
OPNpool r5
cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

Joystick is an open-source printed circuit board by grimlokason, from the grimlokason/joystick_pcb repository on GitHub. It is a 2-layer board of 220 × 210 mm with 61 parts on 57 nets, routed with 484 tracks and 44 vias.
It is built around the ESP32-C6-DEVKITC-1-N8 and DW01A. Its parts include 18 capacitors, 16 diodes, 8 switches, 5 resistors and 4 ICs. It belongs with the keyboards and input boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17 +1 |
| 16 | 4960 | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16 |
| 8 | SW_Push | ESP32-C6-DEVKITC-1-N8:KAILH_SOCKET | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | MountingHole_4.3mm_M4_Pad | MountingHole:MountingHole_4.3mm_M4_Pad | MH1, MH2, MH3, MH4 |
| 3 | Battery | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT2, BT3 |
| 2 | 10kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C18 |
| 1 | 100Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 1KΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 3 bouton header | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | 500Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 8205A | 8205A:SOT95P285X140-6N | U4 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | ESP32-C6-DEVKITC-1-N8 | ESP32-C6-DEVKITC-1-N8:MODULE_ESP32-C6-DEVKITC-1-N8 | U2 |
| 1 | HEADER-8P-65/35MIL | Lipo Rider Plus:H8-2.54-C65D35MIL | J3 |
| 1 | MAX17048G_T10 | max17048G:SON50P200X200X80-9N | U1 |
| 1 | joystick header | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J2 |

cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

embedded-purdue/IntelliThings
From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

Angelpele/F1-Steering-Wheel
F1 Functional Steering Wheel based on the ESP32

kongr45gpen/led-controller-pcb
A PCB to control LEDs (up to 5 channels) using PWM, based on an Espressif ESP32-C6 development board.

leehambley/leels
Lee LS (Lead Screw). Forked and simplified from kachurovskiy/nanoels, rewritten in Rust and simplified for a true ELS implementation not a quasi-CNC controller

Poent/RC-Snowblower
Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.


Ekam-wadhwa1/nexus.terminal
it is a portable touchscreen device with 2 displays powered by a lattepanda iota with 16gb ram and intel n150. paired with a custom built mechanical keyboard for typing,coding,streaming and web browsing
It measures 220 × 210 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the ESP32-C6-DEVKITC-1-N8 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the grimlokason/joystick_pcb repository on GitHub, at the commit this page was made from: the board is joystick.kicad_pcb and its schematic footprint/picow_vga_sd_aud.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask grimlokason before reusing the design.