasU1
1ICM-42670Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU6
1LDL1117S33RPackage_TO_SOT_SMD:SOT-223-3_TabPin2U5
1LEDLED_SMD:LED_0603_1608MetricD1
1LOGOSilkscreen:logoG***
1LPS22DFPackage_LGA:ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2yU4
1STM32F405RGTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU7
1SX1280IMLTRTPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm_ThermalViasU2
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1

The 80 most common of 82 parts.

More from hackclub/OnBoard

12
  • 2 layers299 × 82.5 mmPixelWave, the printed circuit board in 3D

    PixelWave

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    663 parts915
  • 4 layers227.1 × 84.3 mmKoeg board pcb, the printed circuit board in 3D

    Koeg board pcb

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    290 parts915
  • 2 layers327 × 160.5 mmAnalog keyboard, the printed circuit board in 3D

    Analog keyboard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    198 parts915
  • 2 layers305 × 126.8 mmVKeyboard, the printed circuit board in 3D

    VKeyboard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    187 parts915
  • 2 layers314.3 × 108.3 mmKeyboard2, the printed circuit board in 3D

    Keyboard2

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    159 parts915
  • 2 layers281 × 117.9 mmKeyboar!, the printed circuit board in 3D

    Keyboar!

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    158 parts915
  • 2 layers309.6 × 95.3 mmLayout board, the printed circuit board in 3D

    Layout board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    157 parts915
  • 2 layers310.8 × 106.1 mmKeypad, the printed circuit board in 3D

    Keypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    150 parts915
  • 2 layers335.9 × 145.9 mmSplit70kb, the printed circuit board in 3D

    Split70kb

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    144 parts915
  • 2 layers307.3 × 117.3 mmBlahajergo, the printed circuit board in 3D

    Blahajergo

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    143 parts915
  • 4 layers55.3 × 125.9 mmMicroTAC, the printed circuit board in 3D

    MicroTAC

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    142 parts915
  • 2 layers6.3 × 81.7 mmSam sung, the printed circuit board in 3D

    Sam sung

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    139 parts915

Similar boards

  • 4 layers42 × 65 mmIcarus Flight Computer, the printed circuit board in 3D

    Icarus Flight Computer

    daedalus-ind/icarus-hardware

    Hardware of the onboard flight computer for the Icarus rocket.

    106 parts2MIT
  • 6 layers39.5 × 39.5 mmAD1 2.4G, the printed circuit board in 3D

    AD1 2.4G

    Paschalis/UAV-TelemetryLink

    Receiver and transmitter solution for GCS using ELRS, mLRS, and MAVLink for reliable telemetry and control.

    55 parts11MIT
  • 4 layers37.5 × 36 mmVersion 1 M10Q HMC5883L, the printed circuit board in 3D

    Version 1 M10Q HMC5883L

    Paschalis/fc-plus-sensor-module

    FC Plus is a modular add-on board for UAV flight controllers, providing advanced telemetry, GPS, object avoidance (ToF, Sonar, IR), and LED indicators for status feedback.

    80 parts1GPL-3.0
  • 4 layers80 × 50.5 mmLoeti, the printed circuit board in 3D

    Loeti

    elagil/loeti

    Soldering equipment for JBC irons

    110 parts5
  • 4 layers33.5 × 66.8 mmNet bmp, the printed circuit board in 3D

    Net bmp

    elagil/net-bmp

    An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)

    97 parts3GPL-3.0
  • 4 layers130 × 90 mmFinal chain, the printed circuit board in 3D

    Final chain

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    206 parts3MIT
  • 4 layers76.5 × 76.9 mmBlus mini mk2, the printed circuit board in 3D

    Blus mini mk2

    blus-audio/hardware

    Audio hardware

    168 parts1CERN-OHL-S-2.0
  • 4 layers47 × 21.6 mmRotini Hardware, the printed circuit board in 3D

    Rotini Hardware

    AlfredoSystems/Rotini-Hardware

    📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)

    116 parts3MIT

Questions

How big is the Adam's Drone FCU PCB?

It measures 43.7 × 40.9 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Adam's Drone FCU use?

82 parts, built around the STM32F405RGT6, ESP8285H16, SX1280IMLTRT and LPS22DF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adam's Drone FCU KiCad files?

From the hackclub/OnBoard repository on GitHub, at the commit this page was made from: the board is projects/Adam's Drone FCU/src/Kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adam's Drone FCU design in my own project?

Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.