Skip to the content
4 layers83.9 × 56.2 mmArdux mini, the printed circuit board in 3D

First attempts at an all in one ZMK/Bluetooth combo board.

Size
83.9 × 56.2 mm
Copper layers
4
Thickness
1.61 mm
Parts
60
Nets
86
Pads
337
Tracks, vias
463, 84
Pours
5
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Oct 2022
Updated
21 Oct 2022

Overview

Ardux mini is an open-source printed circuit board by granitrocky, from the granitrocky/ardux_mini repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 83.9 × 56.2 mm with 60 parts on 86 nets, routed with 463 tracks and 84 vias.

It is built around the BQ24075RGT, XC6220B331MR and FC-12M. Its parts include 25 capacitors, 11 switches, 8 resistors, 4 inductors and 3 ICs. It belongs with the nRF52 and nRF5x boards of this library.

Main components

3

Parts

60
QtyValueFootprintReferences
84.7ufCapacitor_SMD:C_0402_1005MetricC1, C14, C15, C16, C22, C23, C24, C25
4100nfCapacitor_SMD:C_0402_1005MetricC3, C5, C9, C10
412pFCapacitor_SMD:C_0402_1005MetricC6, C7, C19, C20
310kResistor_SMD:R_0402_1005MetricR2, R4, R5
210uHInductor_SMD:L_0805_2012MetricL3, L4
21pFCapacitor_SMD:C_0402_1005MetricC4, C8
21ufCapacitor_SMD:C_0402_1005MetricC12, C21
25.1kResistor_SMD:R_0402_1005MetricR6, R7
2TestPoint_Pad_D2.0mmTestPoint:TestPoint_Pad_D2.0mmSWC, SWD
1 FC-12Mfootprints:FC-12M 32.7680KA-A3Y2
10Resistor_SMD:R_0402_1005MetricR1
10footprints:CherryMX_Choc_1u_reversibleSW9
11.5pFCapacitor_SMD:C_0402_1005MetricC2
1100pfCapacitor_SMD:C_0402_1005MetricC11
110MResistor_SMD:R_0402_1005MetricR3
115nHInductor_SMD:L_0402_1005MetricL2
11kResistor_SMD:R_0402_1005MetricR8
11uFCapacitor_SMD:C_0402_1005MetricC17
13.9nHInductor_SMD:L_0402_1005MetricL1
132MHz xRCGB32M000F1H50R0footprints:OSC_XRCGB32M000F1H50R0Y1
147nFCapacitor_SMD:C_0402_1005MetricC18
1820pfCapacitor_SMD:C_0402_1005MetricC13
1Afootprints:CherryMX_Choc_1u_reversibleSW2
1ANTMyAntennas:SWRA117DAE1
1BLUELED_SMD:LED_0603_1608MetricD2
1BQ24075RGTPackage_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mmU2
1Efootprints:CherryMX_Choc_1u_reversibleSW3
1Ifootprints:CherryMX_Choc_1u_reversibleSW7
1JST BatteryConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ2
1ORANGELED_SMD:LED_0603_1608MetricD1
1Power Switchfootprints:switch_MSK-12C02_smdSW1
1Rfootprints:CherryMX_Choc_1u_reversibleSW4
1Reset Switch BackButton_Switch_SMD:SW_SPST_TL3342SW11
1Reset Switch FrontButton_Switch_SMD:SW_SPST_TL3342SW10
1Sfootprints:CherryMX_Choc_1u_reversibleSW8
1Tfootprints:CherryMX_Choc_1u_reversibleSW6
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1XC6220B331MRPackage_TO_SOT_SMD:SOT-23-5U3
1Yfootprints:CherryMX_Choc_1u_reversibleSW5
1nRF52840Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mmU1

Similar boards

  • 2 layers84 × 62.3 mmMatrix slim, the printed circuit board in 3D

    Matrix slim

    andr-line/matrix_slim

    This is the successor to my original Matrix keyboard, which was far from perfect. It aims to be as compact as possible while still providing enough keys to not have to re-learn to type.

    66 parts1
  • 2 layers53.3 × 22.9 mmBluePillF4, the printed circuit board in 3D

    BluePillF4

    rogerclarkmelbourne/STM32_Pill_Boards

    Various STM32 boards in a form factor similar to the Maple Mini or Blue Pill board

    198 parts51
  • 4 layers278 × 93.5 mmCorne cherry, the printed circuit board in 3D

    Corne cherry

    yangxing844/corne-wireless

    corne-like wireless keyboard, WIP

    244 parts3GPL-3.0
  • 4 layers145.5 × 107.5 mmCorne cherry, the printed circuit board in 3D

    Corne cherry

    yangxing844/keyboard

    this stores some of my files for keyboards building

    208 parts1
  • 2 layers69 × 34.5 mmLora ch1, the printed circuit board in 3D

    Lora ch1

    0x000f1/lora-ch1

    This project is based on the ESP32 microcontroller that behaves like a bridge between mobile devices and the modules.

    37 parts
  • 4 layers106 × 88 mmLuchtmeter, the printed circuit board in 3D

    Luchtmeter

    KVR-CIBER/luchtmeter-s3

    ESP32-S3 luchtmeter: 4.3in touch, SCD41/SHT45/LTR-303, NFC, LiPo, ESPHome + behuizing

    76 parts
  • 2 layers146.5 × 75.4 mm3leaf left, the printed circuit board in 3D

    3leaf left

    marcuswu/leaf-fold

    After building my first keyboard, a Lily58, I started following r/ErgoMechKeyboards, r/olkb, and r/MechanicalKeyboards.

    62 partsMIT

Questions

How big is the Ardux mini PCB?

It measures 83.9 × 56.2 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Ardux mini use?

60 parts, built around the BQ24075RGT, XC6220B331MR and FC-12M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ardux mini KiCad files?

From the granitrocky/ardux_mini repository on GitHub, at the commit this page was made from: the board is ardux_mini.kicad_pcb and its schematic ardux_mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ardux mini design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).