
PicoFightingBoard
FeralAI/PicoFightingBoard
Open source PCB for arcade sticks using Raspberry Pi Pico.

M.2 Key E breakout board for the Librem 5 and the Librem 5 Dev Kit. The contents of this repo is licensed under the GNU GPLv3+
Librem5-m2-breakout is an open-source printed circuit board by gralco, from the gralco/librem5-m2-breakout repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 30 × 22 mm with 16 parts on 58 nets, routed with 385 tracks and 36 vias.
It is built around the SN74LV1T34DBV. Its parts include 9 connectors, 5 capacitors and 1 IC. It belongs with the interfaces and adapters and computers and single-board computers boards of this library.
M.2 Key E breakout board for the Librem 5 and the Librem 5 Dev Kit.
The contents of this repo is licensed under the GNU GPLv3+
The board should be 0.8mm thick. Make sure you select the "Gold fingers" option when ordering.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C102, C105 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C103, C104 |
| 2 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical_SMD | J103, J104 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C101 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J105 |
| 1 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical_SMD_Pin1Right | J107 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J102 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J106 |
| 1 | M.2_Key_E | librem5-m2-breakout:M.2_Key_E_Gold_Fingers | J101 |
| 1 | Micro_SD | librem5-m2-breakout:ALPS_SCHA4B0419 | J109 |
| 1 | MountingHole_Pad | librem5-m2-breakout:M.2_Mounting_Hole | H101 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U101 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_614105150721_Vertical | J108 |

FeralAI/PicoFightingBoard
Open source PCB for arcade sticks using Raspberry Pi Pico.





the78mole/km271-wifi
A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi

ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design

crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.
It measures 30 × 22 mm and has 4 copper layers, 0.8 mm thick.
16 parts, built around the SN74LV1T34DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gralco/librem5-m2-breakout repository on GitHub, at the commit this page was made from: the board is librem5-m2-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).