Skip to the content
2 layers50 × 75 mmWeather, the printed circuit board in 3D
Size
50 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
23
Pads
46
Tracks, vias
87, 3
Pours
2
Routed
Yes
KiCad
KiCad 8.99 (file 20241129)
Created
16 Dec 2024
Updated
26 Feb 2025

Overview

Weather is an open-source printed circuit board by hackclub, from the hackclub/asylum repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 75 mm with 27 parts on 23 nets, routed with 87 tracks and 3 vias.

It is built around the DHT11. Its parts include 3 ICs, 3 connectors and 1 resistor.

Main components

1

README

README.md

asylum

placeholder repo for Hack Club's asylum YSWS (zach plz make the real one)

Parts

27
QtyValueFootprintReferences
2LOGOkicadlogos:communismsoldermaskG***, G***
110PCM_Resistor_THT_AKL:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1Conn_01x02_PinConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ3
1EXTRA PINSConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1LOGOkicadlogos:isromaskfG***
1LOGOkicadlogos:texasTiG***
1LOGOkicadlogos:rtxG***
1LOGOkicadlogos:boeingG***
1LOGOkicadlogos:websiteG***
1LOGOkicadlogos:signG***
1LOGOkicadlogos:methG***
1LOGOkicadlogos:Lockheedf.cuG***
1LOGOkicadlogos:isroG***
1LOGOkicadlogos:lockheedsoldermaskG***
1TFT_ST7735_SDasylum-weather:TFT_ST7735_SDU2
1WEMOS_C3_Miniasylum-weather:WEMOS_C3_miniU3
1dht11Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1~asylum-weather:TP4056U1

The 19 most common of 27 parts.

More from hackclub/asylum

7
  • 2 layers55 × 75 mmAniweather, the printed circuit board in 3D

    Aniweather

    hackclub/asylum

    37 parts11MIT
  • 2 layers95.2 × 39 mmCyberStation, the printed circuit board in 3D

    CyberStation

    hackclub/asylum

    15 parts11MIT
  • 2 layers37 × 41 mmAsylum, the printed circuit board in 3D

    Asylum

    hackclub/asylum

    11 parts11MIT
  • 2 layers66.5 × 60.3 mmWeather, the printed circuit board in 3D

    Weather

    hackclub/asylum

    11 parts11MIT
  • 2 layers58 × 34.5 mmWeather, the printed circuit board in 3D

    Weather

    hackclub/asylum

    4 parts11MIT

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Weather PCB?

It measures 50 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Weather use?

27 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Weather KiCad files?

From the hackclub/asylum repository on GitHub, at the commit this page was made from: the board is designs/weather_stations/Zypher Station/pcb/weather.kicad_pcb and its schematic designs/gameboy/gameboy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Weather design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).