2 layers55 × 75 mm
2 layers37 × 41 mm
Asylum
hackclub/asylum11- Size
- 37 × 41 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 18
- Pads
- 44
- Tracks, vias
- 51, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Dec 2024
- Updated
- 26 Feb 2025
Overview
Asylum is an open-source printed circuit board by hackclub, from the hackclub/asylum repository on GitHub, published under the MIT licence. It is a 2-layer board of 37 × 41 mm with 11 parts on 18 nets, routed with 51 tracks and 9 vias.
It is built around the WEMOS D1 MINI. Its parts include 3 connectors, 2 resistors and 1 IC. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdasylum
placeholder repo for Hack Club's asylum YSWS (zach plz make the real one)
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H3, H4 |
| 2 | 10ohm | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.5x2.5mm | Button_N1, Button_P1 |
| 1 | Conn_01x03_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
Questions
How big is the Asylum PCB?
It measures 37 × 41 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Asylum use?
11 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Asylum KiCad files?
From the hackclub/asylum repository on GitHub, at the commit this page was made from: the board is designs/weather_stations/cool-cloud/pcb/asylum.kicad_pcb and its schematic designs/gameboy/gameboy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Asylum design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from hackclub/asylum
7- 2 layers50 × 75 mm
- 2 layers78 × 52 mm
- 2 layers95.2 × 39 mm
- 2 layers35.5 × 59 mm
- 2 layers66.5 × 60.3 mm
- 2 layers58 × 34.5 mm
Similar boards
- 2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
