Skip to the content
2 layers220 × 210 mmJoystick, the printed circuit board in 3D
Size
220 × 210 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
57
Pads
255
Tracks, vias
484, 44
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
4 Aug 2026
Updated
9 Aug 2026

Overview

Joystick is an open-source printed circuit board by grimlokason, from the grimlokason/joystick_pcb repository on GitHub. It is a 2-layer board of 220 × 210 mm with 61 parts on 57 nets, routed with 484 tracks and 44 vias.

It is built around the ESP32-C6-DEVKITC-1-N8 and DW01A. Its parts include 18 capacitors, 16 diodes, 8 switches, 5 resistors and 4 ICs. It belongs with the keyboards and input boards and the ESP32 and RISC-V boards of this library.

Main components

2

Parts

61
QtyValueFootprintReferences
17100nfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17 +1
164960LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMountLED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16
8SW_PushESP32-C6-DEVKITC-1-N8:KAILH_SOCKETSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
4MountingHole_4.3mm_M4_PadMountingHole:MountingHole_4.3mm_M4_PadMH1, MH2, MH3, MH4
3BatteryBattery:BatteryHolder_Keystone_1042_1x18650BT1, BT2, BT3
210kΩResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
1100nfCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC18
1100ΩResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6
11KΩResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR5
13 bouton headerConnector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalJ1
1500ΩResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7
18205A8205A:SOT95P285X140-6NU4
1DW01APackage_TO_SOT_SMD:SOT-23-6U3
1ESP32-C6-DEVKITC-1-N8ESP32-C6-DEVKITC-1-N8:MODULE_ESP32-C6-DEVKITC-1-N8U2
1HEADER-8P-65/35MILLipo Rider Plus:H8-2.54-C65D35MILJ3
1MAX17048G_T10max17048G:SON50P200X200X80-9NU1
1joystick headerConnector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_VerticalJ2

Similar boards

  • 2 layers63 × 58 mmOPNpool r5, the printed circuit board in 3D

    OPNpool r5

    cvonk/OPNpool

    Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

    17 parts102
  • 2 layers140 × 80 mmIntelliThings, the printed circuit board in 3D

    IntelliThings

    embedded-purdue/IntelliThings

    From IoT to AIoT: ESP32-C6 sensor nodes, Home Assistant and an LLM agent that acts through MCP

    12 parts5
  • 2 layers174.5 × 90.4 mmVolante Maquinillo, the printed circuit board in 3D

    Volante Maquinillo

    Angelpele/F1-Steering-Wheel

    F1 Functional Steering Wheel based on the ESP32

    65 parts2
  • 2 layers62.5 × 50.2 mmController, the printed circuit board in 3D

    Controller

    kongr45gpen/led-controller-pcb

    A PCB to control LEDs (up to 5 channels) using PWM, based on an Espressif ESP32-C6 development board.

    44 parts2CERN-OHL-W-2.0
  • 2 layers51 × 70.1 mmLeels breakout, the printed circuit board in 3D

    Leels breakout

    leehambley/leels

    Lee LS (Lead Screw). Forked and simplified from kachurovskiy/nanoels, rewritten in Rust and simplified for a true ELS implementation not a quasi-CNC controller

    28 parts2
  • 2 layers125 × 78.2 mmRC ESP32 V2, the printed circuit board in 3D

    RC ESP32 V2

    Poent/RC-Snowblower

    Working on designing the impeller and auger portion of the snowblower. Switched from using a worm gear assembly to a custom ring and pinion setup using a spiral bevel gear.

    84 parts2
  • 2 layers252.9 × 55 mmSulari 170V, the printed circuit board in 3D

    Sulari 170V

    antsakur/nixie-clock

    Open-source Nixie clock project. Gerbers, BOM and firmware.

    78 parts1
  • 4 layers353 × 117 mmKEYBOARD, the printed circuit board in 3D

    KEYBOARD

    Ekam-wadhwa1/nexus.terminal

    it is a portable touchscreen device with 2 displays powered by a lattepanda iota with 16gb ram and intel n150. paired with a custom built mechanical keyboard for typing,coding,streaming and web browsing

    177 parts1GPL-3.0

Questions

How big is the Joystick PCB?

It measures 220 × 210 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Joystick use?

61 parts, built around the ESP32-C6-DEVKITC-1-N8 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Joystick KiCad files?

From the grimlokason/joystick_pcb repository on GitHub, at the commit this page was made from: the board is joystick.kicad_pcb and its schematic footprint/picow_vga_sd_aud.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Joystick design in my own project?

Its repository states no licence, so its author keeps all rights: ask grimlokason before reusing the design.