2 layers80 × 150 mm
Stepper mouse-2025b
daisuke-ym/micro-mouse
[^1]: Unistep2 ライブラリを用いてほぼ最高速度で回しても約15rpmなので、 1区画進むのに約4秒かかります。 大会では16x16区画、256区画あるので、全探索するのに15分以上かかるため、 偶然を除いて競技時間10分以内に完走することは不可能です。
108 parts
2 layers100 × 100 mm
Speedometer
greentea-ssl/speedometer_pcb- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 59
- Pads
- 165
- Tracks, vias
- 369, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Apr 2025
- Updated
- 26 Apr 2025
Overview
Speedometer is an open-source printed circuit board by greentea-ssl, from the greentea-ssl/speedometer_pcb repository on GitHub. It is a 2-layer board of 100 × 100 mm with 53 parts on 59 nets, routed with 369 tracks and 17 vias.
It is built around the MMBT3904, TMBT3906,LM and L-51ROPT1D1, with the SSM3J332R,LF among its other parts. Its parts include 21 resistors, 9 transistors, 4 diodes, 4 connectors and 2 ICs. It belongs with the RP2040 boards of this library.
Main components
4
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)TMBT3906,LM
SOT-231 PNP 100 100nA 150mA 1W 250MHz 400mV 50V 5V PNP SOT-23 Bipolar (BJT) ROHSToshibaBipolar (BJT)
L-51ROPT1D1
插件,D=5mm-35℃~+85℃ 1.2mA 100nA 10mW 30V 940nm NPN 插件,D=5mm Phototransistors ROHSPARALIGHTPhototransistors
SSM3J332R,LF
SOT-23F1 P-Channel 1.2V 144mΩ@1.8V 1W 30V 560pF 65pF 6A 8.2nC@4.5V 80pF P-Channel SOT-23F MOSFETs ROHSToshibaMOSFETs
README
README.mdspeedometer
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R6, R9, R10, R11 |
| 8 | 200R | Resistor_SMD:R_0603_1608Metric | R14, R15, R16, R17, R18, R19, R20, R21 |
| 8 | MountingHole | myLib:MountingHole_3.2mm_M3_noResist | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | Conn_01x03 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J1, J2, J3, J4 |
| 3 | 470R | Resistor_SMD:R_0603_1608Metric | R3, R7, R8 |
| 3 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 3 | TMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q6, Q7, Q9 |
| 2 | 750k | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | Battery_Cell | speedometer:AA-Battery | BT1, BT2 |
| 2 | L-51ROPT1D1 | LED_THT:LED_D5.0mm_IRBlack | Q5, Q8 |
| 2 | LED | LED_THT:LED_D5.0mm_IRGrey | D2, D3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | D_Small | Diode_SMD:D_0603_1608Metric | D4 |
| 1 | D_Small | Diode_SMD:D_SOD-123 | D1 |
| 1 | OSL30561-IRA | speedometer:OSL30561-IRA | U2 |
| 1 | RESET_SW | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW2 |
| 1 | RaspberryPi-Pico | speedometer:RaspberryPi-Pico | U1 |
| 1 | SSM3J332R | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW1 |
Similar boards
- 2 layers88 × 100 mm
- 8 layers120 × 60 mm
Jetson orin baseboard
antmicro/jetson-orin-baseboard
Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX
681 parts305Apache-2.0 - 6 layers107 × 68 mm
Cm4-baseboard
antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout
516 parts36Apache-2.0 - 2 layers30 × 43 mm
Currentmeter
hnz1102/mini-current-meter
Mini Current Meter using INA228A ultra-precise digital power monitor
40 parts10 - 6 layers52 × 43 mm
Cm4-lvds adapter
antmicro/cm4-baseboard-lvds-adapter
Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays
155 parts7Apache-2.0 - 2 layers61.5 × 126.8 mm
Badge eda
theparanoids/keyhole-badge
The Paranoids have designed a sound-reactive LED electronic conference badge for DEFCON 2022. This repository contains the PCB design files for the badge and the source code to the firmware that runs on the…
88 parts7 - 2 layers185 × 98 mm
Questions
How big is the Speedometer PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Speedometer use?
53 parts, built around the MMBT3904, TMBT3906,LM, L-51ROPT1D1 and SSM3J332R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Speedometer KiCad files?
From the greentea-ssl/speedometer_pcb repository on GitHub, at the commit this page was made from: the board is speedometer.kicad_pcb and its schematic speedometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Speedometer design in my own project?
Its repository states no licence, so its author keeps all rights: ask greentea-ssl before reusing the design.